Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide)

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE_n-b-EO_m) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO_m without the thermo-responsive EGE_n segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE_n segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.     

Nitroxide‐mediated radical polymerization in miniemulsion: Bimolecular termination in monomer‐free model systems

Bimolecular termination in nitroxide‐mediated radical polymerization in miniemulsion has been investigated through the heating of a polystyrene–2,2,6,6‐tetramethylpiperidinyl‐1‐oxy macroinitiator and its 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy analogue in an aqueous toluene dispersion with sodium dodecyl benzenesulfonate as a surfactant at 125 °C. The level of bimolecular termination by combination, evaluated from the high‐molecular‐weight shoulder, was higher in miniemulsion than in solution and increased with decreasing particle size. Quantitative analysis revealed that these results cannot be rationalized solely by nitroxide partitioning to the aqueous phase. The results are explained by an interface effect, by which nitroxide is adsorbed or located at the aqueous–organic interface. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4995–5004, 2007     

Mu spin exchange in polarized media

A study has been made of highly nitrogenated pure iron and iron-aluminum alloy powder containing 2 wt.% Al (Fe-2Al) using Mössbauer spectroscopy and X-ray diffraction. The samples were prepared by high-temperature, high-pressure diffusion of nitrogen. They were prepared in a hot-isostatic-pressure (HIP) furnace at 1000 °C at nitrogen pressures up to 200 MPa. The alloy powders contained up to 8 at.% nitrogen as determined by vacuum fusion analysis. XRD analysis indicates that for the pure iron powders, the lattice spacing remained independent of nitrogen concentration, but that for the Fe-2Al powders, it decreased with increasing nitrogen concentration. Mössbauer analysis showed that for the pure iron powders, most of the nitrogen was associated with the formation of the iron nitride Fe₄N. For the alloy powders containing less than 5 at.% nitrogen, all of the nitrogen was contained interstitially. The presence of nitrogen completely eliminated the conduction-electron spin-density oscillations observed in many ferromagnetic alloys.     

Dielectric behavior of polyethyleneoxide (polyox)

Ohne Zusammenfassung     

Influence of shell strength on shape transformation of micron-sized,monodisperse, hollow polymer particles

Micron-sized, monodisperse, non-spherical polymer particles with "rugby ball" and "red blood corpuscle"-like shapes were produced by seeded polymerization of the dispersion of (divinylbenzene/vinylbiphenyl/xylene)-swollen polystyrene particles prepared by utilizing the dynamic swelling method which the authors proposed in 1991. Their non-spherical shapes were based on buckling of the shell of the resultant hollow particles. In this article, the reversible shape transformation of the hollow composite polymer particle between spherical and such non-spherical shapes was studied in detail by controlling the shell strength. A part of the shell was buckled by external pressure which was caused by evaporation of xylene from the hollow when the shell had the tensile modulus below the critical value calculated from the pressure-buckling relationship of a spherical shell proposed by Uemura. The plasticization of the shell by a good solvent was one of key factors for the shape transformation.     

Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

Novel Z-selective head-to-head dimerization of terminal alkynes catalyzed by lanthanide half-metallocene complexes

Various terminal alkynes have been cleanly dimerized into the corresponding head-to-head (Z)-enynes by use of the half-metallocene lutetium alkyl complexes Me2Si(C5Me4)(NAr)Lu(CH2SiMe3)(THF) (Ar = Ph, C6H3Me2-2,6, C6H2Me3-2,4,6) as catalysts. Aromatic C-Cl, C-Br, and C-I bonds, which are known to be extremely susceptible to reductive cleavage by transition metals, survived in the present reactions. The corresponding dimeric alkynide species [Me2Si(C5Me4)(NAr)Lu(mu-CCR)]2 are thought to be the true catalysts, some of which have been isolated and structurally characterized. These alkynide species were thermally stable and soluble at the reaction temperatures (80-110 degrees C), but they precipitated upon cooling to room temperature after completion of the reaction. Therefore, this catalyst system works homogeneously but can be separated and reused, thus constituting the first example of a recyclable catalyst system for the dimerization of terminal alkynes and also the first example of (Z)-selective head-to-head dimerization of aromatic terminal alkynes.     

Influence of nonionic emulsifier included inside carboxylated polymer particles on the formation of multihollow structure by the alkali/cooling method

The influence of nonionic emulsifier, included inside styrene-methacrylic acid copolymer [P(S-MAA)] particles during emulsion copolymerization, on the formation of multihollow structure inside the particles via the alkali/cooling method (proposed by the authors) was examined in comparison to emulsifier-free particles. It was clarified that the nonionic emulsifier included inside the P(S-MAA) particles eased the formation of multihollow structure.Part CCL of the series studies on suspension and emulsion     

ALFALFA SEEDLINGS GROWN OUTDOORS ARE MORE RESISTANT TO UV-INDUCED DNA DAMAGE THAN PLANTS GROWN IN A UV-FREE ENVIRONMENTAL CHAMBER

Abstract The relative UV sensitivities of alfalfa seedlings grown outdoors versus plants grown in a growth chamber under UV-filtered cool white fluorescent bulbs have been determined using three criteria: (1) level of endogenous DNA damage as sites for the UV endonuclease from Micrococcus luteus . (2) susceptibility to pyrimidine dimer induction by a UV challenge exposure and (3) ability to repair UV-induced damage. We find that outdoor-grown plants contain approximately equal frequencies of endogenous DNA damages, are less susceptible to dimer induction by a challenge exposure of broad-spectrum UV and photorepair dimers more rapidly than plants grown in an environmental chamber under cool white fluorescent lamps plus a filter that removes most UV radiation. These data suggest that plants grown in a natural environment would be less sensitive to UVB-induced damage than would be predicted on the basis of studies on plants grown under minimum UV.