A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Syntheses of 5‐alkylthio‐1,3‐diaryl‐1,2,4‐triazoles

Arylation of the readily available 3‐alkythio‐5‐aryl‐1,2,4‐triazoles gave 5‐alkylthio‐1,3‐diaryl‐1,2,4‐triazoles in moderate yield. The structures of the latter were confirmed by NOE and ¹³C‐NMR.     

The stable forking conjecture and generic structures

 We prove that for any simple theory which is constructed via Fr?issé-Hrushovski method, if the forking independence is the same as the d-independence then the stable forking property holds. Received: 22 January 2001 / Published online: 19 December 2002 This article is part of the author's D-Phil thesis, written at the University of Oxford and supported by the Ministry of Higher Education of Iran. The author would like to thank the Institute for Studies in Theoretical Physics and Mathematics (IPM), Tehran, Iran, for its financial support whilst working on this article. Mathematics Subject Classification (2000): 03C45 Key words or phrases: Generic structures – Fr?issé-Hrushovski method – Predimension – Simple theories – Stable theories – Stable forking conjecture     

The effect of substituents on the extraction behavior of hydroxamic acids

The extraction behavior of several alkyl-substituted hydroxamic acids in chloroform solution with several metal ions is described. Among the N-phenylacylhydroxamic acids used, those with o-alkyl substituents on either the phenyl or acyl ring generally do not extract metals, apparently because of steric problems at the O=CNO^? chelation site. An improved synthesis of substituted hydroxamic acids is reported.     

Structural characterization of single-walled carbon nanotube bundles by experiment and molecular simulation

A procedure, combining molecular simulation, Raman spectroscopy, and standard nitrogen adsorption, is developed for structural characterization of single-walled carbon nanotube (SWNT) samples. Grand canonical Monte Carlo simulations of nitrogen adsorption are performed on the external and internal adsorption sites of homogeneous arrays of SWNTs of diameters previously determined by Raman spectroscopy of the sample. The results show the importance of the peripheral grooves of a nanotube bundle at low relative pressure and the insensitivity of nanotube diameter toward adsorption on the external surface of the bundle at higher pressures. Simulations also reveal that samples containing thin nanotubes have less internal adsorption capacity that saturates at lower pressure than those comprising large diameter nanotubes. The fraction of open-ended nanotubes in a sample can be estimated by scaling the simulated internal adsorption inside nanotubes to obtain a near perfect fit between simulated and experimental isotherms. This procedure allows extrapolation of adsorption properties to conditions in which all nanotubes in the sample are open-ended.     

Determination of association constants between enantiomers of orciprenaline and methyl-beta-cyclodextrin as chiral selector by capillary zone electrophoresis using a partial filling technique

The principles for the determination of conditional association constants of enantiomers by capillary zone electrophoresis employing a partial filling technique (PFT) using methyl-beta-cyclodextrin as chiral selector is presented. Orciprenaline was used as a model compound. Partial filling is a separation technique, where different lengths of the chiral selector solution are introduced into the capillary to a final zone length shorter than the effective length of the capillary, prior to application of the solutes. Lengthening of the separation zone results in improving enantioresolution in addition to decreasing electrophoretic mobility of the enantiomers, because of longer interaction time between the solute and chiral selector. The degree of the reduction in electromobility depends on the affinity of the solute to the chiral selector, i.e. strength of the complex formed between the solute and cyclodextrin. The decrease in the electrophoretic mobility with increasing length of the separation zone is used for determination of the association constant. The association constants of the enantiomers of orciprenaline and the chiral selector were evaluated from the slope of the plot, observed electrophoretic mobility versus the ratio between the length of the separation zone and the effective length of the capillary. It was found that the association constants were independent of the chiral selector concentration. The mean values were 110 M(-1) and 160 M(-1) for respective enantiomer. Constants obtained by a conventional CE technique were in good agreement with those from the PFT experiments. The highest enantioselectivityy was obtained when about 50% of the solute was distributed to the selector phase.     

Structural Elucidation of {[(CH3)2SnCl2·H2O]2·18-crown-6} n and its Hydrogen Bonding in Solution by HMBC Spectroscopy

Behavior of {[(CH₃)₂SnCl₂·H₂O]₂·18-crown-6}_n in solution have been investigated by HMBC NMR. The results show that coordination of water to tin containing species and its hydrogen bonding to crown ether remains intact in non-coordinating solvent in contrast to coordinating solvent. H-NMR reveals that the chemical shift of water in complex varies by solvent of crystallization.     

NMR study of the stoichiometry,stability and exchange kinetics of complexation reaction between Pb2+ ion and 18-crown-6 in binary acetonitrile-water mixtures

Proton NMR was used to study the complexation reaction between lead ion and 18-crown-6 in a number of binary acetonitrile-water mixtures. Formation constant for the resulting 11 complexes in different solvent mixtures was determined by computer fitting of the chemical shift-mole ratio data. There is an inverse relationship between the complex stability and amount of water in the mixed solvent. The dissociative kinetics of the complex was studied by proton line-shape analysis. The Arrhenius plots showed a distinct isokinetic temperature at about 25°C at which the decomplexation rate is more or less independent of the solvent composition. the complexation rate and the activation parameters E _a , H and S, for the exchange have been determined and found to be strongly solvent dependent. There is actually a linear relationship between the mole fraction of acetonitrile in the mixed solvent and logarithm of the stability constant as well as activation parameters.     

Theoretical study on interaction of different coordination modes of BH4 ligand with transition metal in [TM(BH4)(CO)4] (TM = Cr, Mo)

Density functional calculations were performed on bonding and structural features of [(ηⁿ-BH₄)TM(CO)₄]⁻ (n = 1, 2, 3; TM = Cr, Mo) complexes. Calculations show that the ground state is bidentate which is in good agreement with experimental results. It has been found that the bridge and terminal hydrogen atoms will interchange by two pathways: (i) twist of BH₄ about one of the bridge B-H and (ii) twist of BH₄ about one of the terminal B-H. The molecular orbital calculations and natural bond orbital methodologies for different isomers of these complexes have been evaluated. The final results indicate that case (i) is more preferable relative to another case.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.