Tumor cell detection method using complement-mediated cytolytic reaction and imaging sensor system

A novel tumor-detection system consisting of complementmediated cytolytic reaction and an image processing system was developed for the simple and rapid determination of tumor cells. The present system consists of a CCD image sensor, image memory board, personal computer, and microscope. When monoclonal antibody 3C4, which is specific to the guinea pig hepatoma L-10, was added to cell suspension, only L-10 cytolysis occurred. Cytolysis caused a decrease in brightness of the cells observed by phase-contrast microscopy. The phase contrast image of the cells before cytolysis was converted to a digitalized signal and stored in computer memory. After cytolysis, a brightness threshold above that of lysed cells was subtracted from the digitalized signal and compared to the signal stored before reaction. L-10 cells in mixed cell suspension were determined specifically by the system. Measurement time was only 2 sec and overall time, including reaction time, was approximately 30 min. Since this method does not require a cell washing process, automation of the whole system is possible.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions

In a nickel titration of cyanide ions using murexide as indicator, an accurate equivalence point was determined by a non-linear least-squares curve-fitting for a titration curve. This method was developed to establish a standard solution for cyanide ions. In a curve-fitting procedure, a theoretical titration curve was calculated, assuming that nickel ion formed only a 1:4 Ni²⁺:CN⁻ complex with cyanide ions and formed only a 1:1 complex with murexide. Results of the curve-fitting were reasonable at any pH and any indicator concentration studied. The combined standard uncertainty for a concentration of a 1000 mg kg⁻¹ cyanide solution by this method was 0.079%.     

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

Seven-membered vibsane-type diterpenes with a 5,10-cis relationship from Viburnum awabuki

New five seven-membered vibsane-type diterpenes named 5-epi-vibsanin C, 5-epi-vibsanin H, 5-epi-vibsanin K, 18-O-methyl-5-epi-vibsanin K and 5-epi-vibsanin E have been isolated from the leaves of Viburnum awabuki (Caplifoliaceae). Their structures have been elucidated by analyses of spectroscopic data and comparison of their spectral data with those of the previously known seven-membered vibsane-type diterpenes. The occurrence of these seven-membered vibsane-type diterpenes with a cis relationship on the C-5 and C-10 positions in nature have been predicted by conformational analysis of vibsanin B, an eleven-membered vibsane-type diterpene. Vibsanin C, 5-epi-vibsanin C and 5-epi-vibsanin H exhibited moderate cytotoxic activities on KB cells.     

Vinyl Polymerization. 436. Effect of Magnetic Field on Uncatalyzed Polymerization

The radical polymerization of vinyl monomers initiated with several kinds of hydrophilic macromolecule was carried out in a magnetic field. The magnetic field promoted the polymerization; the conversion of monomers and the molecular weight of the polymers obtained increased with increasing field strength in the range of 0–0.1 T. The dependence of the composition and tacticity of the mother polymer on the magnitude of the magnetic field was studied. Using graft or block copolymers, which consisted of hard and soft segments, the effect of a magnetic field was further investigated. The degree of hardness and tightness of the hydrophobic areas (reaction areas) formed by the mother polymer in the aqueous solution was found to affect the magnetic field effect on the uncatalyzed polymerization. The overall activation energy obtained in the magnetic field was almost equal to that obtained without a magnetic field.     

Chemoselectivity Control: Gold(I)‐Catalyzed Synthesis of 6,7‐Dihydrobenzofuran‐4(5H)‐ones and Benzofurans from 1‐(Alkynyl)‐7‐oxabicyclo[4.1.0]heptan‐2‐ones

New and chemoselective gold(I)‐catalyzed transformations of 1‐(arylethynyl)‐7‐oxabicyclo[4.1.0]‐ heptan‐2‐ones were developed. Two completely different products—6,7‐dihydrobenzofuran‐4(5H)‐ones and benzofurans—could be obtained from the same starting material. The selectivity is determined by the ligand of the gold catalyst: triphenylphosphine delivers 6,7‐dihydrobenzofuran‐4(5H)‐ones, and 1,3‐bis(diisopropylphenyl)imidazol‐2‐ylidene leads to benzofurans. Eleven examples of each case are provided. The mechanistic suggestions for the pathways to both product types are supported by isotope labeling experiments.     

Dual Gold Catalysis: σ,π‐Propyne Acetylide and Hydroxyl‐Bridged Digold Complexes as Easy‐To‐Prepare and Easy‐To‐Handle Precatalysts

A series of dinuclear gold σ,π‐propyne acetylide complexes were prepared and tested for their catalytic ability in dual gold catalysis that was based on the reaction of an electrophilic π‐complex of gold with a gold acetylide. The air‐stable and storable catalysts can be isolated as silver‐free catalysts in their activated form. These dual catalysts allow a fast initiation phase for the dual catalytic cycles without the need for additional additives for acetylide formation. Because propyne serves as a throw‐away ligand, no traces of the precatalyst are generated. Based on the fast initiation process, side products are minimized and reaction rates are higher for these catalysts. A series of test reactions were used to demonstrate the general applicability of these catalysts. Lower catalyst loadings, faster reaction rates, and better selectivity, combined with the practicability of these catalysts, make them ideal catalysts for dual gold catalysis.     

Incorporation of β-Alanine in Cu(II) ATCUN Peptide Complexes Increases ROS Levels,DNA Cleavage and Antiproliferative Activity**

Redox-active Cu(II) complexes are able to form reactive oxygen species (ROS) in the presence of oxygen and reducing agents. Recently, Faller et al. reported that ROS generation by Cu(II) ATCUN complexes is not as high as assumed for decades. High complex stability results in silencing of the Cu(II)/Cu(I) redox cycle and therefore leads to low ROS generation. In this work, we demonstrate that an exchange of the α-amino acid Gly with the β-amino acid β-Ala at position 2 (Gly2→β-Ala2) of the ATCUN motif reinstates ROS production (^•OH and H₂O₂). Potentiometry, cyclic voltammetry, EPR spectroscopy and DFT simulations were utilized to explain the increased ROS generation of these β-Ala2-containing ATCUN complexes. We also observed enhanced oxidative cleavage activity towards plasmid DNA for β-Ala2 compared to the Gly2 complexes. Modifications with positively charged Lys residues increased the DNA affinity through electrostatic interactions as determined by UV/VIS, fluorescence, and CD spectroscopy, and consequently led to a further increase in nuclease activity. A similar trend was observed regarding the cytotoxic activity of the complexes against several human cancer cell lines where β-Ala2 peptide complexes had lower IC₅₀ values compared to Gly2. The higher cytotoxicity could be attributed to an increased cellular uptake as determined by ICP-MS measurements.     

Effect of Interventions for Improving Lumbar Motor Control on Low Back Pain in Sedentary Office Workers: A Randomized Controlled Trials

Objective: To clarify the effect of intervention with dynamic motor control exercise (DMCE) for the lumbar region on low back pain in sedentary office workers (SOWs). Methods: The participants comprised 32 SOWs with low back pain who were randomly categorized into two groups: the DMCE group and the normal trunk exercise (NTE) group. Both groups performed each exercise for three days per week for 8 weeks. The primary endpoints were evaluated for the lumbar and hip flexion angles during trunk forward bending, effect of low back pain on activities of daily living (using the Oswestry Disability Index), and intensity of low back pain (using the Visual Analog Scale) pre- and post-intervention. The extent of changes was calculated by subtracting the pre-intervention value from the post-intervention value and was compared between the two groups using an unpaired t-test. Results: The extent of changes in the lumbar flexion and hip flexion angles at 10° of trunk forward bending were significantly greater in the DMCE group than in the NTE group, and no significant differences were noted between the two groups at other angles of trunk forward bending. The extent of changes in the Oswestry Disability Index and the Visual Analog Scale scores were significantly greater in the DMCE group than in the NTE group. Conclusion: DMCE is effective in improving motor control in the lumbar region and hip joints, thereby ameliorating low back pain in SOWs.