Anisotropic friction model of DNA electrophoresis in polymer solutions: Comparison with direct observations

The electrophoresis of DNA chains in uncrosslinked polymer solutions with a Brownian dynamics simulation with an anisotropic friction tensor was analyzed. According to the degree of anisotropy, three types of migration behavior are obtained: fluctuation without or with periodicity between U‐shaped and compact conformations, or migration with linear conformation. We found good agreement between our simulation results and the direct observations of DNA by fluorescence microscopy. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1316–1322, 2003     

Tetrakis-acridinyl peptide: a novel fluorometric reagent for nucleic acid analysis based on the fluorescence dequenching upon DNA binding

Tetrakis-acridinyl peptide 1 assuming a right-handed helical stacked conformation of the acridinyl units can bind to DNA duplex with a very high affinity of 10(8) (M-bp)(-1) even at a high salt concentration of 0.2 M NaCl, irrespective of the base composition. Peptide 1 gave rise to 1600-times enhancement of its fluorescence upon binding to an AT polymer due to the collapse of this stacked structure, but the fluorescence is not enhanced with a GC polymer, though the binding constants of 1 for both polymers were the same.     

Cross-metathesis of vinyl aromatic heterocycles with 1-octene in the presence of a Schrock catalyst

Metathesis of 2-vinyl aromatic heterocycles such as furan, thiophene, pyrrole and pyridine in the presence of a molybdenum-based Schrock catalyst has been investigated from a synthetic point of view. The self-metathesis of 2-vinyl aromatic heterocycles was not successful. However, in cross-metathesis of thiophene, furan and styrene with 1-octene, the cross-metathesis product, heterodimer, was readily obtained selectively, together with only small amounts of the two corresponding self-metathesis products. The origin of the surprisingly high selectivity of heterodimer formation was elucidated through metallacyclobutane intermediate mechanism, observations of carbenes by in situ ¹H NMR, and reaction products.     

Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

A catalytic chemical vapor deposition synthesis of double-walled carbon nanotubes over metal catalysts supported on a mesoporous material

Double-walled carbon nanotubes (DWNTs) have been synthesized by catalytic chemical vapor deposition (CCVD) over supported metal catalysts decomposed from Fe(CH₃COO)₂ and Co(CH₃COO)₂ on mesoporous silica. Bundles of tubes with relatively high percentage of DWNTs, in areas where tubular layered structures could be clearly resolved, have been observed by transmission electron microscopy (TEM). In other areas, crystal-like alignment of very uniform DWNTs was observed for the first time, suggesting that mesoporous silica might play a templating role in guiding the initial nanotube growth. In addition, compatible with nano-electronics research, bridging of catalytic islands by DWNTs has also been demonstrated.     

Novel one-dimensional tubelike and two-dimensional polycatenated metal-organic frameworks

Two novel metal-organic frameworks (MOFs) [Zn(TITMB)(OAc)](OH).8.5H(2)O (1) and [Ag(TITMB)N(3)].H(2)O (2) [TITMB = 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, OAc = acetate anion] were synthesized and their structures were determined by X-ray crystallography. Complex 1 crystallizes in tetragonal space group P(-)4 with a = 23.2664(7) and c = 11.9890(3) A and Z = 8. 1 has a one-dimensional tubelike structure with large inner pore size of approximately 17 A. Complex 2 crystallizes in monoclinic space group C2 with a = 20.7193(10), b = 11.5677(8), and c = 12.2944(6) A, beta = 125.5770(10) degrees, and Z = 4. 2 consists of two-dimensional honeycomb networks that interpenetrate each other to generate a polycatenated structure. In these two complexes, both zinc(II) and silver(I) atoms are four-coordinated with the same tetrahedral coordination geometry. The topologies of 1 and 2 are predominated by the conformations of TITMB, which are cis, trans, trans in 1 and cis, cis, cis in 2, respectively.     

A novel synthesis of substituted quinolines using ring-closing metathesis (RCM): its application to the synthesis of key intermediates for anti-malarial agents

A method for synthesizing substituted quinolines using ruthenium-catalyzed ring-closing metathesis as a key step has been developed. Substituted 1,2-dihydroquinolines, 4-silyloxy-1,2-dihydroquinoline and 4-methoxy-1,2-dihydroquinoline, were successfully synthesized in excellent yields via ene-ene metathesis and silyl or alkyl enol ether-ene metathesis, respectively. The synthetic intermediates of the antimalarial agents quinine, chloroquine, and PPMP-quinine hybrid were efficiently synthesized by this methodology.     

Recognition of chiral catechols using oxo-titanium phthalocyanine

Oxo-titanium phthalocyanine (TiOPc) derivatives of catechin and hematoxylin (natural ortho-diol type chiral compounds) have been prepared and characterized by spectral and chromatographic techniques. It is demonstrated that the TiOPc unit is an excellent template for chiral recognition through its isolated Q-transitions. The formation of a helical dimeric complex with hematoxylin induces strong CD-activity in the Q-band region. Ab initio geometry optimizations were combined with a Kuhn-Kirkwood coupled-oscillator mechanism to obtain the absolute configuration of hematoxylin. In addition, it is shown that the described chiroptical recognition method is sensitive to slight conformational changes.     

Syntheses, crystal structures and properties of novel zinc(II) complexes obtained by reactions of zinc(II) malonate with flexible multidentate ligands

Complex [Zn₂(bimb)₂(mal)₂(H₂O)₂]·4H₂O (1) (mal=⁻OCOCH₂COO⁻) was obtained by reaction of bidentate ligand 4,4′-bis(imidazole-1-ylmethyl)biphenyl (bimb) with zinc(II) salt of malonate, while the reaction of the same metal salt with 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene (titmb) gives another novel complex [Zn₂(titmb)₂(mal)][mal]·12H₂O (2). The structures of these complexes were determined by X-ray crystallography. The results revealed that 1 is a cyclic dinuclear complex in which the malonate groups act as terminators and prevent further aggregation, while 2 is a 2D honeycomb network in which each independent 2D sheet contains two sub-layers bridged by the malonate groups and complex 2 also contains free malonate as a counteranion connected to the 2D layer by C-H?O hydrogen bonds. The entirely different structure and topology of complexes 1 and 2, on the one hand, indicates that the nature of organic ligands affected the structures of assemblies greatly, and on the other, reveals the versatility of the malonate which can act as a bridging and/or blocking ligand.