A mild deprotection strategy for allyl-protecting groups and its implications in sequence specific dendrimer synthesis

A mild deprotection strategy for allyl ethers under basic conditions in the presence of a palladium catalyst is described. Under these conditions, aryl allyl ethers can be cleaved selectively in the presence of alkyl allyl ethers. These conditions are also effective in the deprotection of allyloxycarbonyl groups. The utility of the current methodology in sequence specific dendrimer synthesis is demonstrated.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Enantioselective Sulfoxidation Catalyzed by a Bisguanidinium Diphosphatobisperoxotungstate Ion Pair

The first enantioselective tungstate‐catalyzed oxidation reaction is presented. High enantioselectivities were achieved for a variety of drug‐like phenyl and heterocyclic sulfides under mild conditions with H₂O₂, a cheap and environmentally friendly oxidant. Synthetic utility was demonstrated through the preparation of (S)‐Lansoprazole, a commercial proton‐pump inhibitor. The active ion‐pair catalyst was identified to be bisguanidinium diphosphatobisperoxotungstate using Raman spectroscopy and computational studies.     

Synthesis of 2-(Triazolyl,Oxadiazolyl, and Pyrazolyl) Substituted 1,5-Benzothiazepin-S,S-Dioxide Derivatives of Potential Medicinal Interest

Abstract

The synthetic potential of 2,3,4,5-tetrahydrobenzo[b] [1,5]thiazepine-1,1,4-trione-2-carbohydrazide (5) which resulted from ethyl-4-oxo-2,3,4,5-tetrahydrobenzo[b] [1,5]thiazepine-2-carboxylate (3), on its oxidation with H₂O₂/AcOH followed by treatment with NH₂NH₂.H₂O, was exploited to provide an access to 2-triazolo, 2-oxadiazolo, and 2-pyrazolo substituted derivatives of 1,5-benzothiazepin-4-oxo-1,1-dioxides (6–10), respectively.     

Metal and Non-metal Based Catalysts for Oxidation of Organic Compounds

The oxidation of organic compounds is of extreme importance in synthetic chemistry. The catalysts provide high selectivity towards the oxidation products employing with the oxidants. This review is not intended to give a complete survey of all oxidation catalysis reactions by different catalysts but rather to give a summary of some important catalytic oxidation reactions by different metal and non-metal based catalysts.     

An efficient synthesis of β-ketoesters via transesterification and its application in Biginelli reaction under solvent-free,catalyst-free conditions

A simple and efficient transesterification process for the synthesis of β-ketoester derivatives has been achieved by the reaction of methyl β-ketoester with higher alcohols at 110 °C under solvent-free, catalyst-free conditions and its application in synthesis of 3,4-dihydropyrimidin-2(1H)-ones C-5 ester derivatives via Biginelli reaction has been described.     

MOLECULAR PACKING IN TRIACYL-sn-GLYCEROLS: INFLUENCES OF ACYL CHAIN LENGTH AND UNSATURATION

The molecular packing in triacylglycerols having different acyl chains has been examined by differential scanning calorimetry, powder X-ray diffraction and vibrational spectroscopy (infrared and Raman) techniques. In the triacylglycerols examined, the acyl chain length, unsaturation or the position of substitution on the glycerol were changed systematically to observe their influence on the molecular packing in different polymorphic forms. Variation in the 3-acyl chain length of 1,2-dipalmitoyl-3-acyl-sn-glycerols (PPX) influenced the molecular packing along the long axis in the stable polymorphic forms. Three different modes of packing were observed. If X ≤ 4, the compounds packed in a bilayer structure similar to diacylglycerols, or if X ≥ 10 and ≤ 16 the compounds packed in a bilayer structure but similar to mono acid triacylglycerols. However for intermediate 3-acyl chain lengths, as in PP6 and PP8 the stable packing can occured only through chain segregation resulting in a trilayer structure. In the triacylglycerols containing unsaturated acyl chains, 1,2-dioleoyl-3-acyl-sn-glycerols (00X) and 1,3-dioleoyl-Z-acyl-sn-glycerols (0X0) the stable polymorphic forms packed in a trilayer structure where the odd acyl chains segregated and formed a middle layer. In a metastable hexagonal packing (α-phase) the long range ordering is minimal. Because of this lack of specific chain-chain interaction the 3-short acyl chain compounds of PPX packed in a unimolecular length structure (except PP2) whereas the 3-long acyl chain compounds packed in a bilayer structure. In orthorhombic perpendicular and triclinic parallel packing where the specific chain-chain interaction is increased, the end plane methyl packing and the glycerol conformation played important roles in the formation of bi-, tri- and hexalayer structures. The driving force in the formation of these different structures is to minimize the crystal defects created by the odd acyl chains and to enhance the specific chain-chain interactions. The presence of an odd acyl chain influenced the lateral chain packing as well, e.g., the stability of the orthorhombic perpendicular packing is enhanced by the presence of an odd acyl chain and even in some cases it is favored over the triclinic parallel packing. The odd acyl chain at the 1- or 3position of -sn-glycerol stabilized the orthorhombic perpendicular packing. This indicates the glycerol conformation is probably perpendicular to the layer plane and thus is different from the monoacid triacylglycerols.     

Greener approach toward synthesis of biologically active s-Triazine (TCT) derivatives: A recent update

The greener methodology to synthesize s-triazine derivatives (also known as TCT) is described, including synthesis through microwave, ultrasound, and solvent-free conditions. This review mainly focuses on reactions of TCT (2,4,6-trichloro-1,3,5-triazine) with various substituents having amine and hydroxy functionalities to give corresponding triazine derivatives under a greener approach. The results of reactions indicate that, unlike classical methods, green methods result in better yields of the product, through a rapid reaction, under mild reaction conditions, and by easy workup procedures.     

Efficient eco-friendly syntheses of dithiocarbazates and thiosemicarbazones

ABSTRACT

Eight Schiff bases have been synthesized by conventional and three different eco-friendly methods, whereby two aromatic carbonyl compounds viz. 2-thiophenecarboxaldehyde and salicylaldehyde were reacted with S-methyl, S-benzyl, and S-n-octyl-dithiocarbazates and thiosemicarbazide. In order to evaluate the efficiency of the synthesis methods, the time to complete the reaction and the yield of the Schiff base synthezised by eco-friendly methods, such as solvent-free grinding, water as a solvent, and lemon juice as catalyst, were compared with those synthesized by the conventional method. The chemical structures of all the synthesized Schiff bases, where two of them are novel and reported for the first time, were fully characterized by a variety of physico-chemical, analytical, and spectroscopic techniques. The molecular and crystal structures of the Schiff bases especially those having 2-thiophene moiety were further elucidated by single crystal X-ray diffraction analyzes.     

Fluid Flow Analysis of Integrated Porous Bone Scaffold and Cancellous Bone at Different Skeletal Sites: In Silico Study

The dynamic characteristic of bone is its ability to remodel itself through mechanobiological responses. Bone regeneration is triggered by mechanical cues from physiological activities that generate structural strain and cause bone marrow movement. This phenomenon is crucial for bone scaffold when implanted in the cancellous bone as host tissue. Often, the fluid movement of bone scaffold and cancellous bone is studied separately, which does not represent the actual environment once implanted. In the present study, the fluid flow analysis properties of bone scaffold integrated into the cancellous bone at different skeletal sites are investigated. Three types of porous bone scaffolds categorized based on pore size configurations: 1 mm, 0.8 mm and hybrid (0.8 mm interlaced with 0.5 mm) were used. Three different skeletal sites of femoral bone were selected: neck, lateral condyle and medial condyle. Computational fluid dynamics was utilized to analyze the fluid flow properties of bone scaffold integrated cancellous bone. The results of this study reveal that the localization and maximum value of shear stress in an independent bone scaffold are significantly different compared to the bone scaffold integrated with cancellous bone by about 160% to 448% percentage difference. Low shear stress and high permeability were found across models that have higher Tb.Sp (trabecular separation). Specimen C and femoral lateral condyle showed the highest permeability in their respective category.