Preparation and antimicrobial properties of LL‐37 peptide immobilized lignin/caprolactone polymer film

The use of biopolymers has gained priority in tissue engineering and biotechnology, both as dressing material and for enhancing treatment efficiency. There is a demand for new biopolymers designed with protease inhibitors and antimicrobials. LL‐37 is an important antimicrobial peptide in human skin and exhibits a broad spectrum of antimicrobial activity against bacteria, fungi, and viral pathogens. Using lignin which is an abundant carbohydrate polymer in nature and a polyacrylic acid, we prepared a lignin/caprolactone biodegradable film by plastifying caprolactone and polyacyrlic acid. Lignin/caprolactone biodegradable film was activated with CDI and then immobilized LL‐37 peptide. The structure was elucidated in terms of its functional groups by attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), and the morphology of the lignin/caprolactone biodegradable film was characterized by scanning electron microscopy (SEM) before and after the immobilization process. The amount of LL‐37 immobilized was determined by ELISA method. It was found that 97% of LL‐37 peptide was successfully immobilized onto the lignin/caprolactone biodegradable film. Antimicrobial activity was determined in the lignin/caprolactone biodegradable film samples by quantitative antimicrobial activity method. According to the results, LL‐37 immobilized lignin/caprolactone biodegradable film samples were effective on test organisms; Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli. In bio‐compatibility assays, the ability to support tissue cell integration was detected by using 3 T3 mouse fibroblasts. Samples were examined under transverse microscope, non‐immobilized sample showed a huge cellular death, whereas LL‐37 immobilized lignin/caprolactone biodegradable film had identical cellular growth with the control group. This dual functional lignin/caprolactone biodegradable film with enhanced antibacterial properties and increased tissue cell compatibility may be used to design new materials for various types of biological applications.     

Thermal and neutron shielding properties of 10B containing UV cured hybrid coatings

¹⁰B containing organic–inorganic hybrid coating material based on a UV-curable formulation was prepared via anhydrous sol–gel technique. UV curable coatings were applied on Plexiglas (PMMA) substrates. The molecular structure of the coating material was analyzed by ATR-FTIR spectroscopy technique. The characterization of the UV-curable coating was evaluated by various techniques such as gel content, abrasion resistance, chemical resistance, pencil hardness, pendulum hardness, MEK rubbing test, contact angle, cross-cut test, gloss, transmittance test, neutron absorption, Limiting Oxygen Index and stress–strain tests. Hybrid coatings showed a significant enhancement in radiation shielding properties. The thermal behavior of coatings was also evaluated. It is observed that the thermal stability of coatings mainly depends on their boron and silicate contents. Results of all analysis conducted on hybrid films, and coatings were discussed.     

Preparation of bow tie–type methacrylated poly(caprolactone‐co‐lactic acid) scaffolds: effect of collagen modification on cell growth

A branched methacrylated poly(caprolactone‐co‐lactic acid) and methacrylated poly(tetramethylene ether glycol) (PTMG‐IEM) resins were synthesized. ¹H‐NMR spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR) spectroscopy, and gel permeation chromatography confirmed the chemical structures of copolymers. The photoinitiated polymerization of formulation composed of various amounts of methacrylated poly(caprolactone‐co‐lactic acid), PTMG‐IEM, poly(ethylene glycol) diacrylate, water, and photoinitiator were performed. The curing reactions were followed by photo‐DSC (Differential scanning calorimetry). Gel fraction was calculated from the insoluble part and found as ≥93%. Swelling and contact angles were measured, and all increased with the increasing amount of PTMG‐IEM in network formulations. In vitro degradation studies were performed at 37 °C in phosphate‐buffered saline (pH 7.4). Collagen‐modified polymers were also prepared and introduced as a bioactive moiety to modify the polymer to enhance cell affinity. To compare the cell adhesion affinity to the polymer with and without collagen, cell growth experiments were performed. The results showed that collagen improves the cell adhesion onto the polymer surface. With the increasing amount of collagen, cell viability increases 86% (ECV304, p < 0.05) and 83% (3 T3, p < 0.05). Copyright © 2011 John Wiley & Sons, Ltd.     

环境水样中各形态铬的水解分离-FAAS法分析

研究了痕量铬形态分析的水解分离-原子吸收光谱法。根据Cr2O72-和Cr(Ⅲ)水解特性的不同,将含有Cr(Ⅵ)和Cr(Ⅲ)的试样pH调至6,此时以Cr2O72-形式存在的Cr(Ⅵ)不产生水解沉淀,而Cr(Ⅲ)产生水解沉淀,从而得到Cr(Ⅵ)和Cr(Ⅲ)的分离,对清液中的Cr(Ⅵ)和用酸溶解沉淀所得溶液中的Cr(Ⅲ)进行AAS测定,可求得Cr(Ⅵ)和Cr(Ⅲ),方法的加标回收率分别在98.5%~105%和92.6%~99.2%之间,相对标准偏差分别为1.3%和1.9%,检出限为0.25 mg/L。     

Synthesis and spectral characterization of macrocyclic Schiff base by reaction of 2,6-diaminopyridine and 1,4- bis (2-carboxyaldehydephenoxy)butane and its CuII, NiII, PbII, CoIII and LaIII complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:15,16-tribenzo-9,15-dioxacycloheptadeca-1,5-diene (L) was synthesized by reaction of 2,6-diaminopyridine with 1,4-bis(2-carboxyaldehydephenoxy)butane. Then, its Cu^II, Ni^II, Pb^II, Co^III and La^III complexes were synthesized by the template effect by reaction of 2,6-diaminopyridine and 1,4-bis (2-carboxyaldehydephenoxy)butane and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Co(NO₃)₂ · 6H₂O, La (NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes were characterized by elemental analysis, IR, ¹H- and ¹³C-n.m.r., UV-vis spectra, magnetic susceptibility, thermal gravimetric analysis, conductivity measurements and mass spectra. All complexes are diamagnetic and the Cu^II complex is binuclear. The Co^II complex was oxidised to Co^III.     

Fabrication of photo‐cross‐linked polyethyleneimine‐based barriers for CO2 capture

In this study, first, polyethyleneimine was acrylated and mixed with polyvinyl alcohol solution to prepare photo‐crosslinked polyethyleneimine (PEI)‐based nanofibers by utilizing ultraviolet and electrospinning technique at the same time. For CO₂ permeability testing, same formulations were prepared by using solvent casting technique and exposed to ultraviolet light to have polyethyleneimine‐based membrane films. The chemical structures of the nanofibers were characterized by Fourier transform infrared spectroscopy. The thermal properties of nanofibers were examined by thermal gravimetric analysis and differential scanning calorimeter. The morphology of nanofibers was investigated by scanning electron microscopy. CO₂ permeabilities of samples were also measured. Copyright © 2015 John Wiley & Sons, Ltd.     

Cellulose/cysteine based thiol-ene UV cured adsorbent: removal of silver (I) ions from aqueous solution

Cellulose - In the present study, a novel, eco-friendly, and simple polymeric adsorbent was obtained from cellulose acetate butyrate (CAB) and cysteine (Cys) to remove silver (I) ions in the...     

Removal of Pb2+ and Cd2+ ions from aqueous solutions using guanidine modified hydrogels

In this study, experimental measurements have been made on the batch adsorption of cadmium and lead ions from aqueous solutions using poly(guanidine modified 2‐acrylamido‐2‐methylpropan sulfonic acid/acrylic acid/N‐vinylpyrrolidone/2‐Hydroxyethyl methacrylate), P(AMPSG/AAc/NVP/HEMA) hydrogels. The guanidyl end group bearing AMPSG monomer was synthesized from the reaction of AMPS and guanidine. The hydrogels were prepared by UV‐curing technique. The morphology of the dry H10‐hydrogel sample was examined by SEM. The influence of the uptake conditions, such as pH, functional monomer per cent, contact time, initial feed concentration, and foreign metal ions on the metal ion binding capacity of hydrogel, was also tested. The selectivity of the hydrogel toward the different metal ions tested was Hg(II) > Pb(II) > Au(III) > Cd(II). The adsorption isotherm models were applied to the experimental data, and it was seen that the Langmuir isotherm model was the best fit for the adsorption of Cd(II) and Pb(II) ions on P(AMPSG/AAc/NVP/HEMA) hydrogel. It was found that adsorbed lead and cadmium ions on P(AMPSG/AAc/NVP/HEMA) hydrogel can be effectively desorbed by acid leaching and the regenerated P(AMPSG/AAc/NVP/HEMA) hydrogel can be reused almost five times less without any loss of adsorption capacity. Copyright © 2009 John Wiley & Sons, Ltd.     

Recovery of Au(III) ions by Au(III)-imprinted hydrogel

A new Au(III)-imprinted hydrogel (Au(III)-Imp) was prepared by the photopolymerisation of 4-acryloylmorpholine (AcM), 2-hydroxyethyl acrylate (HEA), and poly(ethylene glycol) diacrylate (cross-linking monomer, PEG-DA) in the presence of gold ions. In addition, non-imprinted hydrogel (N-Imp) was similarly prepared without Au(III) ions The Au(III)-Imp hydrogel was characterised by several techniques. To achieve the optimal conditions, effect of pH, time, and initial metal ion concentrations were investigated using a batch system. The pre-concentration factor for Au(III) ions was found to be at least 100. The analytical parameters of the method were determined and the method was also successfully applied to computer circuit board scrap samples. The reusability of the Au(III)-Imp hydrogel was also determined.     

Thermal conductivity and properties of cyanate Ester/nanodiamond composites

The aim of this study was to improve thermal conductivity, thermal stability, and mechanical properties of bisphenol A dicyanate ester with the addition of nanodiamond. Cyanate ester/nanodiamond composites containing various ratios of nanodiamond were prepared. Thermal stability and thermal conductivity of the samples were evaluated by thermogravimetric analysis, differential scanning calorimetry, and laser flash method, respectively. The samples were characterized with the analysis such as gel content, water absorption capacity, and stress–strain test. Hydrophobicity of the samples was determined by contact angle measurements. Moreover, the surface morphology of the samples was investigated by a scanning electron microscopy. The obtained results prove that the cyanate ester/nanodiamond composites have good thermal and mechanical properties and can be used in many applications such as the electronic devices, materials engineering, and other emergent. Copyright © 2014 John Wiley & Sons, Ltd.