Determination of the boiling-point distribution by simulated distillation from n-pentane through n-tetratetracontane in 70 to 80 seconds

This work presents the carrying out of boiling-point distributions by simulated distillation with direct-column heating rather than oven-column heating. Column-heating rates of 300 degrees C/min are obtained yielding retention times of 73 s for n-tetratetracontane. The calibration curves of the retention time versus the boiling point, in the range of n-pentane to n-tetratetracontane, are identical to those obtained by slower oven-heating rates. The boiling-point distribution of the reference gas oil is compared with that obtained with column oven heating at rates of 15 to 40 degrees C/min. The results show boiling-point distribution values nearly the same (1-2 degrees F) as those obtained with oven column heating from the initial boiling point to 80% distilled off. Slightly higher differences are obtained (3-4 degrees F) for the 80% distillation to final boiling-point interval. Nonetheless, allowed consensus differences are never exceeded. Precision of the boiling-point distributions (expressed as standard deviations) are 0.1-0.3% for the data obtained in the direct column-heating mode.     

Development and validation of a derivative ultraviolet spectrophotometric method for the determination of darifenacin in tablets using experimental designs and its comparison with chromatographic method

A set of experimental designs was applied to develop and validate a spectrophotometric method using derivative transformation coupled with zero-crossing methodology for the quantification of darifenacin hydrobromide in extended-release tablet form. In the presence of the matricial interference, a central composite (face-centered) design was necessary to reach the best condition without interference in the quantification. The optimal system was confirmed using the function named Derringer’s desirability to assess high precision and low quantification limit. The best condition pointed was the first order to derivative transformation, Δλ = 4, scale factor 150, scanning speed 280 nm/s and anulation point in 239.4 nm as wavelength. From these parameters it was possible to perform the method validation resulting in R ² = 0.999, concentration ranging from 0.10 to 2.50 μg/mL, recovery 98.65% and mean precision 97.67% (RSD = 0.0136). Additionally, robustness was assessed by a Plackett-Burman design, and no significant variability was obtained. The spectrophotometric method was compared with high-performance liquid chromatography method, resulting in no significant difference between the methods.     

Wake instability issues: From circular cylinders to stalled airfoils

Some recent results regarding the global dynamical behaviour of the wake of circular cylinders and airfoils with massive separation are reviewed in this paper. In order to investigate the effect of interference, the three-dimensional instability modes are analysed for the flow around two circular cylinders in tandem. In the same way, the flow around a stalled airfoil is investigated in order to provide a better understanding of the three-dimensional characteristics of wakes forming downstream of a lifting body with massive separation. These results are compared with those found for an isolated cylinder. Some fundamental differences among these flows are discussed.     

A simple HPLC-DAD method for determination of adapalene in topical gel formulation

A simple stability indicating high-performance liquid chromatography method for the analysis of adapalene in pharmaceutical gel formulation is developed and validated. An isocratic separation is performed using a Merck RP-8 (150 mm × 4.6 mm i.d., particle size 5 m) column and a mixture of acetonitrile water (67:33, v/v, pH adjusted to 2.5 with phosphoric acid) as the mobile phase. The detection is achieved with a photodiode array detector at 321 nm. The specificity of the method is verified by subjecting both the reference substance and the pharmaceutical form to hydrolytic, oxidative, photolytic, and thermal stress conditions. There is no interference from the excipients of the formulation on the determination of adapalene in gel. The response is linear over the concentration range of 8.0-16.0 μg/mL (r > 0.999) with a limit of detection and quantification of 0.04 and 0.14 μg/mL, respectively. The mean recovery is 100.8%. The RSD values for the intra- and inter-day precision studies are < 1.2%. The method is validated by reaching satisfactory results for linearity, selectivity, specificity, precision, accuracy, robustness, and system suitability.     

ACTION OF HYDROGEN PEROXIDE ON HUMAN FIBROBLAST IN CULTURE

Abstract— Human fibroblasts in culture lose the capacity of proliferating when exposed to hydrogen peroxide in the concentration range of 1 to 10 μ M . The toxicity of H₂O₂ to xeroderma pigmentosum cells (XP12RO). defective in excision repair of lesions produced by UV-irradiation, was about twice as high as to cells proficient in excision repair (VA13). This compound produces single-strand breaks in intracellular DNA but not in purified DNA. These breaks are in situ physical discontinuities rather than alkali-labile bonds, and their generation occurs at the same extent at 4°C and 37° indicating that they are not produced by an endonuclease. The results favor the hypothesis that H₂O₂ reacts in the cell producing a radical species which brings about the formation of DNA single-strand breaks. These breaks are effectively repaired by both XP12RO and VA13 fibroblasts. The possible reason for the lethality of H₂O₂ is discussed.     

Microstructure and magnetic properties of colloidal cobalt nano-clusters

The magnetic response of nanometer sized Co nanoparticles (NP) prepared using reverse micelle solutions are presented. The use of complementary structural and morphological probes (like transmission electron microscopy, high resolution electron microscopy, X-ray absorption spectroscopy) allowed to relate the magnetic properties to the size, morphology, composition and atomic structure of the nanoparticles. All data agree on the presence of a core-shell structure of NPs made of a metallic Co core surrounded by a thin Co-oxide layer. The core-shell microstructure of NPs affects its magnetic response mainly raising the anisotropy constant.     

Crystallization on heating and complex phase behavior of alpha-cyclodextrin solutions

Solutions composed of alpha-cyclodextrin (alpha-CD), water, and various methylpyridines, in particular, 4-methylpyridine (4MP), undergo reversible liquid-solid transitions upon heating, the crystalline solid phases undergoing further phase transformations at higher temperatures. This unusual behavior has been characterized by an ensemble of measurements, including solubility, differential scanning calorimetry, quasielastic neutron scattering, as well as x-ray powder diffraction. For the alpha-CD/4MP system five crystalline phases have been identified. The unit cell parameters and corresponding changes with temperature indicate a scenario for the crystallization process. A simple model is proposed that mimics the observed disorder-order transition.     

Inclusion properties of volatile organic compounds in a calixarene-based organic zeolite

The inclusion properties of a calixarene-based porous material have been studied to investigate the adsorption and the desorption of carbon tetrachloride, chloroform, and water in the zeolite-like structure. Uptake and release processes have been studied both by time-resolved powder X-ray diffraction and by thermogravimetric analysis to obtain structural and kinetic information. The selected guests are able to enter the structure with an increase in the host cell volume and with time-dependent diffusivity coefficients. Chloroform molecules act as a permanent porosity switch promoting a phase transition to non-porous triclinic form.     

SITES SENSITIVE TO S1 NUCLEASE and DISCONTINUITIES IN DNA NASCENT STRANDS OF ULTRAVIOLET IRRADIATED MOUSE CELLS

Abstract Mouse 3T3 cells irradiated with ultraviolet light synthesize DNA containing sites sensitive to the single-strand specific SI nuclease. The appearance of these sites correlates well with the presence of discontinuities in nascent strands, detected by the methodology of sedimentation in alkaline sucrose gradient. Thus, both the sites sensitive to SI nuclease and the discontinuities in nascent strands (i) are stabilized by caffeine; (ii) are no longer formed late after irradiation and (iii) disappear faster when a certain UV fluence is split into two fluences whose sum equals the single fluence. Moreover, the recovery in synthesizing DNA without SI sensitive sites is not dependent on excision repair of pyrimidine dimers or on continuous DNA synthesis. These SI sensitive sites are exclusive of replicative structures of irradiated cells and should correspond to stretches of single-strand DNA (gaps) formed during replication.