Headspace single-drop microextration for the detection of organotin compounds

The performance of single-drop microextraction (SDME), coupled with gas chromatography/mass spectrometry, was assessed for the determination of tributyltin compounds in water and solid samples. Experimental parameters impacting the performance of SDME, such as microextraction solvent and sampling and stirring time, were investigated. Analytical results obtained by SDME were compared with those generated by conventional solid phase microextraction (SPME) and liquid-liquid extraction (LLE) for the determination of TBT in PACS-2 sediment certified reference material (CRM).     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.     

Synthesis,reactions and catalytic activity of some mixed trifluorophosphine(triphenylphosphine)hydrido complexes of cobalt(I)

The complexes CoH(PF₃)_4?n (PPh₃)_n (n = 1–3) have been prepared by low from the reaction between CoH(PF₃)(PPh₃)₃ and butadiene. The hydrido complexes are active catalysts for the isomerisation of 1-octene to 2-octene under hydrogen or nitrogen.     

Inverse polarography with stationary amalgam anodes: Basic principles and technique

A new method of electrochemical analysis has been devised in which the metallic ions present in an electrolyte are discharged into a mercury cathode. The amalgam electrode so formed is then combined with a standard reference electrode in a suitable dissolution medium and the cell thus produced is allowed to supply current against an opposing voltage set up on a potentiometer. By decreasing the potentiometer voltage in stages a curve of current against potential can be constructed for the dissolution of the amalgam anode; in this curve each metal gives rise to a characteristic wave from the height of which the amount of metal originally present can be derived. Although the method is not so universally applicable as the conventional polarographic technique with the dropping mercury cathode, it possesses advantages in sensitivity and simplicity in suitable cases and may form a useful complementary method of analysis.     

THE USE OF LIQUID CHROMATOGRAPHY-MASS SPECTROMETRY TO MONITOR THE ALLOMERIZATION REACTIONS OF CHLOROPHYLL a and PHEOPHYTIN a:m IDENTIFICATION OF THE ALLOMERS OF PHEOPHYTIN a

Abstract— This paper reports a new method for monitoring the allomerization reactions of chlorophyll a and pheo-phytin a. Complex mixtures are generated from illuminating pure compounds and monitored using both diode array high-performance liquid chromatography (DAD-HPLC) and liquid chromatography-mass spectrometry (LC-MS). LC-MS allows molecular weight and fragment ion analysis of significant HPLC peaks. Five products of the degradation of chlorophyll a can be simultaneously detected in a mixture, namely the monohydroxy allomer, the methoxylactone allomer, pheophytin a and the two corresponding allomers of the pheophytin. It is demonstrated that more than one pathway must be involved in the in vitro photodegradation of chlorophyll a as shown by the simultaneous existence of several intermediates.     

Marine biological reference materials for methylmercury: analytical methodologies used in certification

Summary The methylmercury concentrations in three existing marine biological certified reference materials — TORT-1, DORM-1 and DOLT-1 — are determined by gas chromatography with electron capture detection, cold vapour atomic absorption spectrometry and inductively coupled plasma mass spectrometry after selective isolation of methylmercury. Two such procedures were used. These and the three analytical techniques are evaluated and compared. The certified methylmercury concentrations are: TORT-1, 0.128 ± 0.014; DORM-1, 0.731±0.060; and DOLT-1, 0.080 ± 0.011 g Hg/g dry weight.

---

Meeresbioligische Referenzmaterialien für Methylquecksilber: Analytische Methoden der Zertifizierung

     

Extremal problems for certain analytic (Nevanlinna) functions

We obtain sharp bounds on some basic functionals defined on the sets of all analytic functions having the representations \(f\left( z \right) \equiv \int\limits_{ - 1}^1 {\frac{{d\mu \left( t \right)}}{{z - t}}} \) and \(\varphi \left( z \right) \equiv \int\limits_{ - 1}^1 {\frac{{z\mu \left( t \right)}}{{1 - tz}}} \) ; respectively. Here μ is a probability measure.     

Step-scan FTIR time-resolved spectroscopy study of excited-state dipole orientation in soluble metallopolymers

Step-scan FTIR time-resolved spectroscopy (S2FTIR TRS) in acetonitrile-d3 has been used to probe the acceptor ligand in metal-to-ligand charge transfer (MLCT) excited states of amide-substituted polypyridyl complexes of RuII and in analogues appended to polystyrene. On the basis of ground-to-excited state shifts in v(C = O) of -31 cm-1 for the amide group in [RuII(bpy)2(bpyCONHEt')]2+ (bpyCONHEt' = 4'-methyl-2,2'-bipyridine-4-carboxamide-Et'; Et' = -CH2CH2BzCH2CH3) (1) and in the derivatized polystyrene abbreviated [PS-[CH2-CH2NHCObpy-RuII(bpy)2]20]40+ (3), the excited-state dipole is directed toward the amide-containing pyridyl group in the polymer side chain. Smaller shifts in v(C = O) of -17 cm-1 in [RuII(4,4'-(CONEt2)2bpy)2-(bpyCONHEt')]2+ (2) and in the derivatized polystyrene abbreviated [PS-[CH2CH2NHCObpy-RuII(4,4'-(CONEt2)2bpy)2]20]40+ (4) indicate that the excited-state dipole is directed toward one of the diamide bpy ligands. The nearly identical results for 1 and 3 and for 2 and 4 show that the molecular and electronic structures of the monomer excited states are largely retained in the polymer samples. These conclusions about dipole orientation in the polymers are potentially of importance in understanding intrastrand energy transfer dynamics. The excited-state dipole in 3 is oriented in the direction of the covalent link to the polymer backbone, and toward nearest neighbors. In 4, it is oriented away from the backbone.