Greater insight into the MTDSC technique involving fundamental sinusoidal heat flow equations

Summary Modulated temperature DSC was investigated, comparing data found experimentally to that derived from theory. Deviation from theory was found with regard to the amplitude of the modulated heat flow signal when large modulation amplitudes were employed in the experiment. These deviations were determined to be dependent on the absolute temperature and it was concluded that further investigation of the heat flow signal obtained during MTDSC experiments is required.     

Cluster chemistry: XXXVIII. Reactions between M(C2R)(PR′3 (M = Cu,Ag, Au; R = Ph,C6F5; R′ = Me Ph) and H2Os3(CO)10: X-ray structures of Os3Au(μ-CHCHR)(CO)10(PPh3) (R = Ph and C6F5)

The reactions of Os₃(μ-H)₂(CO)₁₀ with a series of Group IB metal acetylide-tertiary phosphine complexes are described. Whereas the compounds M(C₂C₆F₅)(PPh₃) (M = Cu, Ag, Au) afforded the complexes MOs₃(μ-CHCHC₆F₅)(CO)₁₀(PPh₃) cleanly and in high yield, complex mixtures of products were obtained from reactions of the analogous phenylacetylides. The complexes MOs₃(μ-CHCHPh)(CO)₁₀(PPh₃), MOs₃(μ-CHCHPh)(CO)₉(PPh₃)₂ and MOs₃(μ-H)(CO)₁₀(PPh₃) (of known structure), and MOs₃(μ-CHCHPh)(CO)₉(PPh₃)₂ and HMOs₃(CHCPh)(CO)₈ (of unknown structure) were characterised; Au(C₂Ph)(PMe₃) afforded similar derivatives. The reactions proceed by oxidative-addition and hydrogen migration steps; MP bond cleavage reactions also occur to a small extent. The molecular structures of AuOs₃(μ-CHCHC₆R₅)(CO)₁₀(PPh₃) (R = F or H) were determined by X-ray analyses. For R = F, crystals are triclinic, space group P$\text{1}$ with a 9.081(2), b 13.291(2), c 17.419(2) Å, α 84.49(1), β 76.20(2), γ 75.81(2)° and Z = 2; 4622 observed data [I > 2.5σ(I)] were refined to R = 0.027, R_W = 0.031. For R = H, crystals are triclinic, space group P$\text{1}$, with a 9.403(4), b 13.448(3), c 13.774(4) Å, α 83.34(2), β 88.66(3), γ 70.21(3)°, and Z = 2; 4405 observed data [I > 2.5σ(I)] were refined to R = 0.030, R_W = 0.033. The two molecules differ in the orientation of the Ph rings of the PPh₃ groups, but are otherwise similar to Os₃(μ-H)(μ-CHCHBu^t)(CO)₁₀ with the μ-H ligand replaced by the isolobal μ-Au(PPh₃) group.     

Inorganic-Organic Hybrid Polymers from the Polymerisation of Methacrylate-Substituted Oxotantalum Clusters with Methylmethacrylate: A Thermomechanical and Spectroscopic Study

New inorganic-organic hybrid materials were prepared by free-radical polymerization of methyl methacrylate (MMA) with methacrylate-substituted oxotantalum cluster [Ta₄O₄(OEt)₈(OMc)₄] and their properties evaluated. The cluster was prepared by the reaction of the parent alkoxide with methacrylic acid. Samples of the hybrid materials were produced with Ta-cluster to methyl methacrylate in the ratios of 1:50 and 1:100 and were characterized by thermal and spectroscopic techniques. The glass transition temperatures of the hybrid materials are shifted to higher temperatures than pure PMMA as a result of cross-linking of the polymer by the oxotantalum clusters. The increase in T_g is also observed from the dynamic mechanical analysis (DMA). Evidence of crosslinking between the Ta-cluster and PMMA is obtained from infrared spectroscopic study. Surface studies performed by X-ray photoelectron spectroscopy (XPS) provide information about the atomic concentrations of the surface and indicate tantalum bonded to oxygen.     

The effect of functionalization on structure and electrical conductivity of multi-walled carbon nanotubes

Nanosized powders of Ti-Nb oxide core-shell nanocrystals with atomic ratios of Nb/Ti = 0.11, 0.25, and 0.38 have been prepared by two preparation routes. The first route was co-precipitation, followed by␣annealing, using NbCl₅ as a source of Nb. The second route was coating of pure TiO₂ nanocrystals by Nb-isopropoxide in liquid medium, followed by impregnation of the Nb into the nanoparticles by annealing. Both methods yielded anatase nanocrystals with a Nb-rich shell and a core, which had much lower Nb loadings. The anatase structure solid solution (with Nb incorporated) was stable under annealing up to 760°C. The particle size remained within the nanometric scale (<50 nm) under heat-treatment up to 760°C. It has been shown that the fabricated powders can be redispersed in aqueous media by simple ultrasound treatment, resulting in nanosized dispersions. Using a variety of analytical techniques, including depth profiling of single nanocrystallites by AES combined with sputtering by Ar ions, the mechanism of the core-shell structure creation was studied. It is proposed that the formation of the core-shell structure is governed by solubility limitations in the co-precipitation route and by solubility and diffusion limitations in the coating-incorporation route.     

The synthesis and characterisation of novel dimethyl- and diphenyl-silanediolates

Dimethyl- and diphenylsilanediolates are key intermediates in the preparation of dimethyl- and diphenyl-siloxane polymers. Both dimethyl- and diphenylsilanediolates R₂Si(OM)₂, where R = Me or Ph, and M = Li, Na and K were synthesised by the reaction between dimethyl- and diphenylsilanediol and a metal or metal hydride (M/MH where M = Li, Na and K). The silanediolates were characterised by ²⁹Si, ¹³C and ¹H NMR, FTIR and mass spectroscopy.     

Characterisation of Polyurethane Coatings Using Thermoanalytical Techniques

A two-pack polyurethane coating was analyzed using thermoanalytical techniques. The curing reaction, monitored using pressure differential calorimetry (PDSC), rheometry and dynamic mechanical analysis (DMA) shows the temperature dependency of activation energy and hence rate of curing. In-situ ATR-FTIR shows the formation of urethane linkage over time. The decomposition behavior carried out under non-isothermal mode using thermogravimetric analysis (TGA) shows bimodal behavior. The activation energies of the initial step (10% decomposition) from both iso and non-isothermal experiments are in very good agreement with each other. The use of dynamic mechanical analysis (DMA) shows the difference in glass transition behavior (T_g) and elastic modulus (E') due to the different state of cure. Also the coating exhibits a very broad loss modulus peak (E') indicating higher energy dissipation with deformation.This revised version was published online in November 2005 with corrections to the Cover Date.     

Polyhedral oligomeric silsesquioxane bound fulleropyrrolidines

The first reported examples of polyhedral oligomeric silsesquioxane (POSS) cages containing a fulleropyrrolidine species are reported herein. Monosubstituted POSS‐dioxalane species were synthesized through the hydrosilylation of a silyl‐dioxalane with mono‐vinyl substituted POSS. Subsequent deprotection yielded the desired aldehyde functionality. An alternative synthetic pathway, involving the nucleophilic substitution of mono‐benzyl chloride POSS with 4‐hydroxybenzaldehyde yielded the desired aldehyde functionality. Each mono‐aldehyde POSS was then reacted with N‐methylglycine and C₆₀ to yield the desired POSS fulleropyrrolidines. The prepared compounds were characterized by multinuclear NMR, electrospray mass spectrometry, elemental analysis, UV–vis, fluorescence and optical power limiting measurements. Copyright © 2008 John Wiley & Sons, Ltd.     

Cluster Chemistry: XVII.Radical ion-initiated synthesis of ruthenium cluster carbonyls containing tertiary phosphines,phosphites, arsines,SbPh3, or isocyanides

The syntheses of over sixty known and new derivatives of Ru₃(CO)₁₂ and H₄Ru₄(CO)₁₂ by substitution reactions initiated by sodium diphenylketyl are described. The range of ligands studied includes isocyanides, tertiary phosphines and phosphites, tertiary arsines and SbPh₃. The reactions are characterised by high degrees of specificity and conversion: under mild conditions up to four ligands can be introduced. Comparisons with the corresponding thermally induced reactions are made in several cases. The reactions provide routes to mixed ligand derivatives of the cluster carbonyls, although account of relative Lewis base strengths of the ligands may have to be taken. Possible mechanisms of these reactions are discussed briefly, as are the IR ν (CO) spectra of the Ru₃ (CO)_12-nL_n complexes.     

Synthesis of POSS–polyurethane hybrids using octakis(m‐isoprenyl‐α,α′‐dimethylbenzylisocyanato dimethylsiloxy) octasilsesquioxane (Q8M8TMI) as a crosslinking agent

A series of polyurethane hybrid networks have been synthesized using octakis(m‐isoprenyl‐α,α′‐dimethylbenzylisocyanato dimethylsiloxy) octasilsesquioxane (Q₈M₈^TMI) as a crosslinking agent. The formation of the urethane linkages within the polyurethane hybrids was confirmed by photoacoustic FTIR spectroscopy. The TGA and DSC studies demonstrated that the incorporation of the POSS crosslinking agents altered the thermal properties of the polyurethanes, and that this was dependent on the length of the polyethylene glycol chain. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5038–5045     

Structural Effects on the Decomposition Kinetics of EPDM Elastomers by High-Resolution TGA and Modulated TGA

Effects of ethylene content and maleated EPDM content on the thermal stability and degradation kinetics of ethylene propylene diene monomer (EPDM) have been studied using high resolution thermogravimetric analysis (Hi-Res TGA) and Modulated TGA (MTGA). Modulated TGA shows that EPDM degradation is complex, with activation energy of degradation increasing throughout the degradation. Values from both dynamic and constant heating rate experiments are in good agreement with each other and with the literature value. However, the dynamic heating rate experiment shows that if the difference of peak temperature of components in a system is less than 5°C, Hi-Res TGA does not resolve them.This revised version was published online in November 2005 with corrections to the Cover Date.