Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Headspace single-drop microextration for the detection of organotin compounds

The performance of single-drop microextraction (SDME), coupled with gas chromatography/mass spectrometry, was assessed for the determination of tributyltin compounds in water and solid samples. Experimental parameters impacting the performance of SDME, such as microextraction solvent and sampling and stirring time, were investigated. Analytical results obtained by SDME were compared with those generated by conventional solid phase microextraction (SPME) and liquid-liquid extraction (LLE) for the determination of TBT in PACS-2 sediment certified reference material (CRM).     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

TOF-SIMS and XPS-investigations of ion implanted single crystal 1b-diamonds

Near surface zones of (48)Ti- and (52)Cr-implanted single crystal diamonds (1b-MCD) were characterized by XPS, TOF-SIMS and white light interference microscopy (WLI). By the combination of WLI and TOF-SIMS it was possible to calibrate the depth scale of TOF-SIMS and XPS depth profiles quantitatively. The adjustment of TOF-SIMS and XPS elemental depth profiles in the implantation maximum increases the quantitative detection limit of the implanted elements by more than two orders of magnitude and enables the interpretation of results from wear simulation experiments. Peak fits of XPS C(1s)-photolines indicate the fraction and chemical nature of carbide-like structures in the implantation zone. Qualitative hints on carbide compounds are possibly included in the reconstructed TOF-SIMS spectra but this information can presently only be extracted with the aid of XPS analyses.     

Nitrido-Sodalithe. II. Synthese,Struktur und Eigenschaften von M(6+(y/2)–x)H2x[P12N24]Zy mit M = Fe,Co, Ni,Mn; Z = Cl,Br, I; 0 ≤ x ≤ 4; y ≤ 2

Nitrido-Sodalites. II. Synthesis, Crystal Structure, and Properties of M_{(6+(y/2)–x)}H_2x[P₁₂N₂₄]Z_y with M = Fe, Co, Ni, Mn; Z = Cl, Br, I; 0 ≤ x ≤ 4; y ≤ 2 The nitrido sodalites M_{(6+(y/2)–x)}H_2x[P₁₂N₂₄]Z_y with M = Fe, Co, Ni, Mn; Z = Cl, Br, I; 0 ≤ x ≤ 4; y ≤ 2 are obtained by the reaction of HPN₂ or [PN(NH₂)₂]₃ with the metal halogenide MZ₂ (T = 700°C). The compounds are isotypic to Zn_(7–x)H_2x[P₁₂N₂₄]Cl₂. An increase of the ionic radii of the cations or anions results in an expansion of the lattice which is caused by an increase of the P? N? P angle. The influence of the cation is more dominant than that of the anion. By reacting [PN(NH₂)₂]₃ with metal halogenide (MZ₂) hydrogen free, X-ray amorphous products are obtained. The formation of the chloride-containing P? N-sodalite in this reaction begins at temperatures below 450°C.     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.     

Synthesis,reactions and catalytic activity of some mixed trifluorophosphine(triphenylphosphine)hydrido complexes of cobalt(I)

The complexes CoH(PF₃)_4?n (PPh₃)_n (n = 1–3) have been prepared by low from the reaction between CoH(PF₃)(PPh₃)₃ and butadiene. The hydrido complexes are active catalysts for the isomerisation of 1-octene to 2-octene under hydrogen or nitrogen.     

Neutral pi-associated porphyrin [2]catenanes

A series of neutral porphyrin-containing catenanes has been synthesised, consisting of a zinc porphyrin strapped by a polyethylene glycol chain containing four or six ethylenoxy-units and incorporating a central naphthoquinol unit, interlinked with a naphthalene diimide macrocycle. The napthalene diimide precursor units exhibit only weak binding with the strapped porphyrins (Ka between 8 and 0.02 M(-1)), but good yields of the catenanes were obtained by Glaser coupling of the alkynyl napthalene diimide precursors in the presence of the porphyrins. Structures and solution conformations were determined by mass spectral and detailed 1H NMR studies. For the longer strapped porphyrins, the diimide macrocycle rotates around the central naphthoquinol unit at 420-450 times per second, while rotation is virtually prevented in the tighter strapped derivatives. A second dynamic process occurring in both sets of catenanes and described as 'yawing' leads to inequivalence in the naphthalene moieties. UV-Visible spectra indicate charge transfer interactions and electronic communication between the two components of the catenane.     

Bestimmung der molaren Masse und der Ladungszahl von Polymerelektrolyten mit der Ultrazentrifuge

Zusammenfassung In der vorliegenden Arbeit wird das Sedimentationsgleichgewicht der Systeme Na₆[H₂W₁₂O₄₀]—NaCI—H₂O und Na₆[H₂W₁₂O₄₀]—NaClO₄— H2O untersucht. Die scheinbare molare Masse Mapp des Natriummetawolframats wird in beiden Systemen als Funktion der Natriummetawolfrarnat-Anfangspartialdichte ₀ ^PX _z gemessen. Durch lineare Extrapolation der Funktion Mapp = Mapp (PP,, ) auf die Polymerelektrolyt-Anfangspartialdichte Null können die Grenzwerte der scheinbaren molaren Masse (Mapp)o ermittelt werden. Aus den (Mapp)o-Werten wird die Abhängigkeit der Größe (ln _PXz /m _BX ) _mPXz von der NaCI- bzw. NaClO₄-Molalität berechnet.Die Bestimmung der molaren Masse und der (stöchiometrischen) Ladungszahl eines Polymerelektrolyten aus den experimentell ermittelten (Mapp)o-Werten unter Anwendung der Lamm-Williams-Gleichung wird diskutiert. Zur Ermittlung der beiden Größen müssen mehrere Versuchsreihen mit zwei verschiedenen Fremdelektrolyten durchgeführt werden. Externe Messungen sind nicht erforderlich.Man erhält auf diese Weise verläßliche Werte so-wohl der molaren Masse als auch der (stächiometrischen) Ladungszahl.

---

Summary The sedimentation equilibria of the systems sodium metatungstate-sodium chloride-water and sodium metatungstate-sodium perchlorate-water are investiated. In both systems the apparent molecular mass Mapp of sodium metatungstate (PX _z) is measured in dependence on partial density ₀ ^PX _z before centrifugation. By linear extrapolation of the function Mapp = Mapp ( ₀ ^PX _z the limiting value (Mapp)o for ₀ ^PX _z = 0 is obtained. The variation with sodium chloride and sodium perchlorate molality of the quantity (ln _{PX z} ^m _BX )mPX_z is calculated from (Mapp)o data.The determination of the molecular mass and the algebraic valency of a polymeric ion by means of the (Mapp)o values calculated by Lamm-Williams equation is discussed. In order to obtain these two quantities at least two series of experiments are required, each of which using a different supporting electrolyte. External measurements are not necessary. In this way reliable values for the molecular mass as well as for the stoichiometric valency are obtained.

---

---

Mit 5 Abbildungen und 3 Tabellen