Determination in plasma of angiotensin-converting enzyme inhibitor by inhibitor-binding assay.

A method of determining a new angiotensin-converting enzyme inhibitor (CS-622) and its active metabolite (RS-5139) in plasma by inhibitor-binding assay has been developed using high-performance liquid chromatography. The assay is based on the principle that the amount of inhibitor bound to the enzyme is inversely related to the amount of hippuric acid liberated on hydrolysis from the artificial substrate (hippuryl-L-histidyl-L-leucine). Plasma was heated at 60 degrees C for 15 min, to inactivate endogenous enzyme, and preincubated with rabbit-lung angiotensin-converting enzyme at 37 degrees C for 3 min. The artificial substrate (5.75 mg/ml in pH 8.3 phosphate buffer containing sodium chloride) was added to the resulting solution, and the mixture was incubated for 30 min. The reaction was terminated by the addition of 2 M hydrochloric acid. The hippuric acid liberated on hydrolysis was extracted with ethyl acetate and determined by reversed-phase chromatography using methylparaben as an internal standard. The total concentration of the inhibitor and its metabolite were determined by this method after de-esterification by rat-plasma esterase. The standard curve was obtained by the regression analysis of log concentration against logit response. The within-day and day-to-day precision were satisfactory. The proposed method is simple, rapid and sensitive enough to determine angiotensin-converting enzyme inhibitor in plasma.     

New Chiral Kemp's Acid Diamides for Chiral Amine Recognition by 1 H NMR

Two Kemp's acid diamides were synthesized and applied to chiral amine recognition using ¹H NMR analysis. One derivative based on 1-(1-naphthyl)ethylamine had good chiral recognition of six amines and was useful to determine the optical purity for three amines, i.e., methylbenzylamine, 1-(1-naphthyl)ethylamine and 1- henylpropylamine,however, the cyclohexylethylamine derivative showed little discrimination for the amines studied. Together with the results for alkylamines, it was shown that aromatic structure was important for aromatic shielding anisotropy and –– interactions between host and guest. The structure of the 1-(1-naphthyl)ethylamine derivative in solution was also considered based on ¹H NMR data and computer simulation.     

Thermosensitive biodegradable polydepsipeptide

A poly(N-isopropylacrylamide) (PNIPAAm)-like biodegradable thermosensitive polydepsipeptide, poly[Glc-Asn(N-isopropyl)], was synthesized by introducing an isopropyl amide group into poly[Glc-Asn]. Poly[Glc-Asn(N-isopropyl)] was degraded in vitro by cleavage of the ester bonds in the main chain in water at room temperature. The non-toxic nature of the polymer and its degradation products, coupled with a cloud point at 29 degrees C in water, make this polymer attractive for biomedical implant applications.     

Application of non-thermal atmospheric pressure ac plasmas to the carbon dioxide reforming of methane

Methane conversions of 11.9%, yields of hydrogen as high as 23.3% and energy yields of 1.0 mol H₂/kWh have been achieved from CO₂ reforming of CH₄ in non-thermal, atmospheric pressure plasma reactors with Pt coated electrodes. Two reactors have been studied. A novel fan type reactor consisting of a movable rotor and immobile stator produced the highest yields in contrast to a tube type (silent discharge) reactor with a glass dielectric barrier. Conversions, yields of hydrogen and energy yields (expressed as mol H₂/kWh) were studied for CO₂/CH₄ concentrations of 1.1% and 5.0% in He as a function of flow rate and input voltage. Hydrogen yields are observed to increase as the input voltage is increased from 411 V to 911 V and the flow rate is decreased from 100 cc/min to 30 cc/min. Energy yields vary only slightly with input voltage and flow rate. Hydrogen yields show little dependence on CO₂/CH₄ concentrations, but energy yields are approximately five times greater for the 5.0% mixture than the 1.1% mixture. Selectivities to H₂, CO, coke, and low molecular weight hydrocarbons were also evaluated and compared to data obtained without CO₂ in the feed. Hydrogen selectivities of nearly 100% were obtained, with small amounts of ethane and propane as the only observed side products and the selectivites were approximately the same whether CO₂ was present or absent in the mixture. However, the reaction proceeds much more cleanly when CO₂ is present, producing CO. The syngas product has an H₂ : CO ratio of 1.5 with the fan type reactor and 0.67 with the tubular reactor. In the absence of CO₂, coke is the main carbonaceous product. Under all conditions studied the fan type reactor demonstrated higher methane conversions (up to 11.9%) and selectivities to hydrogen.     

High performance liquid chromatography with an electrochemical detector in the cathodic mode as a tool for the determination of p-nitrophenol and assay of acid phosphatase in urine samples

Utilizing a commercially available helium-purging device and PEEK tubes for all tubing, especially for connection between the mobile phase and pump, high performance liquid chromatography with an electrochemical detector (ECD/HPLC) at the cathodic mode is a simple and precise method for the determination of p-nitrophenol (NP). Studies with cyclic and hydrodynamic voltammetry indicated that 25% aqueous MeOH containing 0.1% (v/v) CF(3)CO(2)H and -0.8 V vs. Ag/AgCl are the best mobile phase and detection potential for cathodic ECD/HPLC. With the present system, the limits of detection and determination were 0.2 and 0.25 microM, respectively, and up to 50 microM, a linear calibration curve was afforded. Within-day precisions for the analysis of 5 and 50 microM NP were 0.8 and 0.7% (n=6), respectively, and between-day precisions (n=6) for these samples were 3.5 and 2.2%, respectively. Compared with the commonly used Bessey-Lowry-Brock method, cathodic ECD/HPLC was useful for the assay of acid phosphatase in urine samples with p-nitrophenyl phosphate disodium salt as a substrate.     

Studies on pyrazines. 29 . High regioselective synthesis of chloropyrazines from 3-substituted pyrazine 1-oxides

Reaction of 3-methoxy- or 3-chloropyrazine 1-oxides with refluxing phosphoryl chloride in the presence of amine led to a high regioselective formation of 3-substituted 2-chloropyrazines. In contrast, the use of chloroacetyl chloride instead of phosphoryl chloride enabled different regioselectivity to yield 6-substituted 2-chloropyrazines, particularly 3-methoxycarbonylpyrazine 1-oxide was almost exclusively converted into methyl 6-chloropyrazinecarboxylate under the conditions without the amine.     

Synthesis and structure of 16 pi octaalkyltetraphenylporphyrins

The oxidized octaethyltetraphenylporphyrin (1, OETPP) and the corresponding newly prepared octaisobutyltetraphenylporphyrin (3, OisoBuTPP) could be isolated from the reaction of OETPPLi2 (or OisoBuTPPLi2) with SOCl2. The X-ray analysis and the characteristic UV-vis spectra of 1 and 3 revealed that these are the first examples of 16 pi nonaromatic porphyrins.     

Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.