One cannot hear orbifold isotropy type

We show that the isotropy types of the singularities of Riemannian orbifolds are not determined by the Laplace spectrum. Indeed, we construct arbitrarily large families of mutually isospectral orbifolds with different isotropy types. Finally, we show that the corresponding singular strata of two isospectral orbifolds may not be homeomorphic. Received: 6 October 2005     

Elution order in gas chromatography

The retention behavior of a heterogeneous group of solutes has been examined on seven different stationary phases under isothermal and temperature-programmed conditions. Both ΔH_v (enthalpy of solute vaporization from the stationary phase) and ΔS_v (entropy of solute vaporization from the stationary phase) values were determined for each solute – stationary phase combination under isothermal conditions. Both program rate and carrier gas velocity were shown to affect solute elution order. Unless these and other experimental factors discussed are controlled, column equivalency studies based on solute elution order have dubious value.     

Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

Investigation of a UV-laser generated waveguide in a planar polymer chip using an improved interferometric method

Polymeric integrated-optical waveguides are prepared in a planar polymer chip by UV-laser lithographic methods. The waveguide samples are irradiated by an excimer laser at a wavelength Λ=248 nm with various irradiation parameters (different fluencies and irradiation doses). Mach-Zehnder interferometer is employed and the refractive index depth profiles of the waveguide samples are obtained. This profile covers two regions having exponential and Gaussian shapes. The model field distributions strongly depend on the refractive index of each region. The mode field distribution and the effective mode indices for each region have been calculated on the basis of a theoretical model and the experimentally measured data.     

Evaluation of yarn defects by image processing technique

Yarn defect evaluation, since they can drastically deteriorate the quality of the product, is one of the most important problems in textile industry. In this work, the yarn defects are evaluated by image processing technique. Initially, images were taken by scanner, later the obtained images were modified by using several filters. Then, the yarn defects were identified base on their geometric shape and surface area. As the results show, image processing methods is excellently reliable in evaluating number and type of yarn defects.     

An Efficient,One-Pot Synthesis of Dialkyl 5-Hydroxy-4-aryl-2,5-dihydrofuran-2,3-dicarboxylate Derivatives

The reaction between arylglyoxalmonohydrates, dialkyl acetylenedicarboxylates, and triphenylphosphine is described as a simple and efficient method for the synthesis of 5-hydroxy-4-aryl-2,5-dihydrofuran-2,3-dicarboxylate derivatives.     

Total Stereospecific Synthesis of (3E,7Z)-Tetradecadienyl Acetate,the Major Sex Pheromone Component of the Potato Pest Symmetrischema tangolias

Chemistry of Natural Compounds - (3E,7Z)-Tetradecadienyl acetate, the major sex pheromone component of the potato pest Symmetrischema tangolias (Gyen), was stereoselectively synthesized from the...     

Pressure Improvement on a Supercritical High-Lift Wing Using Simple and Modulated Pulse Jet Vortex Generator

In this paper, an experimental study, aimed at delaying flow separation on a high-lift device using a pulsed blowing excitation method, is reported. The main objective of this investigation was to evaluate a new pulsed jet generation strategy to enhance flow control performance. In these experiments, two types of signal waveform were implemented to produce the unsteady blowing; a simple square-wave excitation signal for the first case, and a burst modulated excitation signal for the second case. The signal modulation was the first time to be used for a fast-switching solenoid valve actuator. Another objective of this study was to evaluate a new arrangement of the jet exit slots, in the form of a vortex generator which was employed for the first time on the high-lift device. For this purpose, a NASA SC(2)-0714 airfoil with a single slotted flap was employed. The vortex generator jets emanated from the shoulder of the trailing-edge flap with excitation frequencies from 40 to 1000 Hz. Pressure distribution around the model and wake total pressure deficit were measured. The results indicated that ejection from vortex generator slot pairs was able to prevent flow separation completely in most conditions. These measurements revealed that the burst modulated excitation signal was accompanied by more aerodynamic improvements and less air consumption relative to the simple pulsed jet excitation signal. In the best flow control mode, the results showed about a 53% increase in the value of the suction pressure peak on the flap and a 38% decrease in drag with a reduction in total pressure loss.

     

Ferroptosis: A New Road towards Cancer Management

Ferroptosis is a recently described programmed cell death mechanism that is characterized by the buildup of iron (Fe)-dependent lipid peroxides in cells and is morphologically, biochemically, and genetically distinct from other forms of cell death, having emerged to play an important role in cancer biology. Ferroptosis has significant importance during cancer treatment because of the combination of factors, including suppression of the glutathione peroxidase 4 (Gpx4), cysteine deficiency, and arachidonoyl (AA) peroxidation, which cause cells to undergo ferroptosis. However, the physiological significance of ferroptosis throughout development is still not fully understood. This current review is focused on the factors and molecular mechanisms with the diagrammatic illustrations of ferroptosis that have a role in the initiation and sensitivity of ferroptosis in various malignancies. This knowledge will open a new road for research in oncology and cancer management.