Synthesis and Characterisation of Unsymmetrical Porphyrazines Containing Bis(hydroxyethylthio) Substituents

Summary. Unsymmetrical porphyrazines bearing a single peripheral bis(hydroxyethylthio) moiety were synthesised by mixed condensation of bis(2-hydroxyethylthio)maleonitrile and phthalonitrile. Complexation of the thioether groups of metal-free porphyrazine with PdCl₂ further lowered the intensity of the Q-band absorption of the porphyrazine core. The new compounds were characterised by elemental analyses, IR, ¹H NMR, UV-Vis, and mass spectra.     

Metallophthalocyanines with rod-shaped substituents

4-(4′-Dioctylaminocarbonylbiphenyloxy) phthalonitrile was synthesized from 4-(4′-carboxybiphenyloxy)phthalonitrile and dioctylamine in the presence of Et₃N. Metallophthalocyanines (Zn, Co and Cu) substituted with four dioctylaminocarbonyl biphenyloxy groups on the peripheral positions were prepared from 4-(4′-dioctylaminocarbonylbiphenyloxy)phthalonitrile and the corresponding divalent metal salts (Zn(CH₃COO)₂, CoCl₂ and CuCl₂). The new phthalocyanines are soluble in common organic solvents. These compounds were characterised by ¹H-NMR, ¹³C-NMR, FT-IR, UV-Vis and mass spectroscopies.     

Unexpected formation of β, meso-directly linked diporphyrins under Adler–Longo reaction conditions

Unexpected formation of β, meso-directly linked diporphyrin products has been described in the reactions of β-formyl porphyrins with pyrrole under Adler–Longo reaction conditions. Preliminary mechanistic studies indicates that β-dipyrromethane substituted porphyrin structure is the crucial intermediate for the formation of diporphyrin product.     

Effect of Polycondensation Reaction Conditions on the Properties of Thermotropic Liquid‐Crystalline Copolyester

In this study a range of wholly aromatic copolyesters based on kink m‐acetoxybenzoic acid (m‐ABA) monomer (33 mol%) and equimolar‐linear p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephthalic acid (TPA) monomers (67 mol%) have been synthesized by melt polycondensation reaction process at 280°C and 260°C for different time intervals. Characterization of copolyesters were performed by solution viscosity measurement, wide–angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), hot‐stage polarized light microscopy, proton‐nuclear magnetic resonance analysis (¹H‐NMR). According to the results obtained, copolyesters showed thermotropic liquid crystalline behavior in an appropriate temperature range. The copolyesters were prepared in high yields. It was observed that the intrinsic viscosities of the copolyesters are increased regularly with increasing polymerization time and temperature. All the copolyesters were soluble in a trifluoroacetic acid/dichloromethane (30:70 v/v) except the copolyesters which were synthesized at 280°C in 5 h. According to the WAXD results; the degree of crystallinity of copolyesters were found to be between 5–15%. DSC and hot stage polarized light microscopy results showed that all the copolyesters are melt processable and a significant molecular interaction exist in a very broad temperature range (160°C and 165°C) in the nematic mesophase. The T_g values are increased with an increasing polycondensation reaction time and temperature and they were observed between 93–126°C. Fibers prepared by a hand‐spinning technique from the polymer melt exhibit well‐developed fibrillar structure parallel to the fiber axis.     

Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

The use of water-soluble phthalocyanines as textile dyes in nylon/elastane fabric: fastness and antibacterial effectiveness

This work reports on dyeing of nylon/elastane fabric with water-soluble phthalocyanines ( 1-4 ) bearing quinoline 5-sulfonic acid substituents on the peripheral or nonperipheral positions and determining the antibacterial efficiency of the phthalocyanine compounds and the dyed nylon/elastane fabrics. The light, washing, water, perspiration, and rubbing fastness properties of nylon/elastane fabrics dyed with phthalocyanines were also determined. The results showed that all dyed fabrics showed very good wet fastness values. The lightfastness value of the nylon/elastane fabric dyed with phthalocyanine dye ( 1 ) showed a much better value than the others. Also, the antibacterial efficiencies of the dyed nylon fabrics and the dye compounds were investigated against a gram-negative ( Escherichia coli ) and a grampositive ( Staphylococcus aureus ) bacteria by using disc diffusion method. The results showed that the dyed nylon/elastane fabrics and the compounds exhibited antibacterial activities against both bacteria.     

Novel and Stereospecific Synthesis of (2S)‐3‐(2,4,5‐Trifluorophenyl)propane‐1,2‐diol from D‐Mannitol

A stereospecific synthesis of (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol from D ‐mannitol has been developed. The reaction of 2,3‐O‐isopropylidene‐D ‐glyceraldehyde with 2,4,5‐trifluorophenylmagnesium bromide gave [(4R)‐2,2‐dimethyl‐1,3‐dioxolan‐4‐yl](2,4,5‐trifluorophenyl)methanol in 65% yield as a mixture of diastereoisomers (1 : 1). The Ph₃P catalyzed reaction of the latter with C₂Cl₆ followed by reduction with Pd/C‐catalyzed hydrogenation gave (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol with >99% ee and 65% yield.     

Investigation of clinoptilolite rich natural zeolites from Turkey: a combined XRF,TG/DTG,DTA and DSC study

Turkey clinoptilolite-rich tuffs from Gördes and Bigadiç regions of western of Anatolia and their exchanged forms (K⁺, Na⁺, Mg²⁺ and Ca²⁺) were characterized by TG/DTG-DTA, DSC and XRF methods and the surface areas were also determined for both tuffs. TG-DTG and DTA curves of all clinoptilolite samples were measured in the temperature range 30–1000 °C. All clinoptilolite samples had major, rapid mass losses between 30 and 200 °C, with slower and less significant mass losses at higher temperatures. The mass loss of the Natural-G is 9.54% while that of the Natural-B sample is 10.50%. Water content increases in the order of K < Na < Ca < Mg for Bigadiç clinoptilolite samples and in the following sequence K < Na < Mg < Ca for Gördes clinoptilolite samples. One mass loss step for all clinoptilolite samples was observed using differential scanning calorimeter (DSC) in the range of 30–550 °C.     

Influence of acid treatment on structure of clinoptilolite tuff and its adsorption of methane

This study presents the results of the methane adsorption properties of clinoptilolite tuff from Bigadic, Turkey and that of acid treated forms at 273 and 293 K up to 100 kPa using volumetric apparatus. In order to assess changes in structural and gas adsorption properties of clinoptilolite, zeolite sample was treated with acid solutions of varying concentrations (0.1, 0.5, 1.0 and 2.0 M) at 70 °C during 3 h. Structural and thermal characterization of natural and acid treated clinoptilolite samples were carried out using a combination of techniques such as X-ray diffraction, X-ray fluorescence, thermogravimetric, differential thermal analysis and nitrogen adsorption methods. At both temperatures, uptake of methane (CH₄) increased in the following order: CLN < CLN-H2 < CLN-H1 < CLN-H05 < CLN-H01. CH₄ adsorption capacities of the original and acid treated clinoptilolites were found in the range of 0.476–0.910 mmol/g and 0.398–0.691 mmol/g at 273 and 293 K, respectively.