Quantitation of SU1 1248, an oral multi-target tyrosine kinase inhibitor, and its metabolite in monkey tissues by liquid chromatograph with tandem mass spectrometry following semi-automated liquid-liquid extraction

SU11248 is a potent inhibitor of PDGFR, VEGFR, KIT, and Flt3, and is currently under Phase I clinical evaluation as an anticancer drug. A sensitive and specific analytical method for the quantitation of SU11248 and its metabolite in several monkey tissues (liver, kidney, brain and white fat) using LC-MS-MS following semi-automated liquid-liquid extraction (LLE) was developed and validated. Amounts of 50 mg of tissue were homogenized using an ultrasonic processor. After addition of the stable labelled internal standard (IS) and ammonium hydroxide (0.3%), samples were extracted with 2.5 ml of tert-butyl methyl ether. Following centrifugation, aliquots of 1.8 ml of the organic phase were transferred into a 96-well plate. The Packard Multiprobe II robotic liquid handler was used to perform all steps mentioned above. The organic phase was dried and the residue was reconstituted with 800 microl of 15 mM ammonium formate buffer solution (pH 3.25) using a Tomtec Quadra 96 workstation. Aliquots of 10 microl of the resulting solution were injected into the LC-MS-MS system. A Symmetry Shield C8 column (50 mm x 2.1 mm, 3.5 microm) was used to perform the chromatographic analysis. The mobile phase was 15 mM ammonium formate buffer solution (pH 3.25)-acetonitrile (74:26 (v/v)) with a flow-rate of 0.35 ml/min. Retention times of the metabolite and SU11248 were about 2.5 and 3.5 min, respectively. Total cycle time was 5 min. MS detection used the Applied Biosystems-MDS Sciex API 3000 with TurbolonSpray interface and multiple reaction monitoring (MRM) operated in positive ion mode. The method was validated for both compounds over the calibration range of about 2 and 2000 ng/g. The suitability and robustness of the method for in vivo samples were confirmed by analysis of monkey tissues from animals dosed with SU11248.     

Monitoring of the metal displacement from the recombinant mouse liver metallothionein Zn(7)-complex by capillary zone electrophoresis with electrospray MS detection

A solution of a Zn-complex of recombinant mouse MT-1 isoform (Zn(7)-MT-1) was prepared and titrated with Cd(2+) ions. A method based on the coupling of capillary zone electrophoresis (CZE) with electrospray MS detection was developed for the analysis of the stoichiometry of the species formed during the titration. The method offered the possibility of the on-line removal of up to 100 mM Tris or phosphate buffer solutions that would otherwise suppress the electrospray signal. By allowing the determination of the metal stoichiometry of the complex species present in solution the method was shown to be complementary to circular dichroism and UV-VIS spectrophotometry conventionally used for similar studies. The titration of the Zn(7)-MT complex with Cd(II) showed the sequential displacement of the Zn by Cd. The unusually high stability of the Cd(6)Zn(1)-MT species was observed which suggests a structural role of the remaining Zn(II) ion.     

Modular bis(oxazoline) ligands for palladium catalyzed allylic alkylation: unprecedented conformational behaviour of a bis(oxazoline) palladium eta3-1,3-diphenylallyl complex

New families of enantiopure bis(oxazolines) with 4,5-trans (5 a-g) or 4,5-cis (6 c) stereochemistry at the individual rings have been prepared in high yield. Their eta(3)-allyl palladium complexes (8 a-g, 9 c and 10) have been used as catalytic precursors in allylic alkylation reactions with excellent enantioselectivities (up to 96 %) for the trans oxazoline derivatives, while Pd/6 c system was inactive. NMR studies on palladium eta(3)-1,3-diphenylallyl intermediates (11 a, c and e) showed the presence of syn/syn- and syn/anti-allyl isomers in solution; this resembles the first example of eta(3)-eta(1)-eta(3) isomerism in Pd allylic complexes containing bis(oxazolines) derived from malonic acid.     

Hydrogen dissociation and diffusion on Ni- and Ti-doped Mg(0001) surfaces

It is well-known, both theoretically and experimentally, that alloying MgH(2) with transition elements can significantly improve the thermodynamic and kinetic properties for H(2) desorption, as well as the H(2) intake by Mg bulk. Here, we present a density functional theory investigation of hydrogen dissociation and surface diffusion over a Ni-doped surface and compare the findings to previously investigated Ti-doped Mg(0001) and pure Mg(0001) surfaces. Our results show that the energy barrier for hydrogen dissociation on the pure Mg(0001) surface is high, while it is small/null when NiTi are added to the surface as dopants. We find that the binding energy of the two H atoms near the dissociation site is high on Ti, effectively impeding diffusion away from the Ti site. By contrast, we find that on Ni, the energy barrier for diffusion is much reduced. Therefore, although both Ti and Ni promote H(2) dissociation, only Ni appears to be a good catalyst for Mg hydrogenation, allowing diffusion away from the catalytic sites. Experimental results corroborate these theoretical findings, i.e., faster hydrogenation of the Ni-doped Mg sample as opposed to the reference Mg- or Ti-doped Mg.     

Observation and mechanistic study of facile C-O bond formation between a well-defined aryl-copper(III) complex and oxygen nucleophiles

A well-defined macrocyclic aryl–Cu(III) complex (2) reacts readily with a variety of oxygen nucleophiles, including carboxylic acids, phenols and alcohols, under mild conditions to form the corresponding aryl esters, biaryl ethers and alkyl aryl ethers. The relationship between these reactions and catalytic C-O coupling methods is demonstrated by the reaction of the macrocyclic aryl–Br species with acetic acid and p-fluorophenol in the presence of 10 mol% Cu(I). An aryl-Cu(III)-Br species 2(Br) was observed as an intermediate in the catalytic reaction. Investigation of the stoichiometric C-O bond-forming reactions revealed nucleophile-dependent changes in the mechanism. The reaction of 2 with carboxylic acids revealed a positive correlation between the log(k(obs)) and the pK(a) of the nucleophile (less-acidic nucleophiles react more rapidly), whereas a negative correlation was observed with most phenols (more-acidic phenols react more rapidly). The latter trend resembles previous observations with nitrogen nucleophiles. With carboxylic acids and acidic phenols, UV-visible spectroscopic data support the formation of a ground-state adduct between 2 and the oxygen nucleophile. Collectively, kinetic and spectroscopic data support a unified mechanism for aryl-O coupling from the Cu(III) complex, consisting of nucleophile coordination to the Cu(III) center, deprotonation of the coordinated nucleophile, and C-O (or C-N) reductive elimination from Cu(III).     

Synthesis of microcin SF608

The first total synthesis of aquatic peptide microcin SF608 is described. Coupling of L-Hpla with the dipeptide L-Phe-L-Choi followed by coupling with agmatine and a deprotection step gave microcin SF608. In addition, the levorotatory character of L-Hpla (5) was thoroughly established, and the conformational analysis of L-Choi containing peptides 1 and 8-10 was performed using NMR spectroscopy to examine the cis-trans isomer equilibrium of the L-Phe-L-Choi amide bond.     

Diverse evolution of [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 2, 3) metalloligands in CH(2)Cl(2)

The nucleophilicity of the [Pt(2)S(2)] core in [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 3, dppp (1); n = 2, dppe (2)) metalloligands toward the CH(2)Cl(2) solvent has been thoroughly studied. Complex 1, which has been obtained and characterized by X-ray diffraction, is structurally related to 2 and consists of dinuclear molecules with a hinged [Pt(2)S(2)] central ring. The reaction of 1 and 2 with CH(2)Cl(2) has been followed by means of (31)P, (1)H, and (13)C NMR, electrospray ionization mass spectrometry, and X-ray data. Although both reactions proceed at different rates, the first steps are common and lead to a mixture of the corresponding mononuclear complexes [Pt[Ph(2)P(CH(2))(n)PPh(2)](S(2)CH(2))], n = 3 (7), 2 (8), and [Pt[Ph(2)P(CH(2))(n)PPh(2)]Cl(2)], n = 3 (9), 2 (10). Theoretical calculations give support to the proposed pathway for the disintegration process of the [Pt(2)S(2)] ring. Only in the case of 1, the reaction proceeds further yielding [Pt(2)(dppp)(2)[mu-(SCH(2)SCH(2)S)-S,S']]Cl(2) (11). To confirm the sequence of the reactions leading from 1 and 2 to the final products 9 and 11 or 8 and 10, respectively, complexes 7, 8, and 11 have been synthesized and structurally characterized. Additional experiments have allowed elucidation of the reaction mechanism involved from 7 to 11, and thus, the origin of the CH(2) groups that participate in the expansion of the (SCH(2)S)(2-) ligand in 7 to afford the bridging (SCH(2)SCH(2)S)(2-) ligand in 11 has been established. The X-ray structure of 11 is totally unprecedented and consists of a hinged [(dppp)Pt(mu-S)(2)Pt(dppp)] core capped by a CH(2)SCH(2) fragment.     

Kinetico‐Mechanistic Insights on the Assembling Dynamics of Allyl‐Cornered Metallacycles: The PtNpy Bond is the Keystone

The square‐like homo‐ and heterometallamacrocycles [{Pd(η³‐2‐Me‐C₃H₄)( L ⁿ )₂}₂{M(dppp)}₂](CF₃SO₃)₆ (dppp=1,3‐bis(diphenylphosphino)propane) and [{Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂}₂{M(PPh₃)₂}₂](CF₃SO₃)₆ [py=pyridine, M=Pd, Pt, L ^{n =}4‐PPh₂py ( L¹ ), 4‐C₆F₄PPh₂py ( L² )] containing allyl corners were synthesised by antisymbiotic self‐assembly of the different palladium and platinum metallic corners and the ambidentate N,P ligands. All the synthesised assemblies displayed a complex dynamic behaviour in solution, the rate of which is found to be dependent on the electronic and/or steric nature of the different building blocks. A kinetico‐mechanistic study by NMR line shape analysis of the dynamics of some of these assemblies was undertaken in order to determine the corresponding thermal activation parameters. Both an enhanced thermodynamic stability and slower dynamics were observed for platinum‐pyridine‐containing species when compared with their palladium analogues. Time‐dependent NMR spectroscopy in combination with ESI mass spectrometry was used to study the exchange between the assemblies and their building blocks, as well as that occurring between different metallamacrocycles. Preliminary studies were carried out on the activity of some of the metallamacrocyclic compounds as catalytic precursors in the allylic substitution reaction, and the results compared with that of the monometallic allylic corner [Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂]⁺.