PAMAM Dendrimers as Anchors for the Preparation of Electrocatalytically Active Ultrathin Metallic Films

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine‐terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self‐assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and “dendrichips”; hence, they could find applications in the fields of sensors, fuel cells, and waste‐water treatment.     

Supramolecular porphyrin-fullerene via 'two-point' binding strategy: axial-coordination and cation-crown ether complexation

A highly stable porphyrin-fullerene conjugate with defined distance and orientation, was formed using a newly developed 'two-point' binding strategy involving axial-coordination and cation-crown ether complexation; photochemical studies performed in benzonitrile revealed efficient charge separation and slow charge-recombination in the supramolecular complex.     

Determination of affinity constants and response factors of the noncovalent dimer of gramicidin by electrospray ionization mass spectrometry and mathematical modeling

The dimerization of gramicidin, a 15-residue membrane peptide, in solution can be viewed as a model for protein-protein interactions. We reported previously that the dimer can be observed when electrosprayed from organic solvents and that the abundances of the dimer depends on the dielectric constant of the solvent. Here, we report an effort to determine an affinity constant for the dimerization of gramicidin by using gas-phase abundance. Two issues affecting the determination are the electrospray-induced dissociation of the dimer and discrimination in the electrospray of the dimer compared with the monomer. Other methods developed for the purpose of determining affinity from mass spectral abundance do not address the dissociation of the complex in the gas phase or can not be applied for cases of low affinity constant, K(a). We present a mathematical model that uses the ratio of the signal intensities of the dimer and the monomer during a titration. The model also incorporates the dissociation and an electrospray ionization-response factor of the dimer for extracting the affinity constant for the dimerization of gramicidin. The dimerization constants from the new method agree within a factor of two with values reported in the literature.     

An organocatalytic enantioselective synthesis of (+)-duryne

An efficient enantioselective synthesis of the potent anticancer agent (+)-duryne was achieved by the use of a one-pot organocatalyzed hydroxylation/Ohira–Bestmann and Grubbs cross-metathesis/selective cis-Wittig reaction. This new approach is envisioned to facilitate the synthesis of every representative member of the family.     

Development of Petri Net-Based Dynamic Model for Improved Production of Farnesyl Pyrophosphate by Integrating Mevalonate and Methylerythritol Phosphate Pathways in Yeast

In this case study, we designed a farnesyl pyrophosphate (FPP) biosynthetic network using hybrid functional Petri net with extension (HFPNe) which is derived from traditional Petri net theory and allows easy modeling with graphical approach of various types of entities in the networks together. Our main objective is to improve the production of FPP in yeast, which is further converted to amorphadiene (AD), a precursor of artemisinin (antimalarial drug). Natively, mevalonate (MEV) pathway is present in yeast. Methyl erythritol phosphate pathways (MEP) are present only in higher plant plastids and eubacteria, but not present in yeast. IPP and DAMP are common isomeric intermediate in these two pathways, which immediately yields FPP. By integrating these two pathways in yeast, we augmented the FPP synthesis approximately two folds higher (431.16 U/pt) than in MEV pathway alone (259.91 U/pt) by using HFPNe technique. Further enhanced FPP levels converted to AD by amorphadiene synthase gene yielding 436.5 U/pt of AD which approximately two folds higher compared to the AD (258.5 U/pt) synthesized by MEV pathway exclusively. Simulation and validation processes performed using these models are reliable with identified biological information and data.     

Sensitive and selective spectrophotometric methods for the determination of pheniramine maleate in bulk drug and in its formulations using sodium hypochlorite

Two simple, selective and sensitive spectrophotometric methods are described for the determination of pheniramine maleate (PAM) in pure and dosage forms. The method is based on the reaction of PAM with hypochlorite in the presence of Kolthoff buffer (phosphate-borate) of pH 7.0 to form the chloro derivative of PAM, destruction of the excess hypochlorite by nitrite ion (the chloro derivative of drug is unaffected under the optimized conditions) followed by the oxidation of iodide with the chloro derivative of PAM to iodine (I ₃ ^? which is either measured directly at 355 (method A) or reacted with starch to form a blue chromogen measurable at 590 nm (method B). The optimum conditions that affect the reaction were ascertained, and under these conditions linear relationship was obtained in the concentration ranges of 2–50 and 1–25 μg/mL PAM in methods A and B, respectively. The calculated molar absorptivity values are 7.26 × 10³ and 1.28 × 10⁴ L/(mol cm) for method A and method B, respectively. Sandell’s sensitivity values, limits of detection (LOD) and quantification (LOQ) are calculated as per ICH guidelines. The proposed methods were applied successfully to the determination of PAM in tablets and injection with good accuracy and precision and without interferences from common additives. The results obtained by the proposed methods were compared favourably with those of the reference method. The accuracy and reliability of the proposed methods were further checked by recovery studies via standard addition procedure.     

Elimination of autofluorescence background from fluorescence tissue images by use of time-gated detection and the AzaDiOxaTriAngulenium (ADOTA) fluorophore

Sample autofluorescence (fluorescence of inherent components of tissue and fixative-induced fluorescence) is a significant problem in direct imaging of molecular processes in biological samples. A large variety of naturally occurring fluorescent components in tissue results in broad emission that overlaps the emission of typical fluorescent dyes used for tissue labeling. In addition, autofluorescence is characterized by complex fluorescence intensity decay composed of multiple components whose lifetimes range from sub-nanoseconds to a few nanoseconds. For these reasons, the real fluorescence signal of the probe is difficult to separate from the unwanted autofluorescence. Here we present a method for reducing the autofluorescence problem by utilizing an azadioxatriangulenium (ADOTA) dye with a fluorescence lifetime of approximately 15 ns, much longer than those of most of the components of autofluorescence. A probe with such a long lifetime enables us to use time-gated intensity imaging to separate the signal of the targeting dye from the autofluorescence. We have shown experimentally that by discarding photons detected within the first 20 ns of the excitation pulse, the signal-to-background ratio is improved fivefold. This time-gating eliminates over 96 % of autofluorescence. Analysis using a variable time-gate may enable quantitative determination of the bound probe without the contributions from the background.     

Synthesis,structure and reactivity of a macrocyclic imine: aza-[13]-macrodiolides

The in situ synthesis and subsequent reactions of macrocylic imine 2 are reported. The imine was trapped with cyanotrimethylsilane to give α-amino nitrile aza-[13]-macrodiolides in a 1:1 ratio of diastereomers. A crystal structure of the syn α-cyano nitrile diastereomer, 7a, provided insights into the lack of selectivity in reactions of 2 relative to macrocyclic alkene 1. Reactions to functionalize the syn diastereomer 7a are also reported.     

Nernst effect and diamagnetism in phase fluctuating superconductors

We study superconducting systems in the regime where superconductivity is destroyed by phase fluctuations. We find that the Nernst effect has a much sharper temperature decay than predicted by Gaussian fluctuations, with an onset temperature that tracks Tc rather than the pairing temperature. We find a close quantitative connection with diamagnetism--the ratio of magnetization to transverse thermoelectric conductivity reaches a fixed value at high temperatures. We interpret measurements on underdoped cuprates in terms of a dilute vortex liquid over a wide temperature range above Tc.     

Complexes of a new series of α-diimine macrocycles,I: Template synthesis of cadmium(II) complexes of tetraazamacrocycles derived from 2,3-butanedione or benzil

Summary Cadmium(II) complexes of the type [CdL] (NO₃)₂ (whereL = tetraazamacrocycle with a 12 to 32-membered ring) have been synthesized by the reactions of 2,3-butanedione or benzil with different aliphatic diamines viz. ethylenediamine, 1,3-diaminopropane, 1,4-diaminobutane, 1,6-diaminohexane, 1,8-diaminooctane and 1,12-diaminododecane in the presence of Cd(II) as template. These complexes have been characterized by elemental analyses, conductivity measurements and IR and NMR spectral studies.

---

Komplexe einer neuen Serie von -Diimin-Macrocyclen, 1. Mitt.: Synthese von Cadmium(II)-Komplexen von Tetraazamacrocyclen aus 2,3-Butandion oder Benzil

Zusammenfassung Es wurden Cadmium(II)-Komplexe des Typs [CdL] (NO₃)₂ (wobeiL einen 12-bis 32-gliedrigen Tetraazamacrocyclus darstellt) mittels der Reaktion von 2,3-Butandion oder Benzil mit verschiedenen aliphatischen Diaminen (Ethylendiamin, 1,3-Diaminopropan, 1,4-Diaminobutan, 1,6-Diaminohexan, 1,8-Diaminooctan und 1,12-Diaminododecan) hergestellt. Die Komplexe wurden mittels Elementaranalyse, Leitfähigkeitsmessungen und Infrarot- bzw. Kernresonanzspektroskopie charakterisiert.