Nitrogen bridgehead compounds part 21. Preparation of new quaternary 2,3a,6a-triazaphenalenium salts

The first representatives of a new ring system, the 2,3a,6a-triazaphenalenium quaternary salts are prepared by the cycloaddition of tetrahydro-4H-pyrido[1,2-a] pyrimidin-4-ones containing an α-chloroenamine moiety with azomethines.     

Cyclic sulfonium salts with S ... O interactions 2. Molecular structures with six-membered rings

1-[2-(N-methylcarbamoyl)phenyl]-3H-2,1-naphto-(1,8-d,e)-oxathiin-1-ium chloride (2), 1-[2-(N-methylcarbamoyl)-phenyl]-2-methyl-3-oxo-3H-1, 2-naphto-(1,8-d,e)-thiazin-1-ium chloride (3), 1-[8-(N-methylcarbamoyl)naphtyl]-2-methyl-3-oxo-3H-1, 2-naphto-(1,8-d,e)-thiazin-1-ium chloride (4) and 1-(8-carboxylatonaphtyl)-2-methyl-3-oxo-3H-1,2-naphto-(1,8-d,e)-thiazin-1-ium dipolar ion (5) cyclic sulfonium salts were prepared and their chemical properties investigated (spirosulfurane-formation, hydrolysis). The molecular structures obtained from x-ray diffraction can be described with a considerably distorted trigonal bipyramidal arrangement of the ligands about the sulfonium center, with O/N—S ... O=apical angles of 173.9, 164.9, 156.6, and 159.0°, as well as with S—O/N apical bond lengths of 1.648, 1.671, 1.664, and 1.682 Å. The structures exhibit relatively short S ... O close contacts with interatomic distances of 2.253, 2.448, 2.795, and 2.619 Å.     

Solid-state binding of dimethyl sulphoxide involving carboxylic host molecules. X-ray crystal structures of four inclusion species

The crystal structures of four dimethyl sulphoxide (DMSO) inclusion compounds with different carboxylic acid hosts,1–4, have been studied by single crystal X-ray analysis. Crystals of thetrans-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid inclusion compound (1a), [1 · DMSO (1: 1)] show monoclinic (P2₁/n) symmetry with the unit cell dimensionsa = 11.522(4),b = 18.658(2),c = 8.709(1) Å and = 98.92(2)°. The clathrate of the 9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid (2a), [2 · DMSO (1: 2)] is triclinic (P) with the cell dimensionsa = 15.043(7),b =9.657(4),c = 8.118(7) Å, = 101.81(5), = 96.05(4) and = 100.04(4)°. Triclinic (P) symmetry is shown also by the inclusion compound of 9,10-dihydro-9,10-ethanoanthracene-11-monocarboxylic acid (3a) [3 · DMSO (1:1)] with the cell dimensionsa=6.3132(1),b=7.9846(2),c=17.5314(4) Å, = 96.46(2), = 87.08(2) and = 106.02(2)°. The 9,9-bianthryl-2-monocarboxylic acid clathrate (4a) [4 · DMSO (1:1)] is monoclinic (P2₁/n) and the cell dimensions area = 19.625(18),b = 8.817(1),c = 14.076(8) Å and = 97.92(6)°. In all these structures, the hosts show the same basic recognition pattern for the DMSO guest, involving a strong O-H ... O bond from the COON to the S=O group, and a possible C-H ... O type interaction between the carbonyl O atom of the host and a CH₃ group of the guest. The crystals consist of discrete host-guest aggregates which are mainly held together by weak intermolecular interactions of the Van der Waals' type. The stoichiometries of the aggregates are, however, different.     

Direct Observation of an Oxepin from a Bacterial Cytochrome P450‐Catalyzed Oxidation

The cytochromes P450 are hemoproteins that catalyze a range of oxidative C?H functionalization reactions, including aliphatic and aromatic hydroxylation. These transformations are important in a range of biological contexts, including biosynthesis and xenobiotic biodegradation. Much work has been carried out on the mechanism of aliphatic hydroxylation, implicating hydrogen atom abstraction, but aromatic hydroxylation is postulated to proceed differently. One mechanism invokes as the key intermediate an arene oxide (and/or its oxepin tautomer). Conclusive isolation of this intermediate has remained elusive and, currently, direct formation of phenols from a Meisenheimer intermediate is believed to be favored. We report here the identification of a P450 [P450_cam (CYP101A1) and P450_cin (CYP176A1)]‐generated arene oxide as a product of in vitro oxidation of tert‐butylbenzene. Computations (CBS‐QB3) predict that the arene oxide and oxepin have similar stabilities to other arene oxides/oxepins implicated (but not detected) in P450‐mediated transformations, suggesting that arene oxides can be unstable terminal products of P450‐catalyzed aromatic oxidation that can explain the origin of some observed metabolites.     

Characterization and optimization of heroin hapten-BSA conjugates: method development for the synthesis of reproducible hapten-based vaccines

A potential new treatment for drug addiction is immunization with vaccines that induce antibodies that can abrogate the addictive effects of the drug of abuse. One of the challenges in the development of a vaccine against drugs of abuse is the availability of an optimum procedure that gives reproducible and high yielding hapten-protein conjugates. In this study, a heroin/morphine surrogate hapten (MorHap) was coupled to bovine serum albumin (BSA) using maleimide-thiol chemistry. MorHap-BSA conjugates with 3, 5, 10, 15, 22, 28, and 34 haptens were obtained using different linker and hapten ratios. Using this optimized procedure, MorHap-BSA conjugates were synthesized with highly reproducible results and in high yields. The number of haptens attached to BSA was compared by 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay, modified Ellman’s test and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Among the three methods, MALDI-TOF MS discriminated subtle differences in hapten density. The effect of hapten density on enzyme-linked immunosorbent assay (ELISA) performance was evaluated with seven MorHap-BSA conjugates of varying hapten densities, which were used as coating antigens. The highest antibody binding was obtained with MorHap-BSA conjugates containing 3–5 haptens. This is the first report that rigorously analyzes, optimizes and characterizes the conjugation of haptens to proteins that can be used for vaccines against drugs of abuse. The effect of hapten density on the ELISA detection of antibodies against haptens demonstrates the importance of careful characterization of the hapten density by the analytical techniques described.     

Enzyme-catalyzed kinetic resolution of N-Boc-trans-3-hydroxy-4-phenylpyrrolidine

The first enzyme-catalyzed kinetic resolution of tert-butyl-3-hydroxy-4-phenylpyrrolidine-1-carboxylate is presented. Enzyme, solvent and temperature optimization resulted in a new resolution method with E = 40 enantioselectivity. The acetate derivative of the (+)-(3S,4R) enantiomer formed while the (?)-(3R,4S) isomer remained intact. Very good enantioselectivities (E > 200) were achieved in the enzyme-catalyzed alcoholysis of the racemic acetate in i-propanol and t-butanol where the (+)-(3S,4R) enantiomer was prepared in pure form (ee > 99.7%). Absolute configuration of the (?)-(3R,4S)-enantiomer was determined by single crystal X-ray diffraction method.      

Synthesis and X-ray crystallographic studies of novel proton-ionizable nitro- and halogen-substituted acridono-18-crown-6 chromo- and fluorogenic ionophores

Starting from acridono-18-crown-6 ligand 1 (Fig. 1) seven new proton-ionizable chromogenic and fluorogenic ionophores 2-8 (Fig. 1) containing NO₂ group(s) and/or Br or Cl atom(s) in the aromatic rings were prepared by electrophilic substitution. The precursor macrocycle 1 was obtained by a modification of the reported procedure which made chromatography unnecessary in purification and gave higher yield. X-ray crystallographic studies of the complexes of acridono-18-crown-6 type ligands 1, 2, 3, 6 and 8 show that the proton-ionizable units are in the acridone tautomeric form and that the ligands invariably bind a water molecule in their cavities by multipodal hydrogen bonding. In two cases (6 and 8) an additional DMF solvent molecule is also bound at the crown perimeter in the solid state.     

Synthesis,Characterization, and Application of Platinum(II) Complexes Incorporating Racemic and Optically Active 4‐Chloro‐5‐Methyl‐1‐Phenyl‐1,2,3,6‐Tetrahydrophosphinine Ligand

An efficient resolution method was elaborated for the preparation of (+)‐4‐chloro‐5‐methyl‐1‐phenyl‐1,2,3,6‐tetrahydrophosphinine oxide using the acidic Ca²⁺ salt of (–)‐O,O‐di‐p‐toluoyl‐(2R,3R)‐tartaric acid. Crystal structure of the diastereomeric complex was evaluated by single crystal X‐ray analysis. Beside this, the absolute P‐configuration was also determined by a circular dichroism (CD) spectroscopic study including theoretical calculations. The tetrahydrophosphinine oxide was then converted to the corresponding platinum complex whose stereostructure was investigated by high‐level quantum chemical calculations. The Pt complex was tested as a catalyst in the hydroformylation of styrene.     

Mechanistic investigation of the iridium-catalysed alkylation of amines with alcohols

The [Cp*IrCl(2)](2)-catalysed alkylation of amines with alcohols was investigated using a combination of experimental and theoretical methods. A Hammett study involving a series of para-substituted benzyl alcohols resulted in a line with a negative slope. This clearly documents that a positive charge is built up in the transition state, which in combination with the measurement of a significant kinetic isotope effect determines hydride abstraction as being the selectivity-determining step under these conditions. A complementary Hammett study using para-substituted anilines was also carried out. Again, a line with a negative slope was obtained suggesting that nucleophilic attack on the aldehyde is selectivity-determining. A computational investigation of the entire catalytic cycle with full-sized ligands and substrates was performed using density functional theory. The results suggest a catalytic cycle where the intermediate aldehyde stays coordinated to the iridium catalyst and reacts with the amine to give a hemiaminal which is also bound to the catalyst. Dehydration to the imine and reduction to the product amine also takes place without breaking the coordination to the catalyst. The fact that the entire catalytic cycle takes place with all the intermediates bound to the catalyst is important for the further development of this synthetic transformation.