Novel tacrine-based acetylcholinesterase inhibitors as potential agents for the treatment of Alzheimer’s disease: Quinolotacrine hybrids

A new series of quinolotacrine hybrids including cyclopenta- and cyclohexa-quinolotacrine derivatives were designed, synthesized, and assessed as anti-cholinesterase (ChE) agents. The designed derivatives indicated higher inhibitory effect on the acetylcholinesterase (AChE) with IC₅₀ values of 0.285–100 µM compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 µM. Of these compounds, cyclohexa-quinolotacrine hybrids displayed a little better anti-AChE activity than cyclopenta-quinolotacrine hybrids. Compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c'] diquinolin-6-one (6m) including 3-hydroxyphenyl and cyclohexane ring moieties exhibited the best AChE inhibitory activity with IC₅₀ value of 0.285 µM. The kinetic and molecular docking studies indicated that compound 6m occupied both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE as a mixed inhibitor. Using neuroprotective assay against H₂O₂-induced cell death in PC12 cells, the compound 6h illustrated significant protection among the assessed compounds. In silico ADME studies estimated good drug-likeness for the designed compounds. As a result, these quinolotacrine hybrids can be very encouraging AChE inhibitors to treat Alzheimer’s disease.

Graphic abstract

A novel series of quinolotacrine hybrids were designed, synthesized, and evaluated against AChE and BChE enzymes as potential agents for the treatment of AD. The hybrids showed good to significant inhibitory activity against AChE (0.285–100 μM) compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 μM. Among them, compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c′] diquinolin-6-one (6 m) bearing 3-hydroxyphenyl moiety and cyclohexane ring exhibited the highest anti-AChE activity with IC₅₀ value of 0.285 μM. The kinetic and molecular docking studies illustrated that compound 6 m is a mixed inhibitor and binds to both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE.

     

Capillary electrophoresis: An integrated system with a unique split-flow sample introduction mechanism

The performance of an integrated capillary electrophoresis system with a novel split-flow sample injection mechanism and special high sensitivity UV absorbance detector is described. Sample introduction into the capillary is accomplished with a standard HPLC-type microliter syringe. The injected sample is divided proportionally between the separation capillary and an adjustable splitvent. The volume of sample introduced into the capillary can be manipulated by varying the length or the i.d. of the splitvent tubing; or the volume of sample injected. Data are presented showing reproducibility of retention time, peak height, and peak area; minimum detectability; and operation at short UV wavelengths.     

Phyto-synthesis of silver nanoparticles using aerial extract of Salvia leriifolia Benth and evaluation of their antibacterial and photo-catalytic properties

Research on Chemical Intermediates - We have synthesized silver nanoparticles (Ag-NPs) via a simple and eco-friendly method through the utilization of aqueous aerial parts of Salvia leriifolia...     

Trimethylsilylation of Alcohols and Phenols,and Direct Acetylation of Silyl Ethers Catalyzed by Fe(ClO4)3.6H2O

In this article, a mild and efficient protocol for the trimethylsilylation of various aliphatic and benzylic alcohols and phenols with trimethylsilyl chloride using a catalytic amount of ferric perchlorate at room temperature and relatively short reaction times in good to excellent yields is reported. Direct acetylation of trimethylsilyl ethers catalyzed with Fe(ClO ₄ ) ₃ .6H ₂ O(0.02 mmol)/Fe(ClO ₄ ) ₃ SiO ₂ (0.2 g) using acetic anhydride at ambient temperature is also reported.     

Solvent‐Free Chemoselective Synthesis of 1,1‐Diacetates Catalyzed by Cu(NO3)2 · 3H2O

1,1‐Diacetates have been synthesized by the reaction of a variety of aldehydes with acetic anhydride in the presence of cupric nitrate as catalyst under solvent‐free conditions. Ketones were not converted to the corresponding diacetates under these conditions.     

Lewis Acid Mediated Vinyl‐Transfer Reaction of Alkynes to N‐Alkylimines by Using the N‐Alkyl Residue as a Sacrificial Hydrogen Donor

A variety of N‐alkyl‐α,α‐dichloroaldimines were vinylated by terminal acetylenes in the presence of Lewis acids such as In(OTf)₃ or BF₃ ? OEt₂ and hexafluoroisopropanol (HFIP) as an additive. The reaction proceeds at ambient temperature and leads to geometrically pure allylic β,β‐dichloroamines. This approach is complementary to previously reported transition‐metal‐catalyzed vinyl‐transfer methods, which are not applicable to aliphatic imines and are restricted to imines that contain an electron‐withdrawing nitrogen substituent. In the present approach, terminal alkynes were used as a source of the vinyl residue, and the N‐alkyl moiety of the imine acts as a sacrificial hydrogen donor. The additional advantage of this methodology is the fact that no external toxic or hazardous reducing agents or molecular hydrogen has to be used. This new methodology nicely combines a C(sp²)? C(sp) bond formation, hydride transfer, and an unusual cleavage of an unactivated C? N bond, thereby giving rise to functionalized primary allylic amines. A detailed experimental study supported by DFT calculations of the mechanism has been done.     

Polyvinylimidazole/sol–gel composite as a novel solid‐phase microextraction coating for the determination of halogenated benzenes from aqueous solutions

A polyvinylimidazole/sol–gel composite is proposed as a novel solid‐phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol–gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples.     

Analysis of tamoxifen and its main metabolites in plasma samples of breast cancer survivor female athletes: Multivariate and chemometric optimization

A sensitive method based on liquid chromatography combined with a diode array detector was developed and validated to simultaneously determine tamoxifen, and its active metabolites N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen in human plasma samples. The green and sustainable vortex-assisted dispersive liquid-phase microextraction technique based on the natural hydrophobic deep eutectic solvent was used for the extraction and preconcentration of the analytes. Chemometrics and multivariate analysis were used to optimize the independent variables including the type and volume of deep eutectic solvent, extraction time, and ionic strength. Under optimal conditions, calibration curves were linear in a suitable range with the lower limits of quantification (0.8–10.0 μg/L), which covered the relevant concentrations of the analytes in plasma samples for a clinical study. Intra- and interday precision evaluated at three concentrations for the analytes were lower than 8.2 and 12.1%, respectively. Accuracy was in the range of 94.9–104.7%. The applicability of the developed method on human plasma samples illustrated the range 45.1–72.8, 98.4–128.3, 0.9–1.2, and 2.7–6.1 μg/L for tamoxifen, N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen, respectively. The validated method can be effective for the pharmacokinetics, pharmacodynamics, and therapeutic drug monitoring studies of tamoxifen and its main metabolites in biological fluids.     

Complexes with Atomic Gold Ions: Efficient Bis-Ligand Formation

Complexes of atomic gold with a variety of ligands have been formed by passing helium nanodroplets (HNDs) through two pickup cells containing gold vapor and the vapor of another dopant, namely a rare gas, a diatomic molecule (H₂, N₂, O₂, I₂, P₂), or various polyatomic molecules (H₂O, CO₂, SF₆, C₆H₆, adamantane, imidazole, dicyclopentadiene, and fullerene). The doped HNDs were irradiated by electrons; ensuing cations were identified in a high-resolution mass spectrometer. Anions were detected for benzene, dicyclopentadiene, and fullerene. For most ligands L, the abundance distribution of AuL_n⁺ versus size n displays a remarkable enhancement at n = 2. The propensity towards bis-ligand formation is attributed to the formation of covalent bonds in Au⁺L₂ which adopt a dumbbell structure, L-Au⁺-L, as previously found for L = Xe and C₆₀. Another interesting observation is the effect of gold on the degree of ionization-induced intramolecular fragmentation. For most systems gold enhances the fragmentation, i.e., intramolecular fragmentation in AuL_n⁺ is larger than in pure L_n⁺. Hydrogen, on the other hand, behaves differently, as intramolecular fragmentation in Au(H₂)_n⁺ is weaker than in pure (H₂)_n⁺ by an order of magnitude.     

Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition