Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Synthesis and absolute configuration of cordiaquinone K, antifungal and larvicidal meroterpenoid isolated from the Panamanian plant, Cordia curassavica

Total synthesis of cordiaquinone K, a new antifungal and larvicidal meroterpenoid, is reported. The absolute configuration of cordiaquinone K was confirmed by the synthesis.     

Fluorometric Determination of Trace Amounts of Fluoride Ion Using an Expanded Porphyrin

A highly selective and sensitive method of fluorometry is described for determination of the fluoride ion at the parts per billion level via the ion-pair complex formation of the fluoride ion with an expanded prophyrin [2,23-diethyl-8,17-bis(2-ethoxycarbonylethyl)-3,7,12,13,18,22-hexamethylsapphyrin (H₃sap)]. The ion-pair complex gives out an enhanced fluorescence intensity at 680 nm on excitation at 450 nm. Since the present method is based on a direct reaction of the fluoride ion with the sappyrin, a 200-fold amount of the aluminum (III) ion [10⁻⁴M (M = mol dm⁻³)] and a 2000-fold amount of the iron(III) ion (10⁻³M) over the fluoride ion did not interfere with determination of the fluoride ion at concentrations as low as 5 × 10⁻⁷M in the presence of 1,2-diaminocyclohexane-N,N,N′,N′-teraacetic acid. The proposed method was applied to determination of the fluoride ion in various water samples (tap water, river water, rain water, underground water, and hot spring water) and satisfactory results were obtained.     

Condensed thienopyrimidines. II. Synthesis and gastric antisecretory activity of thiazole and polymethylene condensed thienopyrimidine derivatives

Thiazolo[3,2-a]thieno[3,2-d]-, [3,4-d]- and [2,3-d]pyrimidin-5-one derivatives (6, 11 and 16), and polymethylene condensed thieno[3,2-d]-, [3,4-d]- and [2,3-d]pyrimidin-5-one derivatives (19-21), in which the oxygen atom of the oxazolidine moiety in 3 was replaced by a sulfur atom or methylene groups, were synthesized and evaluated for gastric antisecretory activity in pylorus-ligated rats. The structure-activity relationships of these compounds are discussed.     

Chiral ligand-controlled asymmetric conjugate addition of lithium amides to enoates

The external chiral ligand-controlled asymmetric conjugate addition reaction of lithium amides with alpha,beta-unsaturated esters provided beta-amino esters in high yields and high enantioselectivities.     

Radiation-induced copolymerizations of perfluorovinyl acetic acid and its methyl ester with α-olefin

Homopolymerizations and copolymerizations of perfluorovinyl acetic acid (FVA) and its methyl ester (MFVA) were carried out by γ radiation at a temperature of 25°C, a dose rate of 1 × 10⁶ rad/hr, and FVA/α-olefin and MFVA/α-olefin ratios of 10/90-90/10 in the monomer mixture. FVA and MFVA gave small quantities of brown and greasy low-molecular-weight homopolymers. The polymerization rates of both FVA and MFVA were extremely small, as shown by the maximum G value of monomer consumption of 12. FVA and MFVA reacted with α-olefin to form waxlike copolymers. The copolymerization rates of both FVA and MFVA with α-olefin were remarkably larger than those of the homopolymerizations, particularly with ethylene. The polymer compositions of FVA/ethylene or MFVA/ethylene was nearly 1/2 over a wide range of the monomer compositions. The Mayo–Lewis method gave negative r₁ (FVA) and r₁ (MFVA). The polymer composition curves could be well interpreted by introducing the penultimate model.     

Chiral ligand-controlled asymmetric conjugate addition of alpha-trimethylsilanylacetate to acyclic and cyclic enones

The reaction of lithium ester enolate with enones provides a challenge for chemoselectivity, that is, discrimination between a conjugate addition and a 1,2-addition. Asymmetric conjugate addition of a lithium enolate of alpha-trimethylsilanylacetate to acyclic and cyclic alpha,beta-unsaturated ketones was mediated by an external chiral ligand to give the corresponding 1,4-adducts in good enantioselectivity of 74% and good chemoselectivity.     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

Improving the properties of the proton exchange membranes by introducing α-methylstyrene in the pre-irradiation induced graft polymerization

New proton exchange membranes (PEMs) were prepared by pre-irradiation induced grafting of α-methylstyrene (AMS)/styrene (STY)/divinylbenzene (DVB) into the crosslinked polytetrafluoroethylene (RX-PTFE) films and successively sulfonated. The new PEMs showed the improved glass transition temperature and chemical stability as compared with the PEMs prepared by pre-irradiation induced grafting of STY/DVB. The balance of the cost, grafting kinetic, thermal properties and the properties of the resulted proton exchange membrane is the key point of this work.     

Potential acting on the trapped electron

If the absorption of a trapped electron can be shown to correspond to bound—free transitions, it should be possible to calculate the potential acting on the trapped electron inversely from its absorption spectrum. In this paper we present the method of calculating the potential acting on a trapped electron from the observed absorption spectrum.