Controlled Double-Bond Migration in Palladium-Catalyzed Intramolecular Arylation of Enamidines

Palladium-catalyzed intramolecular cyclization of N-(N'-tert-butylformimidoyl)-6-[2-(2-iodophenyl)ethyl]-1,2,3,4-tetrahydropyridine (1a) and N-(N'-tert-butylformimidoyl)-6-[3-(2-iodophenyl)propyl]-1,2,3,4-tetrahydropyridine (1b) respectively results in formation of spiro compounds 1'-(N-tert-butylformimidoyl)-3',4'-dihydrospiro[indan-1,2'(1'H)-pyridine] (4a), 1'-(N-tert-butylformimidoyl)-1',6'-dihydrospiro[indan-1,2'(3'H)-pyridine] (5a), and 1'-(N-tert-butylformimidoyl)-5',6'-dihydrospiro[indan-1,2'(1'H)-pyridine] (6a) and 1'-(N-tert-butylformimidoyl)-3,3',4,4'-tetrahydrospiro[naphthalene-1(2H),2'(1'H)-pyridine] (4b), 1'-(N-tert-butylformimidoyl)-1',3,4,6'-tetrahydrospiro[naphthalene-1(2H),2'(3'H)-pyridine] (5b), and 1'-(N-tert-butylformimidoyl)-3,4,5',6'-tetrahydrospiro[naphthalene-1(2H),2'(1'H)-pyridine] (6b). The double-bond migration process can be controlled, and any of the three double-bond isomers can be prepared by employing proper ligands. A combination of BINAP and the amidine function was required to obtain the isomers 5a and 5b with the double bond in the homoallylic position relative to the aryl group. An electrospray ionization mass spectrometric study was conducted to support suggested reaction intermediates.     

L-proline catalyzed asymmetric transfer aldol reaction between diacetone alcohol and aldehydes

We demonstrate for the first time, L-proline as a chiral catalyst for transfer aldol reaction between aldehydes and diacetone alcohol.     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

Formulation and In Vitro Evaluation of Sustained Release Microspheres of Diltiazem Hydrochloride Prepared by Emulsification-Internal Gelation Method

The present work describes the formulation of alginate microspheres containing diltiazem hydrochloride by the emulsification-internal gelation method with the use of barium carbonate as a cross-linking agent. The effect of various factors (the concentration of alginate and barium chloride) on the drug loading efficiency and in vitro release were investigated. Fourier transform infrared microscopy (FTIR) and differential scanninig calorimetry (DSC) analysis confirmed the absence of any drug polymer interaction. X-ray diffraction (XRD) pattern showed that there is a decrease crystallinity of the drug. The in vitro drug release profile could be altered significantly by changing various processing parameters to give a controlled release of drug from microcapsules. The stability studies of drug-loaded microcapsules showed that the drug was stable at different storage conditions.     

Synthesis of linseed oil based biodegradable homo and copolymers: role as multifunctional greener additives in lube oil

Abstract

Homopolymer of linseed oil and its four copolymers with styrene, 1-decene, isodecyl acrylate and octyl acrylate, respectively, have been synthesized in this present context. The prepared polymers are characterized by NMR and FTIR spectroscopy. The molecular weights have been measured by gel permeation chromatography. Their effectiveness as pour point depressant (PPD), viscosity index improver (VII) and their shear stability in terms of permanent shear stability index have been evaluated in lube oil. The copolymers acted as better PPDs than the homopolymer whereas the homopolymer of linseed oil excelled as VII. Further it was observed that all the prepared polymers were stable enough under severe mechanical shear.     

In-vitro drug–drug interaction studies of diltiazem with floroquinolones

Diltiazem is an established cardiovascular drug mainly used for the management of hypertension specifically for the angina pectoris. Fluoroquinolones are widely prescribed against the treatment of severe infections. In vitro relations of diltiazem with fluoroquinolones (ciprofloxacin, levofloxacin, norfloxacin, and ofloxacin) were examined using spectrophotometric and separation techniques, i.e., RP-HPLC. Diltiazem’s availabilities were observed to be predisposed highly in the presence of fluoroquinolones. To investigate the mechanism of interaction in a variety of dissolution environments, i.e., simulating body environments with regard to pH on these interactions has been studied. Moreover, complex of diltiazem–fluoroquinolones were prepared and elucidated through IR spectroscopy and confirmed by computational molecular modeling.     

Adsorption kinetics of alkanethiol-capped gold nanoparticles at the hexane–water interface

The pendant drop technique was used to characterize the adsorption behavior of n-dodecane-1-thiol and n-hexane-1-thiol-capped gold nanoparticles at the hexane–water interface. The adsorption process was studied by analyzing the dynamic interfacial tension versus nanoparticle concentration, both at early times and at later stages (i.e., immediately after the interface between the fluids is made and once equilibrium has been established). A series of gold colloids were made using nanoparticles ranging in size from 1.60 to 2.85 nm dissolved in hexane for the interfacial tension analysis. Following free diffusion of nanoparticles from the bulk hexane phase, adsorption leads to ordering and rearrangement of the nanoparticles at the interface and formation of a dense monolayer. With increasing interfacial coverage, the diffusion-controlled adsorption for the nanoparticles at the interface was found to change to an interaction-controlled assembly and the presence of an adsorption barrier was experimentally verified. At the same bulk concentration, different sizes of n-dodecane-1-thiol nanoparticles showed different absorption behavior at the interface, in agreement with the findings of Kutuzov et al. (Phys Chem Chem Phys 9:6351–6358, 2007). The experiments additionally demonstrated the important role played by the capping agent. At the same concentration, gold nanoparticles stabilized by n-hexane-1-thiol exhibited greater surface activity than gold nanoparticles of the same size stabilized by n-dodecane-1-thiol. These findings contribute to the design of useful supra-colloidal structures by the self-assembly of alkane-thiol-capped gold nanoparticles at liquid–liquid interfaces.     

A new method of representation of fiber creep data tensile creep behavior of some acrylic fibers

Summary Fiber creep data are usually represented as plots of extension versus time at constant stress and temperature. Fiber samples, however, exhibit some degree of variability in structure from filament to filament. Consequently, even when initial applied stresses are nominally equivalent (as determined by measurement of cross-sectional area, and load), the creep of individual fibers can differ significantly, and the creep behavior of a sample can only be characterized statistically.Structural parameters such as orientation, which affect fiber properties greatly, and therefore creep, are not considered in the conventional representation of creep data. Orientation, in turn, is associated with stretch or extension. On this basis, creep, i. e. creep rate, can be expected to depend on extension.In the proposed method for representing creep data, the rate of creep is related to the extension at a constant time and temperature. In these so-called isochronal creep rate curves, the use of stress as an independent variable is omitted, and is replaced by extension. This method of representation discloses common creep characteristics in fibers, which, though taken from the same sample, exhibit widely different creep behavior when treated conventionally. In this way, the creep behavior of the whole sample can be conveniently represented. These plots reveal more detail than the ordinary creep curves, and indicate different creep mechanisms within certain extension regions as well as the stretch-relaxation history of the particular fiber sample. In this paper, the aspects and limitations of these two methods of representation of creep data are discussed, and their relative merits are demonstrated using experimental acrylic fibers.     

Simultaneous determination of gliquidone, pioglitazone hydrochloride, and verapamil in formulation and human serum by RP-HPLC

In the present study, a reverse-phase high performance liquid chromatography method was developed, validated and applied for the simultaneous determination of gliquidone, pioglitazone hydrochloride and verapamil in tablets and human serum. Chromatographic separation was achieved on a C18 column (5 μm, 25 × 0.46 cm) with a mobile phase consisting of methanol-water-acetonitrile (80:10:10 v/v/v) with a flow rate of 0.7 mL/min and pH adjusted to 3.50 with phosphoric acid at 230 nm. Glibenclamide was used as internal standard. The experimentally derived limit of detection and limit of quantitation were determined to be 0.24, 0.93, 0.40, and 0.80, 3.11, 1.36 μg/mL for gliquidone, pioglitazone, and verapamil, respectively. There were no interfering peaks due to the excipients present in the pharmaceutical tablets. Thus, the proposed method is simple and suitable for the simultaneous analysis of active ingredients in dosage forms and human serum.