Amperometric method for determining the degree of complexation of polyelectrolytes with cationic surfactants

The complexation of sodium polystyrene sulfonate with monovalent cationic surfactants at a microsized liquid/liquid interface has been studied using electrochemistry. The method is based on measurement of surfactant ion transfer across the interface between two immiscible electrolyte solutions (ITIES). The complexation of various cationic surfactants (alkylpyridinium- and trimethylammonium-) with oligosized polystyrene sulfonate was measured. Binding isotherms were used to determine the degree of binding as a function of the surfactant chain length and type of head group. It was found that the hydrophobicity of the surfactant was the predominant factor. The effect of the polyelectrolyte chain length on the binding mechanism was studied using cetylpyridinium chloride as a complexing agent. It was found that binding affinity, as well as cooperativity of the binding process, decreases with decreasing polyelectrolyte chain length. Thermodynamics of surfactant binding was measured using titration microcalorimetry. The thermodynamic data obtained show that the enthalpy of surfactant binding is not dependent on polymer chain length, but an increase in chain length makes the binding process entropically more favorable.     

Synthetic studies in the alkaloid field—V: Determination of the stereochemistry of several l,2,3,4,6,7,12,12b-octahydro-3-methoxycarbonylindolo-[2,3-a]quinolizine derivatives by 13C NMR spectral analysis

The C(12b)-C(2)-C(3) stereochemical relationship in several racemic 1,2,3,4,6,7,12,12b-octahydro-3-methoxycarbonylindolo [2,3-a]quinolizine derivatives has been determined by ¹³C NMR spectral analysis. The proper shift assignment was confirmed by recording the spectra of selectively deuterated derivatives. The shifts of specific carbons are found to be conformationally diagnostic. The C(12b)-C(2)-C(3) stereochemical relationship in indolo[2,3-a]quinolizines obtained by selective alkaline decarboalkoxylative cyclization of partially hydrogenated 1-[2-(3-indolyl)ethyl]3,5-dimethoxycarbonylpyridine derivatives is discussed.     

Membrane activity of biotechnological peptide drugs

Charged Langmuir-Blodgett monolayers deposited at an immobilised liquid-liquid interface have been used as a simple model for a biological membrane to investigate the membrane activity of biotechnological oligopeptide drugs.     

Cellulose nanocrystal submonolayers by spin coating

Dilute concentrations of cellulose nanocrystal solutions were spin coated onto different substrates to investigate the effect of the substrate on the nanocrystal submonolayers. Three substrates were probed: silica, titania, and amorphous cellulose. According to atomic force microscopy (AFM) images, anionic cellulose nanocrystals formed small aggregates on the anionic silica substrate, whereas a uniform two-dimensional distribution of nanocrystals was achieved on the cationic titania substrate. The uniform distribution of cellulose nanocrystal submonolayers on titania is an important factor when dimensional analysis of the nanocrystals is desired. Furthermore, the amount of nanocrystals deposited on titania was multifold in comparison to the amounts on silica, as revealed by AFM image analysis and X-ray photoelectron spectroscopy. Amorphous cellulose, the third substrate, resulted in a somewhat homogeneous distribution of the nanocrystal submonolayers, but the amounts were as low as those on the silica substrate. These differences in the cellulose nanocrystal deposition were attributed to electrostatic effects: anionic cellulose nanocrystals are adsorbed on cationic titania in addition to the normal spin coating deposition. The anionic silica surface, on the other hand, causes aggregation of the weakly anionic cellulose nanocrystals which are forced on the repulsive substrate by spin coating. The electrostatically driven adsorption also influences the film thickness of continuous ultrathin films of cellulose nanocrystals. The thicker films of charged nanocrystals on a substrate of opposite charge means that the film thickness is not independent of the substrate when spin coating cellulose nanocrystals in the ultrathin regime (<100 nm).     

Synthesis and biomimetic mineralization of l‐proline substituted polyphosphazenes as bulk and nanofiber

This work presents the synthesis of polyphosphazenes bearing L ‐proline methyl ester (ProOMe) and 4‐hydroxy‐l ‐proline methyl ester (HypOMe), aiming for new bioactive polymers for bone repair. The polymers were characterized by ¹H and ³¹P NMR, FTIR, DSC, and TGA. Electrospun fibers were prepared using poly[bis(l ‐proline methyl ester)phosphazene] (PProP), and their potential for biomimetic mineralization, as well as the bulk material, were tested in simulated body fluid (1×SBF). Samples were analyzed between 24 h and 3 weeks of incubation using SEM/EDS and FTIR. After 24 h, spherical and flower‐like shapes of calcium phosphates (CaP) were crystallized on the bulk samples. The nanofibers presented spherical CaP crystals attached to them after 48 h of incubation. The Ca/P molar ratio of the crystals varied from 1.5 to 1.6. According to this study, PProP presents bioactivity in vitro, and its fibers offer sites for CaP nucleation like the collagen fibers in bone. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1318–1327     

Quantitative assessment of the enzymatic degradation of amorphous cellulose by using a quartz crystal microbalance with dissipation monitoring

The systematic evaluation of the degradation of an amorphous cellulose film by a monocomponent endoglucanase (EG I) by using a quartz crystal microbalance with dissipation monitoring (QCM-D) identified several important aspects relevant to the study the kinetics of cellulose degradation by enzymes. It was demonstrated that, to properly evaluate the mechanism of action, steady state conditions in the experimental set up need to be reached. Rinsing or diluting the enzyme, as well as concentration of the enzyme, can have a pronounced effect on the hydrolysis. Quantification of the actual hydrolysis was carried out by measuring the film thickness reduction by atomic force microscopy after the enzymatic treatment. The values correlated well with the frequency data obtained by QCM-D measurement for corresponding films. This demonstrated that the evaluation of hydrolysis by QCM-D can be done quantitatively. Tuning of the initial thickness of films enabled variation of the volume of substrate available for hydrolysis which was then utilized in establishing a correlation between substrate volume and hydrolytic activity of EG I as measured by QCM-D. It was shown that, although the amount of substrate affects the absolute rate of hydrolysis, the relative rate of hydrolysis does not depend on the initial amount of substrate in steady state system. With this experimental setup it was also possible to demonstrate the impact of concentration on crowding of enzyme and subsequent hydrolysis efficiency. This effort also shows the action of EG I on a fully amorphous substrate as observed by QCM-D. The enzyme was shown to work uniformly within the whole volume of swollen film, however being unable to fully degrade the amorphous film.     

Acetylated derivatives of C-methylated analogues of spermidine: synthesis and interaction with N1-acetylpolyamine oxidase

1. Download high-res image (149KB)
2. Download full-size image

     

Photoswitching electron transport properties of an azobenzene containing thiol-SAM

The influence of conformational and electrical properties of azobenzene molecules on the electron transfer barrier properties of their SAMs was studied by SECM and ellipsometry.