Intercepting Wacker intermediates with arenes: C-H functionalization and dearomatization

An intramolecular cyclization cascade reaction has been developed utilizing a high valent palladium intermediate that generates a carbon-carbon and carbon-oxygen bond in a single transformation. This method provides rapid access to highly functionalized tricyclic scaffolds, including spirocyclic cyclohexadienones. Good yields and mild conditions are reported with high tolerance toward oxygen and water.     

Cyclic Disulfide Liposomes for Membrane Functionalization and Cellular Delivery

Liposomes are effective therapeutic delivery nanocarriers due to their ability to encapsulate and enhance the pharmacokinetic properties of a wide range of therapeutics. Two primary areas in which improvement is needed for liposomal drug delivery is to enhance the ability to infiltrate cells and to facilitate derivatization of the liposome surface. Herein, we report a liposome platform incorporating a cyclic disulfide lipid (CDL) for the dual purpose of enhancing cell entry and functionalizing the liposome membrane through thiol-disulfide exchange. In order to accomplish this, CDL-1 and CDL-2 , composed of lipoic acid (LA) or asparagusic acid (AA) appended to a lipid scaffold, were designed and synthesized. A fluorescence-based microplate immobilization assay was implemented to show that these compounds enable convenient membrane decoration through reaction with thiol-functionalized small molecules. Additionally, fluorescence microscopy experiments indicated dramatic enhancements in cellular delivery when CDLs were incorporated within liposomes. These results demonstrate that multifunctional CDLs serve as an exciting liposome system for surface decoration and enhanced cellular delivery.     

Reactive Oxygen Species (ROS) Activated Liposomal Cell Delivery using a Boronate-Caged Guanidine Lipid

We report boronate-caged guanidine-lipid 1 that activates liposomes for cellular delivery only upon uncaging of this compound by reactive oxygen species (ROS) to produce cationic lipid products. These liposomes are designed to mimic the exceptional cell delivery properties of cell-penetrating peptides (CPPs), while the inclusion of the boronate cage is designed to enhance selectivity such that cell entry will only be activated in the presence of ROS. Boronate uncaging by hydrogen peroxide was verified by mass spectrometry and zeta potential (ZP) measurements. A microplate-based fluorescence assay was developed to study the ROS-mediated vesicle interactions between 1 -liposomes and anionic membranes, which were further elucidated via dynamic light scattering (DLS) analysis. Cellular delivery studies utilizing fluorescence microscopy demonstrated significant enhancements in cellular delivery only when 1 -liposomes were incubated with hydrogen peroxide. Our results showcase that lipid 1 exhibits strong potential as an ROS-responsive liposomal platform for targeted drug delivery applications.     

Mechanism of reversible alkyne coupling at zirconocene: ancillary ligand effects

The mechanism of reversible alkyne coupling at zirconium was investigated by examination of the kinetics of zirconacyclopentadiene cleavage to produce free alkynes. The zirconacyclopentadiene rings studied possess trimethylsilyl substituents in the alpha-positions, and the ancillary Cp2, Me2C(eta(5)-C5H4)2, and CpCp* (Cp* = eta(5)-C5Me5) bis(cyclopentadienyl) ligand sets were employed. Fragmentation of the zirconacyclopentadiene ring in Cp2Zr[2,5-(Me3Si)2-3,4-Ph2C4] with PMe3, to produce Cp2Zr(eta(2)-PhC[triple bond]CSiMe3)(PMe3) and free PhC[triple bond]CSiMe3, is first-order in initial zirconacycle concentration and zero-order in incoming phosphine (k(obs) = 1.4(2) x 10(-5) s(-1) at 22 degrees C), and the activation parameters determined by an Eyring analysis (DeltaH(double dagger) = 28(2) kcal mol(-1) and DeltaS(double dagger) = 14(4) eu) are consistent with a dissociative mechanism. The analogous reaction of the ansa-bridged complex Me2C(eta(5)-C5H4)2Zr[2,5-(Me3Si)2-3,4-Ph2C4] is 100 times faster than that for the corresponding Cp2 complex, while the corresponding CpCp* complex reacts 20 times slower than the Cp2 derivative. These rates appear to be largely influenced by the steric properties of the ancillary ligands.     

9,10-Dichlorooctafluoroanthracene as a building block for n-type organic semiconductors

9,10-Dichlorooctafluoroanthracene (1) was synthesized from commercially available tetrafluorophthalic acid by an optimized solution-phase route. To establish 1 as a synthon for n-type organic semiconductors, the compound was reacted with phenylboronic acid under modified Suzuki-Miyaura coupling conditions to generate octafluoro-9,10-diphenylanthracene (7) in high yield. Cyclic voltammetry and X-ray crystallography indicate that 7 has a stabilized LUMO energy level and exhibits extended pi stacking, which should lead to efficient electron transport in solid-state devices. 1,2,3,4,5,6,7,8-Octafluoroanthracene (2) was also synthesized as a potential n-type building block, but suitable C-C coupling conditions for this compound were not found, and 2 could not be converted into 9,10-dibromooctafluoroanthracene or octafluoro-9,10-diiodoanthracene.     

High precision delta(17)O isotope measurements of oxygen from silicates and other oxides: method and applications

The use of infrared laser-assisted fluorination to release oxygen from milligram quantities of silicates or other oxide mineral grains is a well-established technique. However, relatively few studies have reported the optimisation of this procedure for oxygen-17 isotope measurements. We describe here details of an analytical system using infrared (10 μm) laser-assisted fluorination, in conjunction with a dual inlet mass spectrometer of high resolving power ( approximately 250) to provide (17)O and (18)O oxygen isotope measurements from 0.5-2 mg of silicates or other oxide mineral grains. Respective precisions (1) of typically 0.08 and 0.04 per thousand are obtained for the complete analytical procedure. Departures from the mass-dependent oxygen isotope fractionation line are quantified by Delta(17)O; our precision (1) of such measurements on individual samples is shown to be +/-0.024 per thousand. In turn, this permits the offset between parallel, mass-dependent fractionation lines to be characterised to substantially greater precision than has been possible hitherto. Application of this system to investigate the (17)O versus (18)O relationship for numerous terrestrial whole-rock and mineral samples, of diverse geological origins and age, indicates that the complete data set may be described by a single, mass-dependent fractionation line of slope 0.5244+/- 0.00038 (standard error). Copyright 1999 John Wiley & Sons, Ltd.     

Stability of lipid films formed on gamma-aminopropyl monolayers

The stability of supported lipid membranes (SLMs) deposited on planar substrates derivatized with (gamma-aminopropyl)silane (GAPS) was examined. Ellipsometry, fluorescence microscopy, and atomic force microscopy were used to characterize SLMs exposed to repeated drying and rehydration. Vesicle fusion on GAPS-coated substrates produced SLMs with a thickness significantly greater than that of a single lipid bilayer. Exposure to even one cycle of drying/rehydration significantly decreased the thickness of a SLM on GAPS, and repeated drying/rehydration resulted in near quantitative lipid desorption. Thus SLMs on GAPS do not appear to be significantly more stable than the single bilayer SLM that is formed on bare glass or SiO2 under equivalent conditions.     

Structures of aza-macrocyclic ligands with polyphosphonated dangling groups

Two phosphonated hexaaza-macrocycles with 24- and 26-membered rings have been synthesized via a Mannich reaction and characterized. The novel crystal structures of the macrocyclic ligands show the extended 3-D hydrogen bonded structure in their solid states. These ligands have unusual ring conformations with two or four pendent arms wrapping around the macrocycle with alternating up and down orders. Strong hydrogen bonding between the protonated phosphonate groups and the deprotonated phosphonated groups was observed in those structures together with the complicated solvent hydrogen bonding networks.     

泥沙输运模拟综述——现状及其发展趋势

随着流体力学中数值方法的飞速发展,计算模型已经成为研究流体运动,泥沙输运和不同环境(诸如河流,湖泊及沿海地区)中相应污染物归趋过程等方面非常有吸引力的工具,在过去的30多年里,发展了许多计算水动力学/泥沙输运模型.文章追溯当前具有代表性的(一维、二维、三维)模型的发展历程,描述他们各自的特点,优势及局限,力图作为对模型方面感兴趣读者的第一指南,同时也为大家讨论模型的局限性,未来的发展趋势和研究需求方面搭建一个平台.给出了模型的表达,时空特性,水动力学和沉积物的耦合方式,处理非恒定流,推移质和悬移质,泥沙交换过程,泥沙类型(粘性或非粘性)及非均匀泥沙输运的能力.总结了不同模型的应用实例,读者可以运用这些例子作为研究模型设置,模型率定及模型验证的参考.给出了选择泥沙输运模型应遵循的原则,模型输入及率定方面存在的问题及改进的途径.探讨了现有水动力学/泥沙输运模型在处理复杂湍流,泥沙携带,流动与输沙耦合,非均匀泥沙,离散和扩散系数,河岸来沙处理等方面的局限性及改进的方向.最后,对基于多相流思想的泥沙输运模型及其它一些交叉性问题作了评述与展望.     

9,10-Disubstituted octafluoroanthracene derivatives via palladium-catalyzed cross-coupling

9,10-Dichlorooctafluoroanthracene (1) reacts with aryl boronic acids and terminal alkynes under palladium-catalyzed cross-coupling conditions to afford 9,10-diaryloctafluoroanthracenes (2a-e) and 9,10-dialkynyloctafluoroanthracenes (6a,b), respectively. Optical spectroscopy and cyclic voltammetry indicate that octafluoro-9,10-di(thiophen-2-yl)anthracene (2d) exhibits donor-acceptor character and a LUMO energy level of -3.27 eV relative to vacuum. A functionalized 5-bromothiophen-2-yl derivative (2e) was obtained in high yield by bromination of 2d with NBS. X-ray crystallographic analysis of octafluoro-9,10-bis[(trimethylsilyl)ethynyl]anthracene (6a) reveals a solid-state structure that mimics the packing of columnar liquid crystals, with a pi stacking distance of 3.39 A between the octafluoroanthracene cores. In addition, octafluoro-9,10-bis(mesitylethynyl)anthracene (6b) displays a LUMO energy level of -3.50 eV, which approaches the value of -3.65 eV measured for perfluoropentacene, making 9,10-dialkynyloctafluoroanthracenes a promising new class of n-type organic materials.