Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

Interfacial adsorption state of protonated lipophilic porphyrins in a liquid-liquid system by using reflection spectrometry.

Analysis by reflection spectrometry was performed to clarify the interfacial adsorption of protonated lipophilic tetraphenylporphyrin derivatives in a dodecane-aqueous sulfuric acid system, and to confirm the utility of partial reflection spectroscopy. Interfacial adsorption was not observed for porphyrins substituted at the 2,6 positions of meso-phenyl groups, suggesting that the substituents prevent porphyrins from forming aggregates by steric hindrance. Polymorphous J-aggregates of acid dications were produced by tetra-p-tolylporphyrin with a saturated interfacial molecular density of 1.0 x 10(-10) mol cm(-2), which could yield 48 degrees as a mean tilting angle of the pyrrole ring plane from the interface normal. Partial-reflection spectrometry can provide sensitive detection and molecular orientation analysis of interfacial adsorbates.     

Visible-light-sensitive photocatalytic reaction on chromium-containing mesoporous silica: selective partial oxidation of propane with molecular oxygen

The photocatalytic reactivities of chromium-containing mesoporous silica molecular sieves (Cr-HMS) under visible light irradiation have been investigated. Cr-HMS involves tetrahedral chromium oxide (Cr-oxide) moieties which are highly dispersed and incorporated in the framework of molecular sieve with two terminal Cr=O groups. In the presence of propane with molecular oxygen, a partial oxidation proceeded under visible light irradiation to produce acetone and acrolein, with high selectivity, while a complete oxidation proceeded under UV light irradiation mainly to produce CO₂. The charge-transfer excited state of the tetrahedral Cr-oxide moieties plays a significant role in the photocatalytic reactions.     

On Modular Forms Arising from a Differential Equation of Hypergeometric Type

Modular and quasimodular solutions of a specific second order differential equation in the upper-half plane, which originates from a study of supersingular j-invariants in the first author's work with Don Zagier, are given explicitly. Positivity of Fourier coefficients of some of the solutions as well as a characterization of the differential equation are also discussed.     

A globally convergent Newton method for solving strongly monotone variational inequalities

Variational inequality problems have been used to formulate and study equilibrium problems, which arise in many fields including economics, operations research and regional sciences. For solving variational inequality problems, various iterative methods such as projection methods and the nonlinear Jacobi method have been developed. These methods are convergent to a solution under certain conditions, but their rates of convergence are typically linear. In this paper we propose to modify the Newton method for variational inequality problems by using a certain differentiable merit function to determine a suitable step length. The purpose of introducing this merit function is to provide some measure of the discrepancy between the solution and the current iterate. It is then shown that, under the strong monotonicity assumption, the method is globally convergent and, under some additional assumptions, the rate of convergence is quadratic. Limited computational experience indicates the high efficiency of the proposed method.     

An optimal design of collateralized mortgage obligation with PAC-companion structure using dynamic cash reserve

This paper presents a model for optimally designing a collateralized mortgage obligation (CMO) with a planned amortization class (PAC)-companion structure using dynamic cash reserve. In this structure, the mortgage pool’s cash flow is allocated by rule to the two bond classes such that PAC bondholders receive substantial prepayment protection, that protection being provided by the companion bondholders. The structure we propose provides greater protection to the PAC bondholders than current structures during periods of rising interest rates when this class of bondholders faces greater extension risk. We do so by allowing a portion of the cash flow from the collateral to be reserved to meet the PAC’s scheduled cash flow in subsequent periods. The greater protection is provided by the companion bondholders exposure to interest loss. To tackle this problem, we transform the problem of designing the optimal PAC-companion structure into a standard stochastic linear programming problem which can be solved efficiently. Moreover, we present an extended model by considering the quality of the companion bond and by relaxing the PAC bondholder shortfall constraint. Based on numerical experiments through Monte Carlo simulation, we show the utility of the proposed model.     

Different acute effects of oral and intratracheal administration of disodium arsenate and gallium arsenide on heme synthesis in rats

The acute influences of arsenic compounds on the metabolism of porphyrins and heme in various organs of rats after oral or intratracheal administration of disodium arsenate (Na₂HAsO₄) and gallium arsenide (GaAs) were examined and compared. For the oral administration experiments, 21 or 84 mg of Na₂HAsO₄, or 2 or 4 g of GaAs, per cm³ saline per kg body weight of each animal was administered to Jcl: Wistar male rats and the organs were removed after exsanguination from the vein of the right axilla under anesthesia with ether, 16 h after administration. In the case of intratracheal administration, rats given 8.2 or 16.4 mg of Na₂HAsO₄, or 0.2 or 0.4 g GaAs per cm³ saline per kg body weight were examined under the same experimental conditions as for the administration route. Increase in the body weight of rats was suppressed after intratracheal administration of the two arsenic compounds. In these rats the hematocrit value increased significantly. These changes were not shown by the orally administered rats. Elevation in δ-aminolevulinate synthase (ALA-S, EC 2.3.1.37) activity in erythroblasts by Na₂HAsO₄ was much higher after intratracheal administration than after oral administration. Suppression in the activities of δ-aminolevulinate dehydratase (ALA-D, EC 4.2.1.24) and porphobilinogen deaminase (PBG-D, EC 4.3.1.8) in peripheral erythrocytes by Na₂HAsO₄ and GaAs were stronger by intratracheal administration than by the oral route. Influences of GaAs on the activity of PBG-D in rat liver were shown to be more effective by oral administration than by the intratracheal route. Oral administration of Na₂HAsO₄ and GaAs had a stronger suppression effect on the activities of ALA-D and PBG-D in rat kidney. It seems from these results that the different extents of the influence of arsenic compounds might depend on the routes of intake.     

Hydrogel‐like elastic membrane consisting of semi‐interpenetrating polymer networks based on a phosphorylcholine polymer and a segmented polyurethane

To obtain a hydrogel‐like elastic membrane, we prepared semi‐interpenetrating polymer networks (IPNs) by the radical polymerization of methacrylates such as 2‐methacryloyloxyethyl phosphorylcholine (MPC), 2‐hydroxyethylmethacrylate, and triethyleneglycol dimethacrylate diffused into segmented polyurethane (SPU) membranes swollen with a monomer mixture. The values of Young's modulus for the hydrated semi‐IPN membranes were less than that for an SPU membrane because of higher hydration, but they were much higher than that for a hydrated MPC polymer gel (non‐SPU). According to a thermal analysis, the MPC polymer influenced the segment association of SPU. The diffusion coefficient of 8‐anilino‐1‐naphthalenesulfonic acid sodium salt from the semi‐IPN membrane could be controlled with different MPC unit concentrations in the membrane, and it was about 7 × 10² times higher than that of the SPU membrane. Fibroblast cell adhesion on the semi‐IPN membrane was effectively reduced by the MPC units. We concluded that semi‐IPNs composed of the MPC polymer and SPU may be novel polymer materials possessing attractive mechanical, diffusive‐release, and nonbiofouling properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 68–75, 2003     

Influence of the network chain orientation on the fracture toughness of a mesogenic epoxy resin modified with CTBN

A biphenol‐type epoxy resin, which had a mesogenic group in the backbone moiety, was modified with carboxy‐terminated butadiene acrylonitrile copolymer (CTBN) as a reactive elastomer, and its fracture toughness was measured. With the addition of CTBN, the fracture toughness of the biphenol‐type epoxy resin significantly increased and became significantly higher than that of a bisphenol A‐type epoxy resin modified with CTBN. The network chain orientation in the cured biphenol‐type epoxy resin system was clearly observed during the fracture process with polarized microscopy Fourier transform infrared measurements, although such a phenomenon was not observed in the bisphenol A‐type epoxy resin system. The high toughness of the cured biphenol‐type system was clearly due to the consumption of the mechanical energy by a large deformation of the matrix resin due to the orientation of the network chains during the fracture process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1198–1209, 2003     

Crystal structure of the clathrate of 5,12-dihydro-5,12-o-benzenonaphthacene-1,4-dione with benzene (2:1).

In the crystal of the title compound, the quinone fragment of the host (1) participates in weak D-A interactions with a neighboring naphthalene moiety of 1 and with the guest molecule via fairly short intermolecular face-to-face contacts. An intermolecular electrostatic interaction between a quinone-oxygen atom and a neighboring quinone ring is suggested by short O...C contacts. There exist several C-H...O hydrogen bonds, one of which seems to contribute to the formation of a centrosymmetric dimer of 1.