Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007     

New poly(butylene succinate)/layered silicate nanocomposites. II. Effect of organically modified layered silicates on structure,properties, melt rheology,and biodegradability

A series of new poly(butylene succinate) (PBS)/layered silicate nanocomposites were prepared successfully by simple melt extrusion of PBS and organically modified layered silicates (OMLS). Three different types of OMLS were used for the preparation of nanocomposites: two functionalized ammonium salts modified montmorillonite and a phosphonium salt modified saponite. The structure of the nanocomposites in the nanometer scale was characterized with wide-angle X-ray diffraction and transmission electron microscopic observations. With three different types of layered silicates modified with three different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, materials properties, melt rheological behavior, and biodegradability. Interestingly, all these nanocomposites exhibited concurrent improvements of material properties when compared with pure PBS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3160–3172, 2003     

Characterization and determination of linear alkylbenzenesulfonates in environmental water samples by high-performance liquid chromatography with a hydrophilic polymer column and electrospray ionization mass spectrometric detection.

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.     

Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

Chlorodimethylaluminum-promoted nucleophilic addition of lithium pentamethylcyclopentadienide to aliphatic aldehydes and DDQ-mediated carbon-carbon bond cleavage of the adducts providing the parent aldehydes

Treatment of aliphatic aldehyde with lithium pentamethylcyclopentadienide in the presence of chlorodimethylaluminum provided the corresponding carbinol in excellent yield. The carbinol returns to the parent aldehyde and pentamethylcyclopentadiene by the action of a catalytic amount of 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ).     

Atomic absorption spectrometry of traces of tri- and hexavalent chromium

Summary Atomic absorption spectrometry combined with extraction is described for the determination of tri- and hexavalent chromium. The chromium diethyldithiocarbamate chelate was used for chromium (VI), whereas hydroxyquinolate or thenoyltrifluoroacetonate chelate for chromium(III). The method is rapid and precise.

---

Zusammenfassung Extraktion und darauffolgende Messung der Atomarabsorption wurden zur Bestimmung von drei- und sechswertigem Chrom verwendet. Die Chelatverbindung mit Diäthyldithiocarbamat wurde für Chrom(VI), der Chelatkomplex mit Hydroxychinolin oder Thenoyltrifluoraceton für Chrom(III) verwendet. Das Verfahren ist rasch und genau.

     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Polyoxymethylene prepared by γ-ray-induced polymerization of tetraoxymethylene single crystal

Summary In order to prepare a large single crystal, tetraoxymethylene recrystallized by distilled water adjusted to pH 8 was sealed in an ampoule at a reduced pressure of 1 mm Hg and was crystallized in a furnace with the temperature gradient of 6 °C/cm. The lowering rate of the ampoule was required to be 6 cm/day for preparing the single crystal with 1 cm diameter and to be 3 cm/day for one with 2 cm diameter. The optimum angle at the pointing end of the ampoule, where a seed crystal is formed, was about 40°. The b-axis of the obtained single crystal was parallel to the direction of the crystal growth i. e. the wall of the ampoule. It was polymerized byγ-ray under conditions which prevent the growth of the twin crystal. The obtained polyoxymethylene was porous, because the polymerization yield of 100% could not be attained. However, it was so tough that a specimen for measurements could be cut down by a diamond cutter. Its fiber axis was parallel to the direction of the wall of the ampoule. It did not contain the so-called amorphous regions, although it did contain defects. It was characterized with the extremely high orientation of the polymer chains.

---

Zusammenfassung Zur Pr?parierung gro?er Einkristalle wurde rekristallisiertes Tetraoxymethylen in destilliertem Wasser von p_H 8 in eine Ampulle bei einem reduzierten Quecksilberdruck von 1 mm eingefüllt und in einem Ofen mit einem Temperaturgradienten von 6 °C/cm kristallisiert. Die Abkühlgeschwindigkeit der Ampulle betrug etwa 6 cm/Tag für die Pr?paration eines Einkristalls mit 1 cm ? und 3 cm/Tag für einen solchen mit 2 cm ?. Der optimale Winkel am spitzen Ende der Ampulle, wo der Keimkristall gebildet wird, betrug etwa 40°. Dieb-Achse des Einkristalls war parallel zur Wachstumsrichtung, d. h. zur Wand der Ampulle. Der Kristall wurde durch R?ntgenstrahlen polymerisiert unter Bedingungen, die das Wachsen eines Zwillingskristalls vermeiden. Das erhaltene Polyoxymethylen war por?s, doch konnte eine Polymerisationsausbeute von 100% nicht erhalten werden. Doch war der Einkristall so z?h, da? für Messungen eine Probe mit dem Diamantschneider abgeschnitten werden konnte. Die Faserachse war parallel zur Wandrichtung der Ampulle. Das kristalline Material enthielt keine sogenannten amorphen Bereiche, allerdings Defekte. Es war durch extrem hohe Orientierungen der Polymerketten charakterisiert.

---

---

We are greatly indebted to Dr.Y. Miyake of Mitsui Toatsu Co., Ltd. for providing the tetraoxymethylene. Thanks are to due Dr.M. Nishii of Osaka Laboratories, Japan Association for Radiation Research on Polymer for the radiation polymerization, to Mr.T. Tsukihara for the X-ray measurement, and to Mrs.H. Tanaka for the help with the electron microscopy. We are also grateful to Prof.S. Seki for offering the use of differential scanning calorimeter.     

Muon spin relaxation studies of magnetic-field-induced effects in high-Tc superconductors

Muon spin relaxation measurements in high transverse magnetic fields [FORMULA: SEE TEXT] revealed strong field-induced quasistatic magnetism in the underdoped and Eu-doped (La,Sr)2CuO4 and La1.875Ba0.125CuO4, existing well above Tc and TN. The susceptibility counterpart of Cu spin polarization, derived from the muon spin relaxation rate, exhibits a divergent behavior towards T approximately 25 K. No field-induced magnetism was detected in overdoped La1.81Sr0.19CuO4, optimally doped Bi2212, and Zn-doped YBa2Cu3O7.