Ground-state properties of LiV2O4 and Li1-xZnx(V1-yTiy)2O4

We present susceptibility, microwave resistivity, NMR and heat-capacity results for Li_1-xZn_x(V_1-yTi_y)₂O₄ with 0 ? x ? 0.3 and 0 ? y ? 0.3. For all doping levels the susceptibility curves can be fitted with a Curie-Weiss law. The paramagnetic Curie-Weiss temperatures remain negative with an average value close to that of the pure compound Θ≈ - 36 K. Spin-glass anomalies are observed in the susceptibility, heat-capacity and NMR measurements for both type of dopants. From the temperature dependence of the spin-lattice relaxation rate we found critical-dynamic behavior in the Zn doped compounds at the freezing temperatures. For the Ti-doped samples two successive freezing transitions into disordered low-temperature states can be detected. The temperature dependence of the heat capacity for Zn-doped compounds does not resemble that of canonical spin glasses and only a small fraction of the total vanadium entropy is frozen at the spin-glass transitions. For pure LiV₂O₄ the spin-glass transition is completely suppressed. The temperature dependence of the heat capacity for LiV₂O₄ can be described using a nuclear Schottky contribution and the non-Fermi liquid model, appropriate for a system close to a spin-glass quantum critical point. Finally an ( x / y , T )-phase diagram for the low-doping regime is presented. Received 16 March 2001 and Received in final form 30 October 2001     

Stable products of spheres in the non-linear coupling of oscillators or quasi-periodic motions

For generic families of vector fields or transformations, normally hyperbolic invariant products of spheres appear near partially elliptic rest points. To cite this article: M. Kammerer-Colin de Verdière, C. R. Acad. Sci. Paris, Ser. I 339 (2004).     

More compact invariant manifolds appearing in the non-linear coupling of oscillators

Near partially elliptic rest points of generic families of vector fields or transformations, many types of normally hyperbolic invariant compact manifolds can appear, diffeomorphic to intersections of quadrics. To cite this article: M. Chaperon et al., C. R. Acad. Sci. Paris, Ser. I 342 (2006).     

Parallel and multiplexed bead-based assays and encoding strategies

Advances in high throughput screening (HTS), together with the rapid progress in combinatorial chemistry, genomic and proteomic sciences have dramatically stimulated the development of a variety tools to enable the drug discovery process to become more efficient. Major future challenges in HTS include obtaining high density and good quality data based on assays that are rapid, reliable, inexpensive, sensitive, simple and miniaturised. This paper reviews the development and role of bead-based assays for HTS including DNA and single nucleotide polymorphism (SNP) assays, particularly from a multiplex perspective and evaluating the recent advances in bead-based arrays. The encoding strategies that are commonly used in bead-based assays are highlighted, while the importance of magnetic beads in genomic and proteomic purifications is discussed. In conclusion, bead-based assays offer a powerful promising approach for many aspects of drug discovery.     

The oxime bond formation as an efficient tool for the conjugation of ruthenium complexes to oligonucleotides and peptides

A convenient method for the conjugation of ruthenium complex on oligonucleotides and peptides through chemoselective oxime linkage is reported. Novel Ru(II) complexes sustaining an aminooxy containing ligand were prepared and efficiently coupled with the oligonucleotides and peptides functionalized with the complementary reactive aldehyde group. The method described herein could be a useful tool for preparing a broad range of metal complex-oligonucleotide and peptide conjugates.     

Identification of markers of thermal processing (“roasting”) in aqueous extracts of Coffea arabica L. seeds through NMR fingerprinting and chemometrics

Roasting of Coffea arabica L. seeds gives rise to chemical reactions that produce more than 800 compounds, some being responsible for the desired organoleptic properties for which the beverage called “coffee” is known. In the industry, the “roasting profile,” that is, the times and temperatures applied, is key to influence the composition of roasted coffee beans and the flavour of the beverage made from them. The impact of roasting on the chemical composition of coffee has been the subject of numerous studies, including by nuclear magnetic resonance (NMR) spectroscopy. However, the roasting equipment and profiles applied in these studies are often far from real industrial conditions. In this work, the effects of two critical technological parameters of the roasting process, namely, the “development time” (the period of time after the “first crack,” a characteristic noise due to seed disruption) and the final roasting temperature on coffee extracts, were investigated. Seeds were roasted at pilot scale according to 13 industrial roasting profiles and extracted in D₂O. The extracts were analysed by ¹H NMR experiments. The NMR spectra were compared using (a) quantitative analysis of main signals by successive orders of magnitude and (b) chemometric tools (principal component analysis, partial least squares and sparse-orthogonal partial least squares analysis). This allowed to identify compounds, which may serve as markers of roasting and showed that changes in chemical composition can be detected even for slight change in final temperature (~1°C) or in total roasting time (~25 s).     

Aggregation of tetrameric acid in xylene and its interaction with asphaltenes by isothermal titration calorimetry

Journal of Thermal Analysis and Calorimetry - This paper describes the self-association of tetrameric acids (TA) and their interactions with asphaltenes using isothermal titration calorimetry. In...     

Asymmetric synthesis of the four stereoisomers of 5-deoxystrigol

Two approaches to the strigolactone tricyclic lactone skeleton 2 were investigated using ketene/ketene-iminium cycloaddition to olefins. Finally, the first enantioselective access to the four stereoisomers of 5-deoxystrigol 1 is reported using an intramolecular [2+2] cycloaddition of homochiral ketene-iminium salts 5. Very high asymmetric control was achieved with C-2 symmetric pyrrolidines as chiral auxiliary.     

Screening of Wood/Forest and Vine By-Products as Sources of New Drugs for Sustainable Strategies to Control Fusarium graminearum and the Production of Mycotoxins

Fusarium graminearum is a fungal pathogen that can colonize small-grain cereals and maize and secrete type B trichothecene (TCTB) mycotoxins. The development of environmental-friendly strategies guaranteeing the safety of food and feed is a key challenge facing agriculture today. One of these strategies lies on the promising capacity of products issued from natural sources to counteract crop pests. In this work, the in vitro efficiency of sixteen extracts obtained from eight natural sources using subcritical water extraction at two temperatures was assessed against fungal growth and TCTB production by F. graminearum. Maritime pine sawdust extract was shown to be extremely efficient, leading to a significant inhibition of up to 89% of the fungal growth and up to 65% reduction of the mycotoxin production by F. graminearum. Liquid chromatography/mass spectrometry analysis of this active extract revealed the presence of three families of phenolics with a predominance of methylated compounds and suggested that the abundance of methylated structures, and therefore of hydrophobic compounds, could be a primary factor underpinning the activity of the maritime pine sawdust extract. Altogether, our data support that wood/forest by-products could be promising sources of bioactive compounds for controlling F. graminearum and its production of mycotoxins.     

Improving the flame retardancy of polyamide 6 by incorporating hexachlorocyclotriphosphazene modified MWNT

A nitrogen‐, phosphorus‐ and chlorine‐containing flame retardant, hexachlorocyclotriphosphazene (HCTP), has been covalently grafted onto the surface of multi‐wall carbon nanotubes (MWNT) to obtain MWNT‐HCTP. Polyamide 6 (PA6)/MWNT composites were then prepared via melt compounding. The flammability of PA6/MWNT composite was characterized by cone calorimetry, limiting oxygen index (LOI) and UL‐94 tests. The results showed that peak heat release rate of samples containing 3 wt% MWNT‐HCTP was only 460 kW/m², which decreased by 35.2% compared with that of a neat PA6 sample. The LOI value was increased from 22.7% to 26.5%, and UL‐94 test performance was also significantly improved by the presence of MWNT‐HCTP. Scanning electron microscope (SEM) and optical microscope analysis showed that modified MWNT had a better dispersion and compatibility in PA6 than unmodified MWNT. The composition of residue chars and volatile products was investigated by SEM/energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric‐FTIR, respectively. It was proposed that grafted HCTP was mainly functioned in the condensed phase, where P, N can synergistically promote char formation and Cl element can catch free radicals to terminate the chain reaction during combustion of the PA6 composite. Copyright © 2014 John Wiley & Sons, Ltd.