A Modular Approach to Atropisomeric Bisphosphines of Diversified Electronic Density on Phosphorus Atoms

The series of C₂-symmetric biaryl core-based non-racemic bisphosphines possessing substituents of different electronic properties: both EDG and EWG were obtained in a short sequence of good yielding transformations, started from commercial 1,3-dimethyl-2-nitrobenzene. Several different approaches leading to the desirable ligands were practically evaluated. Notably, the synthesis of the entire series of ligands could be performed with the utilization of a single early-stage precursor DIDAB (6,6′-diiodo-2,2′,4,4′-tetramethylbiphenyl-3,3′-diamine), which could be easily obtained in enantiomerically pure form. The obtained compounds at concentrations of 50 and 200 µM showed various biological activity against normal human dermal fibroblast, ranging from inactivity through time-dependent action and ending up with high toxicity.     

The First Online Capillary Electrophoresis-Microscale Thermophoresis (CE-MST) Method for the Analysis of Dynamic Equilibria—The Determination of the Acidity Constant of Fluorescein Isothiocyanate

This article presents the first successful application of a capillary electrophoresis-microscale thermophoresis tandem technique (CE-MST) for determining the values of equilibrium constant, realized by connecting online the CE and MST instruments using a fused-silica capillary. The acid-base dissociation of fluorescein isothiocyanate, expressed by the acidity constant value (pK_a), was used as a model. The measurement procedure consisted of introducing a mixture containing the analyte and a deliberately added interferent into the CE capillary, electrophoretic separation of the analyte from the interferent, the detection of the analyte with a CE-integrated detector, detection with a MST detector, and then stopping the flow temporarily by turning off the voltage source to conduct the thermophoretic measurement. The analysis of migration times, peak areas and MST responses obtained concurrently for the same sample allowed us to determine the pK_a value using three independent methods integrated within one instrumentation. The analyte was effectively separated from the interferent, and the acidity values turned out to be consistent with each other. An attempt was also made to replace the standard commercial CE instrument with a home-made portable CE setup. As a result, the similar pK_a value was obtained, at the same time proving the possibility of increasing cost efficiency and reducing energy consumption. Overall, the CE-MST technique has a number of limitations, but its unique analytical capabilities may be beneficial for some applications, especially when sample separation is needed prior to the thermophoretic measurement.     

Low-Molecular Pyrazine-Based DNA Binders: Physicochemical and Antimicrobial Properties

Pyrazine and its derivatives are a large group of compounds that exhibit broad biological activity, the changes of which can be easily detected by a substituent effect or a change in the functional group. The present studies combined theoretical research with the density functional theory (DFT) approach (B3LYP/6-311+G**) and experimental (potentiometric and spectrophotometric) analysis for a thorough understanding of the structure of chlorohydrazinopyrazine, its physicochemical and cytotoxic properties, and the site and nature of interaction with DNA. The obtained results indicated that 2-chloro-3-hydrazinopyrazine (2Cl3HP) displayed the highest affinity to DNA. Cytotoxicity studies revealed that the compound did not exhibit toxicity toward human dermal keratinocytes, which supported the potential application of 2Cl3HP in clinical use. The study also attempted to establish the possible equilibria occurring in the aqueous solution and, using both theoretical and experimental methods, clearly showed the hydrophilic nature of the compound. The experimental and theoretical results of the study confirmed the quality of the compound, as well as the appropriateness of the selected set of methods for similar research.     

Pyrolysis of Porous Organic Polymers under a Chlorine Atmosphere to Produce Heteroatom-Doped Microporous Carbons

Three types of cross-linked porous organic polymers (either oxygen-, nitrogen-, or sulfur-doped) were carbonized under a chlorine atmosphere to obtain chars in the form of microporous heteroatom-doped carbons. The studied organic polymers constitute thermosetting resins obtained via sol-gel polycondensation of resorcinol and five-membered heterocyclic aldehydes (either furan, pyrrole, or thiophene). Carbonization under highly oxidative chlorine (concentrated and diluted Cl₂ atmosphere) was compared with pyrolysis under an inert helium atmosphere. All pyrolyzed samples were additionally annealed under NH₃. The influence of pyrolysis and additional annealing conditions on the carbon materials’ porosity and chemical composition was elucidated.     

DOSY NMR as a tool for predicting optimal conditions for hydrogel formation: The case of a hyperbranched polyglycidol cross‐linked with boronic acids

This article demonstrates the utility of DOSY NMR for the determination of the optimal conditions for the efficient covalent, reversible cross‐linking of macromolecules in water for hydrogel formation. The studied model system was hyperbranched polyglycidol (HbPGL) containing numerous diol groups in peripheral regions and two types of boronic acids, that is, B(OH)₄^? and benzene‐1,4‐boronic diacid, as cross‐linking agents. Diffusion coefficient changes of a polymer in solution, under the influence of various concentrations of cross‐linking agent and pH, which influences the equilibrium of the reaction between boronic acids and diols, were recorded. These data are consistent with the rheological properties, namely the G′_max(ω) of hydrogels prepared under analogous conditions, from more concentrated solutions of HbPGL. This approach appears to be promising as it facilitates avoiding the loss of a large amount of polymer that is necessary for the elaboration of appropriate conditions for network formation in aqueous media. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2171–2178     

Zinc Imine Polyhedral Oligomeric Silsesquioxane as a Quattro-Site Catalyst for the Synthesis of Cyclic Carbonates from Epoxides and Low-Pressure CO2

In the present research, the synthesis, spectroscopic characterization, and structural investigations of a unique Zn^II complex of imine-functionalized polyhedral oligomeric silsesquioxane (POSS) is designed, and hereby described, as a catalyst for the synthesis of cyclic carbonates from epoxides and CO₂. The uncommon features of the designed catalytic system is the elimination of the need for a high pressure of CO₂ and the significant shortening of reaction times commonly associated with such difficult transformations like that of styrene oxide to styrene carbonate. Our studies have shown that imine-POSS is able to chelate metal ions like Zn^II to form a unique coordination complex. The silsesquioxane core and the hindrance of the side arms (their steric effect) influence the construction process of the homoleptic Zn₄@POSS-1 complex. The compound was characterized in solution by NMR (¹H, ¹³C, ²⁹Si), ESI-MS, UV/Vis spectroscopy and in the solid state by thermogravimetric/differential thermal analysis (TG-DTA), elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), cross-polarization magic angle spinning (CP MAS) NMR (¹³C, ²⁹Si) spectroscopy, and X-ray crystallography.     

Synthesis of activated carbon foams with high specific surface area using polyurethane elastomer templates for effective removal of methylene blue

Carbon foams have gained significant attention due to their tuneable properties that enable a wide range of applications including catalysis, energy storage and wastewater treatment. Novel synthesis pathways enable novel applications via yielding complex, hierarchical material structure. In this work, activated carbon foams (ACFs) were produced from waste polyurethane elastomer templates using different synthesis pathways, including a novel one-step method. Uniquely, the produced foams exhibited complex structure and contained carbon microspheres. The ACFs were synthesized by impregnating the elastomers in an acidified sucrose solution followed by direct activation using CO₂ at 1000 ℃. Different pyrolysis and activation conditions were investigated. The ACFs were characterized by a high specific surface area (S_BET) of 2172 m²/g and an enhanced pore volume of 1.08 cm³/g. Computer tomography and morphological studies revealed an inhomogeneous porous structure and the presence of numerous carbon spheres of varying sizes embedded in the porous network of the three-dimensional carbon foam. X-ray diffraction (XRD) and Raman spectroscopy indicated that the obtained carbon foam was amorphous and of turbostratic structure. Moreover, the activation process enhanced the surface of the carbon foam, making it more hydrophilic via altering pore size distribution and introducing oxygen functional groups. In equilibrium, the adsorption of methylene blue on ACF followed the Langmuir isotherm model with a maximum adsorption capacity of 592 mg/g. Based on these results, the produced ACFs have potential applications as adsorbents, catalyst support and electrode material in energy storage systems.     

Keratin Scaffolds Containing Casomorphin Stimulate Macrophage Infiltration and Accelerate Full-Thickness Cutaneous Wound Healing in Diabetic Mice

Impaired wound healing is a major medical challenge, especially in diabetics. Over the centuries, the main goal of tissue engineering and regenerative medicine has been to invent biomaterials that accelerate the wound healing process. In this context, keratin-derived biomaterial is a promising candidate due to its biocompatibility and biodegradability. In this study, we evaluated an insoluble fraction of keratin containing casomorphin as a wound dressing in a full-thickness surgical skin wound model in mice (n = 20) with iatrogenically induced diabetes. Casomorphin, an opioid peptide with analgesic properties, was incorporated into keratin and shown to be slowly released from the dressing. An in vitro study showed that keratin-casomorphin dressing is biocompatible, non-toxic, and supports cell growth. In vivo experiments demonstrated that keratin-casomorphin dressing significantly (p < 0.05) accelerates the whole process of skin wound healing to the its final stage. Wounds covered with keratin-casomorphin dressing underwent reepithelization faster, ending up with a thicker epidermis than control wounds, as confirmed by histopathological and immunohistochemical examinations. This investigated dressing stimulated macrophages infiltration, which favors tissue remodeling and regeneration, unlike in the control wounds in which neutrophils predominated. Additionally, in dressed wounds, the number of microhemorrhages was significantly decreased (p < 0.05) as compared with control wounds. The dressing was naturally incorporated into regenerating tissue during the wound healing process. Applied keratin dressing favored reconstruction of more regular skin structure and assured better cosmetic outcome in terms of scar formation and appearance. Our results have shown that insoluble keratin wound dressing containing casomorphin supports skin wound healing in diabetic mice.