Synthesis of amidocrownophanes with 27‐ and 28‐membered rings and their molecular recognition toward urea and its derivatives

Novel crownophanes with 27‐ and 28‐membered rings having two hydroxyl groups, two amide groups, and aromatic moieties such as naphthalene, pyridine, and phenyl rings were successfully synthesized by a one‐step reaction from the corresponding macrocyclic polyethers via “tandem Claisen rearrengement” in moderate yields. They can solubilize urea and its derivatives into chloroform solution, while the corresponding macrocyclic polyethers do not solubilize them. According to NMR studies, crownophanes 1 and 2 interact with urea and its derivatives forming 1:1 complexes.     

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.     

Geochemical characterization of miocene core sediments from Shahbazpur gas-wells (Bangladesh) in terms of elemental abundances by instrumental neutron activation analysis

Journal of Radioanalytical and Nuclear Chemistry - Geochemical characterization of Shahbazpur structure (Bengal Foredeep) in terms of elemental abundances obtained from INAA are presented by...     

An investigation of phase transformation and crystallinity in laser surface modified H13 steel

This paper presents a laser surface modification process of AISI H13 tool steel using 0.09, 0.2 and 0.4 mm size of laser spot with an aim to increase hardness properties. A Rofin DC-015 diffusion-cooled CO₂ slab laser was used to process AISI H13 tool steel samples. Samples of 10 mm diameter were sectioned to 100 mm length in order to process a predefined circumferential area. The parameters selected for examination were laser peak power, overlap percentage and pulse repetition frequency (PRF). X-ray diffraction analysis (XRD) was conducted to measure crystallinity of the laser-modified surface. X-ray diffraction patterns of the samples were recorded using a Bruker D8 XRD system with Cu?K _α (λ=1.5405 Å) radiation. The diffraction patterns were recorded in the 2θ range of 20 to 80°. The hardness properties were tested at 981 mN force. The laser-modified surface exhibited reduced crystallinity compared to the un-processed samples. The presence of martensitic phase was detected in the samples processed using 0.4 mm spot size. Though there was reduced crystallinity, a high hardness was measured in the laser-modified surface. Hardness was increased more than 2.5 times compared to the as-received samples. These findings reveal the phase source of the hardening mechanism and grain composition in the laser-modified surface.     

Turning the Tap: Conformational Control of Quantum Interference to Modulate Single‐Molecule Conductance

Together with the more intuitive and commonly recognized conductance mechanisms of charge‐hopping and tunneling, quantum‐interference (QI) phenomena have been identified as important factors affecting charge transport through molecules. Consequently, establishing simple and flexible molecular‐design strategies to understand, control, and exploit QI in molecular junctions poses an exciting challenge. Here we demonstrate that destructive quantum interference (DQI) in meta‐substituted phenylene ethylene‐type oligomers (m‐OPE) can be tuned by changing the position and conformation of methoxy (OMe) substituents at the central phenylene ring. These substituents play the role of molecular‐scale taps, which can be switched on or off to control the current flow through a molecule. Our experimental results conclusively verify recently postulated magic‐ratio and orbital‐product rules, and highlight a novel chemical design strategy for tuning and gating DQI features to create single‐molecule devices with desirable electronic functions.     

Laser micro-processing of amorphous and partially crystalline Cu45Zr48Al7 alloy

This paper presents a microstructural study of laser micro-processed high-purity Cu₄₅Zr₄₈Al₇ alloys prepared by arc melting and Cu-mould casting. Microprocessing of the Cu₄₅Zr₄₈Al₇ alloy was performed using a Rofin DC-015 diffusion-cooled CO₂ slab laser system with 10.6-μm wavelength. The laser was defocused to a spot size of 0.2 mm on the sample surface. The laser parameters were set to give 300- and 350-W peak power, 30% duty cycle and a 3000-Hz laser pulse repetition frequency (PRF). About 100-micrometer-wide channels were scribed on the surfaces of disk-shaped amorphous and partially crystalline samples at traverse speeds of 500 and 5000 mm/min. These channels were analysed using scanning electron microscopy (SEM) and 2D stylus profilometry. The metallographic study and profile of these processed regions are discussed in terms of the applied laser processing parameters. The SEM micrographs showed that striation marks developed at the edge and inside these regions as a result of the laser processing. The results from this work showed that microscale features can be produced on the surface of amorphous Cu–Zr–Al alloys by CO₂ laser processing.     

Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications

A 1.5-kW CO₂ laser in pulsed mode at 3 kHz was used to investigate the effects of varied laser process parameters and resulting morphology of AISI 316L stainless steel. Irradiance and residence time were varied between 7.9 to 23.6 MW/cm² and 50 to 167 μs, respectively. A strong correlation between irradiance, residence time, depth of processing and roughness of processed steel was established. The high depth of altered microstructure and increased roughness were linked to higher levels of both irradiance and residence times. Energy fluence and surface temperature models were used to predict levels of melting occurring on the surface through the analysis of roughness and depth of the region processed. Microstructural images captured by the SEM revealed significant grain structure changes at higher irradiances, but due to increased residence times, limited to the laser in use, the hardness values were not improved.     

Atomic diffusion in laser surface modified AISI H13 steel

This paper presents a laser surface modification process of AISI H13 steel using 0.09 and 0.4 mm of laser spot sizes with an aim to increase surface hardness and investigate elements diffusion in laser modified surface. A Rofin DC-015 diffusion-cooled CO₂ slab laser was used to process AISI H13 steel samples. Samples of 10 mm diameter were sectioned to 100 mm length in order to process a predefined circumferential area. The parameters selected for examination were laser peak power, pulse repetition frequency (PRF), and overlap percentage. The hardness properties were tested at 981 mN force. Metallographic study and energy dispersive X-ray spectroscopy (EDXS) were performed to observe presence of elements and their distribution in the sample surface. Maximum hardness achieved in the modified surface was 1017 HV_0.1. Change of elements composition in the modified layer region was detected in the laser modified samples. Diffusion possibly occurred for C, Cr, Cu, Ni, and S elements. The potential found for increase in surface hardness represents an important method to sustain tooling life. The EDXS findings signify understanding of processing parameters effect on the modified surface composition.     

Amidocrownophanes as Anion Receptor

Crownophanes composed of 28-membered ring atoms having two hydroxy groups, two amide groups, and aromatic parts such as naphthalene rings and either pyridine or benzene ring, can bind anions with high affinity and selectivity. The anion-coordination ability of these species has been observed by ¹H NMR techniques. As anion guest molecules, we selected some halides, dihydrogenphosphate and acetate ions. It has been found that amidocrownophanes, 3 and 4, can recognize anions in the order;H₂PO ₄ ⁻ >F⁻>CH₃COO⁻>Cl⁻>>Br⁻ and I⁻, while not only 1, 2, and 5 having no hydroxy group but also 6 having 27-membered ring have no ability for anion recognition under the same conditions. In order to exhibit the recognition ability for anion receptor, plural amide groups, hydroxy groups, and m-phenylene or 1,6-pyridyl rigid part play an important role in this macrocyclic system.