Mechanistic Aspects of a Highly Active Dinuclear Zinc Catalyst for the Co‐polymerization of Epoxides and CO2

The dinuclear zinc complex reported by us is to date the most active zinc catalyst for the co‐polymerization of cyclohexene oxide (CHO) and carbon dioxide. However, co‐polymerization experiments with propylene oxide (PO) and CO₂ revealed surprisingly low conversions. Within this work, we focused on clarification of this behavior through experimental results and quantum chemical studies. The combination of both results indicated the formation of an energetically highly stable intermediate in the presence of propylene oxide and carbon dioxide. A similar species in the case of cyclohexene oxide/CO₂ co‐polymerization was not stable enough to deactivate the catalyst due to steric repulsion.     

Synthesis of methyl 2-oxo-5-vinyl-2,5-tetrahydrofuran-3-carboxylate

A synthesis of methyl 2-oxo-5-vinyl-tetrahydrofuran-3-carboxylate involving five synthetic steps from commercially available 3,4-dihydroxybutene is reported.     

Coligand role in the NHC nickel catalyzed C–F bond activation: investigations on the insertion of bis(NHC) nickel into the C–F bond of hexafluorobenzene

The reaction of [Ni(Mes₂Im)₂] (1) (Mes₂Im = 1,3-dimesityl-imidazolin-2-ylidene) with polyfluorinated arenes as well as mechanistic investigations concerning the insertion of 1 and [Ni(ⁱPr₂Im)₂] (1ipr) (ⁱPr₂Im = 1,3-diisopropyl-imidazolin-2-ylidene) into the C–F bond of C₆F₆ is reported. The reaction of 1 with different fluoroaromatics leads to formation of the nickel fluoroaryl fluoride complexes trans-[Ni(Mes₂Im)₂(F)(Ar^F)] (Ar^F = 4-CF₃-C₆F₄2, C₆F₅3, 2,3,5,6-C₆F₄N 4, 2,3,5,6-C₆F₄H 5, 2,3,5-C₆F₃H₂6, 3,5-C₆F₂H₃7) in fair to good yields with the exception of the formation of the pentafluorophenyl complex 3 (less than 20%). Radical species and other diamagnetic side products were detected for the reaction of 1 with C₆F₆, in line with a radical pathway for the C–F bond activation step using 1. The difluoride complex trans-[Ni(Mes₂Im)₂(F)₂] (9), the bis(aryl) complex trans-[Ni(Mes₂Im)₂(C₆F₅)₂] (15), the structurally characterized nickel(i) complex trans-[Ni^I(Mes₂Im)₂(C₆F₅)] (11) and the metal radical trans-[Ni^I(Mes₂Im)₂(F)] (12) were identified. Complex 11, and related [Ni^I(Mes₂Im)₂(2,3,5,6-C₆F₄H)] (13) and [Ni^I(Mes₂Im)₂(2,3,5-C₆F₃H₂)] (14), were synthesized independently by reaction of trans-[Ni(Mes₂Im)₂(F)(Ar^F)] with PhSiH₃. Simple electron transfer from 1 to C₆F₆ was excluded, as the redox potentials of the reaction partners do not match and [Ni(Mes₂Im)₂]⁺, which was prepared independently, was not detected. DFT calculations were performed on the insertion of [Ni(ⁱPr₂Im)₂] (1ipr) and [Ni(Mes₂Im)₂] (1) into the C–F bond of C₆F₆. For 1ipr, concerted and NHC-assisted pathways were identified as having the lowest kinetic barriers, whereas for 1, a radical mechanism with fluoride abstraction and an NHC-assisted pathway are both associated with almost the same kinetic barrier.

A combined experimental and theoretical study on the mechanism of the C–F bond activation of C₆F₆ with [Ni(NHC)₂] is provided.     

The structure of magnesium alanate

Mg(AlH(4))(2) was produced as a nanocrystalline powder by metathesis of NaAlH(4) and MgCl(2). Starting with a structure estimation which was developed from an evaluation of FTIR data and comparison of structural properties of two solvent adducts, quantum chemical calculations were performed on the density functional theory (DFT) level. The calculated atomic positions were used to simulate an X-ray powder diffraction pattern, based on a trigonal unit cell. The simulated pattern was congruent to experimental data. Thus, magnesium alanate exhibits a CdI(2) layer structure, the layers being formed by Mg atoms occupying the Cd sites and AlH(4) tedrahedra occupying the sites of the iodine atoms in CdI(2).     

Mimicking the two-dimensional spectrochemical series using density functional computations

With tetragonal distortions of tetrahedral d2 complexes as examples, nonadditive and additive ligand fields are compared computationally, using Kohn-Sham density functional theory (KS-DFT) and ligand-field theory to obtain 45 linear, parametrical equations. For each complex, a "data" reduction from three nonadditive-field parameters to two parameters of the additive field occurs. The complexes V and CrX4- (where X=F, Cl, Br, I) provide the two-dimensional spectrochemical series of the sigma and pi AOM parameters, which are known semiempirically for the halide ligands. The same parametrical results can be obtained from the Kohn-Sham orbital energies of the "average of configuration" computation.     

Ruthenium Complexes Containing "Noninnocent" o-Benzoquinone Diimine/o-Phenylenediamide(2-) Ligands. Synthesis and Crystal Structure of the Nitrido-Bridged Complex [{LRu(o-C(6)H(4)(NH)(2))}(2)(&mgr;-N)](PF(6))(2).3CH(3)CN.C(6)H(5)CH(3)

Reaction of LRu(III)Cl(3) (L = 1,4,7-trimethyl-1,4,7-triazacyclononane) with 1,2-phenylenediamine (opdaH(2)) in H(2)O in the presence of air affords [LRu(II)(bqdi)(OH(2))](PF(6)) (1), where (bqdi) represents the neutral ligand o-benzoquinone diimine. From an alkaline methanol/water mixture of 1 was obtained the dinuclear species [{LRu(II)(bqdi)}(2)(&mgr;-H(3)O(2))](PF(6))(3) (1a). The coordinated water molecule in 1 is labile and can be readily substituted under appropriate reaction conditions by acetonitrile, yielding [LRu(II)(bqdi)(CH(3)CN)](PF(6))(2) (2), and by iodide and azide anions, affording [LRu(II)(bqdi)I](PF(6)).0.5H(2)O (3) and [LRu(bqdi)(N(3))](PF(6)).H(2)O (4), respectively. Heating of solid 4 in vacuum at 160 degrees C generates N(2) and the dinuclear, nitrido-bridged complex [{LRu(o-C(6)H(4)(NH)(2))}(2)(&mgr;-N)](PF(6))(2) (5). Complex 5 is a mixed-valent, paramagnetic species containing one unpaired electron per dinuclear unit whereas complexes 1-4 are diamagnetic. The crystal structures of 1, 1a.3CH(3)CN, 3, 4.H(2)O, and 5.3CH(3)CN.0.5(toluene) have been determined by X-ray crystallography: 1 crystallizes in the monoclinic space group P2(1)/m, Z = 2, with a = 8.412(2) ?, b = 15.562(3) ?, c = 10.025 ?, and beta = 109.89(2) degrees; 1a.3CH(3)CN, in the monoclinic space group C2/c, Z = 4, with a = 19.858(3) ?, b = 15.483(2) ?, c = 18.192(3) ?, and beta = 95.95(2) degrees; 3, in the orthorhombic space group Pnma, Z = 4, with a = 18.399(4) ?, b = 9.287(2) ?, and c = 12.052(2) ?, 4.H(2)O, in the monoclinic space group P2(1)/c, Z = 4, with a = 8.586(1) ?, b = 15.617(3) ?, c = 16.388(5) ?, and beta = 90.84(2) degrees; and 5.3CH(3)CN.0.5(toluene), in the monoclinic space group P2(1)/c, Z = 4, with a = 15.003(3) ?, b = 16.253(3) ?, c = 21.196(4) ?, and beta = 96.78(3) degrees. The structural data indicate that in complexes 1-4 the neutral o-benzoquinone diimine ligand prevails. In contrast, in 5 this ligand has predominantly o-phenylenediamide character, which would render 5 formally a mixed-valent Ru(IV)Ru(V) species. On the other hand, the Ru-N bond lengths of the Ru-N-Ru moiety at 1.805(5) and 1.767(5) ? are significantly longer than those in other crystallographically characterized Ru(IV)=N=Ru(IV) units (1.72-1.74 ?). It appears that the C(6)H(4)(NH)(2) ligand in 5 is noninnocent and that formal oxidation state assignments to the ligands or metal centers are not possible.     

Xylose-DNA Containing the Four Natural Bases

Oligonucleotides containing (2′-deoxy-β-D -xylofuranosyl)guanine have been prepared. For this purpose 2-aminoadenosine ( 5 ) was synthesized and converted to 2′-deoxy-β-D -xyloguanosine ( 1 ). The related 2′-deoxy-β-D -xyloisoguanosine ( 3 ) and 2′-deoxy-β-D -xyloxanthosine ( 4 ) were also synthesized. Compound 1 was converted to the phosphonate and phosphoramidite building blocks 10 and 11 , respectively. The oligodeoxynucleotide (5′-3′)d(xG-xT-xA-xG-xA-xA-xT-xT-xC-xT-xA-xC-T) ( 18 ) formed a duplex with the same T_m as the parent (5′-3′)-(G-T-A-G-A-A-T-T-C-T-A-C) ( 19 ), but with an inverted CD spectrum.     

An average-of-configuration method for using Kohn-Sham density functional theory in modeling ligand-field theory

The Amsterdam Density Functional (ADF) package has been used to constrain Kohn-Sham DFT in such a fashion that a transition from KS-DFT to ligand-field theory in the form of the parametrical d(q)() model is completely well-defined. A relationship is established between the strong-field approximation of the parametrical d(2) model for the tetrahedral complexes VCl(4)(-) and VBr(4)(-) and certain fixed-orbital ADF-computed energies. In this way values for all the parameters of the d(2)() model may be computed, thus allowing the ADF results to be expressed in terms of a KS-DFT energy matrix that can be diagonalized. This means that the KS-DFT deficiency with regard to computation of nondiagonal elements has been overcome and the KS-DFT eigenenergies have become available through the KS-DFT mimicking of the ligand-field plus repulsion model. By using mutually orthogonal strong-field energy matrices, the mimicking has been further elucidated. The computed values for the empirical parameters of VCl(4)(-) and VBr(4)(-) are in good agreement with experimental data. The spectrochemical and the nephelauxetic series have been computed by including the remaining halide complexes and the quantitatively special position of F(-)() among the halides corroborated for both series.