Room-Temperature,Metal-Free,and One-Pot Preparation of 2H-Indazoles through a Mills Reaction and Cyclization Sequence

The Mills reaction and cyclization of readily available 2-aminobenzyl alcohols and nitrosobenzenes using thionyl bromide provided 2H-indazoles in up to 88 % yields. In the metal-free process, acetic acid played a crucial role for the both Mills reaction and cyclization. A brominated 2H-indazole could also be obtained through the one-pot sequence.     

Non-destructive rapid analysis of brominated flame retardants in electrical and electronic equipment using Raman spectroscopy.

Using Raman spectroscopy without any preparation, we analyzed the brominated flame retardant, polybromodiphenyl ethers (PBDEs), which has been prohibited by the European Union. The typical Raman bands of PBDEs, which are clearly different from those of other brominated flame retardants, are from 100 to 300 cm(-1). In our analysis, the detection limit was about 100 ppm, and the analysis took about 1 min, whereas the usual method of solvent extraction using gas chromatography/mass spectroscopy takes 50 h.     

Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

Temporal analysis of products (TAP) study on oxygen storage properties over Pt−Rh/CeO2 catalyst

The oxygen storage capacity of CeO₂, Ce_0.9Pr_0.1O₂, Pt?Rh/CeO₂ and Pt?Rh/Ce_0.9Pr_0.1O₂ was investigated by conventional GC pulse method and transient pulse techniques. It is shown that incorporation of PrO_y into CeO₂ matrix strongly promotes oxygen storage capacity (OSC) measured using the transient pulse technique. The improvement of OSC at low temperature is observed in Pt?Rh loaded onto CeO₂ and Ce?Pr catalysts.     

Two-mass models of the vocal cords for natural sounding voice synthesis

Three new two-mass models of the vocal cords are treated. First, the features, structure, and differential equations of motion are described for each of the new models and compared with those of previous models. Second, performances of the models are discussed in terms of glottal volume flow, glottal area, radiated sound pressure, trajectories of mass movement, running spectra of the output sound pressure, and perceptual naturalness of the output sound. Finally, the major effects of glottal source-vocal tract interaction including skewing, truncation, and superposition are investigated, using one of the simplest types of two-mass models and two types of load representing the vocal tract.     

A compact optical heterodyne interferometer by optical integration and its application

A compact high-resolution optical heterodyne interferometer combining a two-frequency light module and a minute optical system is described. The light module, which generates two independent frequencies of light, is fabricated by proton exchange method on LiNbO₃ substrate. We report an experiment evaluating measurement accuracy using a micro-displacement measurement system which incorporates this interferometer. Results of the experiment with a standard thickness sample show high thermal stability with maximum measurement error of 1.8 nm at a temperature from 19°C to 33°C. The system was used to measure the hysteresis of a piezoelectric element for displacements of several nm, thereby making it possible to analyze the system quantitatively in practice.     

Spherical dye-doped silica particles

Organic dyes such as water soluble porphyrins were incorporated into monodispersed SiO₂ particles using the sol-gel technique (the Stober synthesis) and their monomeric and dimeric properties were investigated by aiming at the microcavity effect. Doping efficiencies of dyes into SiO₂ particles depended on dye's hydrophilic properties. The doping efficiency of a porphyrin, TTMAPP, decreased with increasing the nominal content in the starting solution and the doping content showed the maximum value of 1.6×10^–5 mol/g SiO₂. With increasing the TTMAPP content, spectra of doped particles were changed from dimeric to monomeric nature; the absorption peak due to dimers disappeared and halfwidth of absorption at Soret band decreased. This unusual change was caused by the decrease of particle sizes by dye doping. The TTMAPP-doped sample having monomeric spectrum showed the fluorescence life time of 8.5 nsec and photochemical hole burning at about 5 K.     

The C-N Stretching Vibronic Bands of the MgNC ÃΠ-X?Σ Transition

We have generated MgNC in supersonic free jet expansions and measured the laser-induced fluorescence excitation spectra of the C-N stretching vibronic bands of the òΠ-X?²Σ⁺ transition. Rotational analysis yields the molecular constants of the vibronic levels, (1,0,0) and (1,0,1), in the Ã²Π state. We cannot find any anomalies in the constants of these vibronic levels, while they are predicted to lie above the barrier of the isomerization reaction pathway, MgNC↔MgCN, on the Ã²Π state. On the basis of the molecular constants obtained, we discuss the fine structures of both the ground X?²Σ⁺ and excited Ã²Π states.     

Bis(pentafluorophenyl) disulfide as a hydrogen abstractor and an electron acceptor from the resulting radical intermediate

The pentafluorobenzenethiyl radical is an efficient hydrogen abstractor from an activated methylene or methine group and bis(pentafluorophenyl) disulfide is an efficient electron acceptor from the resulting radical intermediate. Thus benzyl-OTBS ether was easily converted into the corresponding pinacol, and 2-phenyl-1,3-dioxanes are converted into the monobenzoates of diols.     

Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.