Chiral Interlocked Corrole Dimers Directly Linked at Inner Carbon Atoms of Confused Pyrrole Rings

A facile synthetic strategy towards conformationally stable chiral chromophores based on dimeric porphyrinoids has been established. A peculiar class of face-to-face intramolecularly interlocked corrole dimers were formed by the oxidative C−C coupling linked at the inner carbon sites upon simple treatment of copper(II) ions. Their intrinsic electronic structures were modulated by the peripheral corrole ring annulations, which lead to distinct optical properties and redox profiles. The stereogenic carbon centers implemented in the confused corrole skeleton provided a rationale for designing novel chiral materials.     

Oxygen isotope effect of superconducting (Nd1−xCex)2CuO4−δ system

The effect of oxygen isotope substitution on the transition temperature T_c of a superconducting (Nd_1−xCe_x)₂CuO_4−δ system was studied, where the special synthetic method was taken to minimize ambiguous factors on the oxygen concentration and to guarantee the complete substitution of ¹⁶O by ¹⁸O. The isotope exponent in the relationship of T_c∝1/M was estimated to be less than 0.15 by magnetic susceptibility measurements.     

Trinucleon cluster structure at high-excitation energies in A=6 nuclei

Trinucleon molecular structures in ⁶He and ⁶Be were investigated by using the ⁶Li(⁷Li, ⁷Be)⁶He reaction at 455 MeV and ⁶Li(³He, t)⁶Be reaction at 450 MeV, respectively. Binary decays into t + t from a broad state at E _x =18.0±1.0 MeV in ⁶He and into ³He + ³He from one at E _x =18.0±1.2 MeV in ⁶Be, respectively, were observed by measuring trinucleon cluster decays in coincidence with reaction particles. The branching ratios for binary decay were estimated to be about 0.7 for ⁶He and ⁶Be. These large branching ratios show that a trinucleon cluster state exists as an isobaric partner around E _x =18 MeV in ⁶He and ⁶Be.     

Structural developments in synthetic rubbers during uniaxial deformation by in situ synchrotron X‐ray diffraction

The molecular orientation and strain‐induced crystallization of synthetic rubbers—polyisoprene rubber, polybutadiene rubber, and butyl rubber [poly(isobutylene isoprene)]—during uniaxial deformation were studied with in situ synchrotron wide‐angle X‐ray diffraction. The high intensity of the synchrotron X‐rays and the new data analysis method made it possible to estimate the mass fractions of the strain‐induced crystals and amorphous chain segments in both the oriented and unoriented states. Contrary to the conventional concept, the majority of the molecules (50–75%) remained in an unoriented amorphous state at high strains. Each synthetic rubber showed a different behavior of strain‐induced crystallization and molecular orientation during extension and retraction. Our results confirmed the occurence of strain‐induced networks in the synthetic rubbers due to the inhomogeneity of the crosslink distribution. The strain‐induced networks containing microfibrillar crystals and oriented amorphous tie chains were responsible for the ultimate mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 956–964, 2004     

Simultaneous determination of serotonin and 5-hydroxyindole-3-acetic acid in human urine by automated precolumn derivatization and semi-microbore column liquid chromatography with fluorescence detection.

An improved high-performance liquid-chromatographic (HPLC) assay for the simultaneous determination of serotonin (5-HT) and 5-hydroxyindole-3-acetic acid (5-HIAA) in human urine is reported. Following the automated precolumn derivatization of urinary 5-HT and 5-HIAA with benzylamine, the derivatives are separated by isocratic elution on a reversed-phase C18 semi-microbore column, and are fluorometrically detected at an excitation wavelength of 345 nm and an emission wavelength of 480 nm. The detection limits of 5-HT and 5-HIAA are 7 and 5 nmol/l in urine (0.7 and 0.5 fmol/20-microl injection). The proposed automatic method permits a highly selective and sensitive determination of 5-HT and 5-HIAA in human urine without any sample purification.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

High-quality hydroxyapatite coating on biocompatible materials by laser-assisted laser ablation method

A new method for high-quality hydroxyapatite (HAp) coating is developed, the laser-assisted laser ablation method. In this method, two lasers are used. One is used for ablation of a HAp target. The other, the assist laser, is used to irradiate a Ti substrate surface. The effects of the assist laser irradiation are to anneal the HAp coating and to improve its adhesive strength to the Ti substrate. The quality of the HAp coating depends on the delay time of the assist-laser irradiation. HAp coatings obtained at a delay time of 10 microseconds or more are more amorphous. It was confirmed that the amorphous part of a coating dissolves in simulated body fluid, while the crystalline part does not. The value of the Ca/P ratio in a coating obtained at a delay time of a few microseconds is close to the stoichiometric value. PACS 81.16.Mk     

Keratinized epithelial transport of beta-blocking agents. I. Relationship between physicochemical properties of drugs and the flux across rat skin and hamster cheek pouch.

The maximum fluxes (Jmax) of beta-blockers through keratinized membranes were determined in vitro and compared with their physiochemical parameters such as lipophilicity (log k'0) and melting point (mp). Rat abdominal skin and hamster cheek pouch mucosa were used as the model membranes. Propranolol, metoprolol, timolol, pindolol, nadolol and agenolol were used as beta-blockers with a variety of physicochemical characters. Linear relations of Jmax with either log k'0 or mp were observed both in intact rat skin and in intact hamster cheek pouch, suggesting that the lipophilicity and thermodynamic activity of a drug in the crystal state primarily affect the drug's permeation through these membranes. However, the slope, dJmax/d(log k'0), for cheek pouch mucosa was greater than that for rat skin, corresponding to the lack of appendigeal shunt pathways in cheek pouch. Penetration studies using the delipidized membranes and the isolated stratum corneum sheet of hamster cheek pouch mucosa clarified that the primary rate-limiting barrier function might exist in the lipid layer of the stratum corneum. Jmax values for the tape-stripped and delipidized skins correlated with both the solubilities of drugs in the vehicle and with the mp, suggesting the polar porous characteristics of both model membranes. However, a theoretical approach confirmed that the contribution of an intracellular or aqueous pore route in the intact membrane to the permeation of drugs with positive lipophilic indexes is negligible.     

Determination of midodrine in human plasma by high-performance liquid chromatography with fluorescence detection.

A simple and sensitive fluorometric high-performance liquid chromatographic method was developed for the determination of midodrine in human plasma. After liquid-liquid extraction from plasma, the drug and 2-phenylglycinol (internal standard) were convened into the corresponding fluorescent derivatives by reaction with 3,4-dihydro-6,7-dimethoxy-4-methyl-3-oxoquinoxaline-2-carbonyl chloride, a fluorescence derivatization reagent for amines. The derivatives were separated within 30 min on a reversed-phase column using isocratic elution with acetonitrile-methanol-water (10:30:60, v/v) and were detected spectrofluorometrically at 485 nm with excitation at 400 nm. The detection limit for midodrine was 0.3 pmol (76 pg) per mL plasma at a signal-to-noise ratio of 3.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.