Nuclear forward scattering vs. conventional Mössbauer studies of atomically tailored Eu-based materials

With the decrease in size of devices, rapid characterization of nano-devices is an inevitable necessity. It is shown that Mössbauer spectroscopy using synchrotron radiation from the advanced photon source provides such a tool of investigation. Results are presented and compared for conventional Mössbauer and Nuclear Forward Scattering for ¹⁵¹Eu-doped magnesium sulfide as an example, especially at low concentrations.     

Role of electrostatic interactions in particle adsorption

The role of the electrostatic double-layer interactions in adsorption of colloid particles at solid/liquid interface was reviewed. The phenomenological formulation of the governing PB equation was presented with the expressions for the pressure tensor enabling one to calculate forces, torques and interaction energies between particles in electrolyte solutions. Then, the limiting analytical results for an isolated double-layer (both spherical and planar) were discussed in relation to the effective surface potential concept. The range of validity of the approximate expression connecting the surface potential and the effective surface potential with surface charge for various electrolytes was estimated. The results for double-layer systems were next presented including the case of two planar double-layers and two dissimilar spherical particles. Limiting solutions for short and long distances as well as for low potentials (linear HHF model) were discussed. The approximate models for calculating interactions of spheres, i.e., the extended Derjaguin summation method and the linear superposition approach (LSA) were also introduced. The results stemming from these models were compared with the exact numerical solution obtained in bispherical coordinate system. Possibilities of describing interactions of nonspherical particles (e.g., spheroids) in terms of the Derjaguin and the equivalent sphere methods were pointed out. In further part of the review the role of these electrostatic interactions in adsorption of colloid particles was discussed. Theoretical predictions were presented enabling a quantitative determination of both the initial adsorption flux for low surface coverages and the surface blocking effects for larger surface coverages. Possibility of bilayer adsorption for dilute electrolytes was mentioned. The theoretical results concerning both the adsorption kinetics and structure formation were then confronted with experimental evidences obtained in the well-defined systems, e.g., the impinging-jet cells and the packed-bed columns of monodisperse spherical particles. The experiments proved that the initial adsorption flux was considerably increased in dilute electrolytes whereas the monolayer coverages were considerably decreased due to lateral interactions among particles. It was then concluded that the good agreement between experimental and theoretical data confirmed the thesis of an essential role of the electrostatic interactions in adsorption phenomena of colloid particles.     

Structure of colloid silica determined by viscosity measurements

The viscosity of nanosized colloid silica suspensions, used as binders in the investment casting, was determined as a function of their weight fraction reaching 52%. A new capillary viscometer was used whose construction eliminated sedimentation effects. The experiments have been carried out at fixed pH 10.0 and controlled ionic strength. It was found that for a low silica concentration range (weight fraction below 5%) the suspension viscosity increased more rapidly than the Einstein theory predicts. This anomalous behavior could not be explained in terms of the primary electroviscous effect predicted to be a few orders of magnitude smaller as observed. This discrepancy was accounted for by postulating a fuzzy, gel-like structure of colloid silicas used in our experiments. Hence, the apparent hydrodynamic radius of silica particles in aqueous suspensions was found to be larger than the primary particle size in accordance with previous observations. Based on this postulate, an apparent density of the silica sols was found to be 1.32-1.37 g/cm(3) instead of 2.2-2.32 g/cm(3) as determined from the suspension dilution method. This behavior was interpreted in terms of the core/shell model with high shell porosity, reaching 85%. Similarly, for higher concentration ranges, silica viscosity increased more rapidly with increased sol concentration than predicted by the Batchelor model derived for hard particles. The deviation was attributed to the secondary electroviscous effect stemming from the electrostatic interactions among silica particles in sheared suspensions. This effect has quantitatively been interpreted in terms of Russel's theory. On the other hand, for the high concentration range the experimental results were well accounted for by the Dougherty-Krieger model. By exploiting our experimental findings a sensitive method of determining the structure and apparent density of silica sols in aqueous media was proposed.     

Kinetics of particle deposition in the oblique impinging jet cell

A new oblique impinging-jet (OBIJ) cell was developed, suitable for colloid deposition studies at various interfaces. In contrast to previously used orthogonal cells, the OBIJ construction makes possible direct microscope observations of particle deposition on nontransparent substrates. The cell performance was tested by studying kinetics of polystyrene latex particle deposition on mica. Two limiting cell configuration were used in the experiments: (i) the lower position (inverted microscope observation of substrate surface through air) and (ii) the upper position (observation of the substrate surface with adsorbed particles through the suspension layer). The dependence of local mass transfer rate (particle flux) on the position over the substrate surface was studied for various flow Reynolds numbers. It was demonstrated that deposition rate attained maximum at the flow stagnation point whose position was dependent on Re number. Moreover, it was shown that the local flux decreased at much slower rate when moving in the downstream direction, than for previously used impinging-jet cells. Consequently, the area of uniform transport conditions was larger, enabling more precise determination of the limiting particle flux at the stagnation-point. The dependence of the flux on Re number was systematically studied for various ionic strength of the suspension. It was demonstrated, in accordance with previous results for the ordinary impinging-jet, that the flux increased significantly for low ionic strength and high Re number. This phenomenon, referred to as the inverse salt effect, was interpreted in terms of the convective diffusion theory. The governing transport equation originating from this theory was solved numerically, for the region near the stagnation point, using the finite-difference method. These numerical solutions were used for nonlinear fitting of the flow intensity parameter dependence on the Re number. In this way the flow field in the vicinity of the stagnation point was fully characterized. It was concluded that the new cell can be exploited as an effective experimental tool for colloid deposition studies on various substrates.     

Neurofibrillary tangles and plaques are not accompanied by white matter pathology in aged triple transgenic-Alzheimer disease mice

Alzheimer's disease (AD) is a progressive neurodegenerative disorder that is the most common cause of dementia in aging populations. Although senile plaques and neurofibrillary tangles are well-established hallmarks of AD, changes in cerebral white matter correlate with cognitive decline and may increase the risk of the development of dementia. We used the triple transgenic (3xTg)-AD mouse model of AD, previously used to show that white matter changes precede plaque formation, to test the hypothesis that MRI detectable changes occur in the corpus callosum, external capsule and the fornix. T₂-weighted and diffusion tensor magnetic resonance imaging and histological stains were employed to assess white matter in older (11–17 months) 3xTg-AD mice and controls. We found no statistically significant changes in white matter between 3xTg-AD mice and controls, despite well-developed neurofibrillary tangles and beta amyloid immunoreactive plaques. Myelin staining was normal in affected mice. These data suggest that the 3xTg-AD mouse model does not develop MRI detectable white matter changes at the ages we examined.     

Synthesis of Galactosylhydroxylysine and its Analogs

Synthesis of (--)-galactosylhydroxylysine (GHL, I), and its analogs (+)-2 and (+)-3, which are essential for development of assays for osteoporosis, is described starting from (2S,5R)-(+)-hydroxylysine (4).     

Stimulated by cyclodextrins high yield synthesis of azocrown analogues comprising pyrrole or imidazole residues

The influence of cyclodextrins (CDs) on the formation of azocrown ethers comprising pyrrole, imidazole and substituted imidazole has been studied. Pyrrole, imidazole, 2-methyl-, 4-methyl- and 4-phenylimidazole were coupled with bis-diazonium salts derived from bis-1,5-(2-aminophenoxy)-3-oxapentane or bis-1,8-(2-aminophenoxy)-3,6-dioxaoctane to form macrocyclic compounds with two azo units. The syntheses were performed under standard conditions in the presence of α-, β- or γ-CDs and the yield of the reaction products was compared with the results of plain experiments, i.e. without CDs. The results are discussed in terms of co-conformation of azole molecules embedded in CD cavity.

Pyrrole or imidazole or imidazole derivatives were coupled with bis-diazonium salts to form macrocycles with two azo units. The syntheses were performed under standard conditions in the presence of α-, β-, or γ-cyclodextrin and the yield of the reaction products was compared with the results of plain experiments, i.e. without CDs. The results are discussed in terms of co-conformation of azole molecules embedded in cyclodextrin cavity.     

A study on adsorption of metals by activated carbon in a large-scale (municipal) process of surface water purification

Elements that enter the aquatic environment may pose a health risk to wildlife and humans. The aims of this study were: to determine how the introduction of activated carbon for a water purification system will improve the quality of the water produced; and to investigate the sorption of metals on activated carbons, including determination of the accumulation, as well as changes in concentrations of elements in carbons. The tests were carried out on three types of activated carbons with different granular structure. All samples were collected from Water Treatment Plant Goczalkowice, Poland. Concentrations of elements were measured using an optical emission spectrometer with inductively coupled plasma. The experiment showed that metals accumulating in the activated carbons during the operation included: Ca, Mn, Zn, and Cu. In each of the three types of carbons, it can distinguish such elements as Ba, Al, Cr, Ni, Ti, which are characterized by irregular accumulation during the operation of the filter. The introduction of carbon sorbent for water treatment largely contributed to improvement in the quality of raw material supplied to customers, mainly with regard to taste and smell, as well as to reduction of basic parameters: color, absorbance in the UV range and oxidability.