Assessment of the retention properties of poly(vinyl alcohol) stationary phase for lipid class profiling in liquid chromatography

Potentialities of polymerized vinyl alcohol on silica gel were assessed for class separation of simple lipids, sphingolipids, glyceroglycolipids and phospholipids by high-performance liquid chromatography. A screening of pure solvents in binary gradient elution and a chemometric approach was used to define a rugged two segment linear gradient formed from four solvents for total lipid class separation. Triethylamine and formic acid were added in all mobile phase components for acidic phospholipid separation and evaporative light scattering response enhancement. Simple analytical procedures are described for the analysis of complex lipid materials.     

Postcolumn fluorescence as an alternative to evaporative light scattering detection for ceramide analysis with gradient elution in non-aqueous reversed-phase liquid chromatography

Ceramide analysis was developed with gradient elution in non-aqueous reversed-phase liquid chromatography with evaporative light scattering detection (ELSD) or postcolumn fluorescence detection. Fluorescence detection (excitation, 360 nm; emission, 425 nm) after postcolumn formation of mixed assemblies between eluted ceramides and 1,6-diphenyl-1,3,5-hexatriene was developed. In comparison with ELSD, fluorescence detection allows a better detection of the minor species ceramide from ceramide type III (commercial mixture of non-hydroxy fatty acid-sphingosine) and appears to be more sensitive for quantitation of ceramides at low concentrations. The fluorescence response is linear over a wide range of injected amount of ceramide III (expressed as stearoyl-phytosphingosine): 10 ng to 1000 ng. The response of ELSD is non linear but can be linearized in double logarithmic coordinates for calculations over a narrow range, e.g. between 10 to 350 ng ceramide III injected. The lower quantitation limits of these two detectors are similar: 5 ng ceramide III was injected.     

Humic substances of surface waters : Litter and soil throughflow relationships in two forested ecosystems

Humic substances were isolated from the vegetation throughfall, soil drainage waters and adjacent stream waters at two forested sites in the Central Region of Scotland. Fractionation on XAD-8 hydrophobic resin gave three humic substance components and one hydrophilic acid fraction. Norway spruce generally gave 2–3 times more dissolved organic carbon in the litter drainage compared with Sitka spruce, although there was little qualitative difference in organic acidity between the two litterflows. The humic substances in the drainage at ca. 1 m depth (BC horizon) showed considerable differences between sites, reflecting the types of soils and sources of soil water. Phenolic acids released on hydrolysis confirm the differences between sites and may indicate the sources of subsoil water and their relationships with the stream outputs.     

Supramolecular Luminescent Lanthanide Dimers for Fluoride Sequestering and Sensing

Lanthanide complexes (Ln=Eu, Tb, and Yb) that are based on a C₂‐symmetric cyclen scaffold were prepared and characterized. The addition of fluoride anions to aqueous solutions of the complexes resulted in the formation of dinuclear supramolecular compounds in which the anion is confined into the cavity that is formed by the two complexes. The supramolecular assembly process was monitored by UV/Vis absorption, luminescence, and NMR spectroscopy and high‐resolution mass spectrometry. The X‐ray crystal structure of the europium dimer revealed that the architecture of the scaffold is stabilized by synergistic effects of the Eu? F? Eu bridging motive, π stacking interactions, and a four‐component hydrogen‐bonding network, which control the assembly of the two [EuL] entities around the fluoride ion. The strong association in water allowed for the luminescence sensing of fluoride down to a detection limit of 24 nM .     

Influence of the non linear refraction index on the phase conjugation efficiency in stimulated scattering effects

The efficiency of the phase conjugated wave produced by stimulated backward scatterings has been calculated with the non linear propagation equation formalism. In the absence of optical Kerr effect, the phase conjugated efficiency remains smaller than 1. However, the calculations show that this efficiency may become much higher than 1 if the Kerr effect is taken into account.     

Nonlinear resonant ultrasound spectroscopy (NRUS) applied to damage assessment in bone

Nonlinear resonant ultrasound spectroscopy (NRUS) is a resonance-based technique exploiting the significant nonlinear behavior of damaged materials. In NRUS, the resonant frequency(ies) of an object is studied as a function of the excitation level. As the excitation level increases, the elastic nonlinearity is manifest by a shift in the resonance frequency. This study shows the feasibility of this technique for application to damage assessment in bone. Two samples of bovine cortical bone were subjected to progressive damage induced by application of mechanical cycling. Before cycling commenced, and at each step in the cycling process, NRUS was applied for damage assessment. For independent assessment of damage, high-energy x-ray computed tomography imaging was performed but was only useful in identifying the prominent cracks. As the integral quantity of damage increased, NRUS revealed a corresponding increase in the nonlinear response. The measured change in nonlinear response is much more sensitive than the change in linear modulus. The results suggest that NRUS could be a potential tool for micro-damage assessment in bone. Further work must be carried out for a better understanding of the physical nature of damaged bone and for the ultimate goal of the challenging in vivo implementation of the technique.     

One-pot preparation and uranyl adsorption properties of hierarchically porous zirconium titanium oxide beads using phase separation processes to vary macropore morphology

A simple and engineering friendly one-step process has been used to prepare zirconium titanium mixed oxide beads with porosity on multiple length scales. In this facile synthesis, the bead diameter and the macroporosity can be conveniently controlled through minor alterations in the synthesis conditions. The precursor solution consisted of poly(acrylonitrile) dissolved in dimethyl sulfoxide to which was added block copolymer Pluronic F127 and metal alkoxides. The millimeter-sized spheres were fabricated with differing macropore dimensions and morphology through dropwise addition of the precursor solution into a gelation bath consisting of water (H(2)O beads) or liquid nitrogen (LN(2) beads). The inorganic beads obtained after calcination (550 °C in air) had surface areas of 140 and 128 m(2) g(-1), respectively, and had varied pore architectures. The H(2)O-derived beads had much larger macropores (5.7 μm) and smaller mesopores (6.3 nm) compared with the LN(2)-derived beads (0.8 μm and 24 nm, respectively). Pluronic F127 was an important addition to the precursor solution, as it resulted in increased surface area, pore volume, and compressive yield point. From nonambient XRD analysis, it was concluded that the zirconium and titanium were homogeneously mixed within the oxide. The beads were analyzed for surface accessibility and adsorption rate by monitoring the uptake of uranyl species from solution. The macropore diameter and morphology greatly impacted surface accessibility. Beads with larger macropores reached adsorption equilibrium much faster than the beads with a more tortuous macropore network.     

Ultrasonically determined thickness of long cortical bones: Three-dimensional simulations of in vitro experiments

It was reported in a previous study that simulated guided wave axial transmission velocities on two-dimensional (2D) numerically reproduced geometry of long bones predicted moderately real in vitro ultrasound data on the same bone samples. It was also shown that fitting of ultrasound velocity with simple analytical model yielded a precise estimate (UTh) for true cortical bone thickness. This current study expands the 2D bone model into three dimensions (3D). To this end, wave velocities and UTh were determined from experiments and from time-domain finite-difference simulations of wave propagation, both performed on a collection of 10 human radii (29 measurement sites). A 3D numerical bone model was developed with tuneable fixed material properties and individualized geometry based on X-ray computed tomography reconstructions of real bones. Simulated UTh data were in good accordance (root-mean-square error was 0.40 mm; r(2)=0.79, p<0.001) with true cortical thickness, and hence the measured phase velocity can be well estimated by using a simple analytical inversion model also in 3D. Prediction of in vitro data was improved significantly (by 10% units) and the upgraded bone model thus explained most of the variability (up to 95% when sites were carefully matched) observed in in vitro ultrasound data.     

Effect of porosity on effective diagonal stiffness coefficients (cii) and elastic anisotropy of cortical bone at 1 MHz: a finite-difference time domain study

Finite-difference time domain (FDTD) numerical simulations coupled to real experimental data were used to investigate the propagation of 1 MHz pure bulk wave propagation through models of cortical bone microstructures. Bone microstructures were reconstructed from three-dimensional high resolution synchrotron radiation microcomputed tomography (SR-muCT) data sets. Because the bone matrix elastic properties were incompletely documented, several assumptions were made. Four built-in bone matrix models characterized by four different anisotropy ratios but the same Poisson's ratios were tested. Combining them with the reconstructed microstructures in the FDTD computations, effective stiffness coefficients were derived from simulated bulk-wave velocity measurements. For all the models, all the effective compression and shear bulk wave velocities were found to decrease when porosity increases. However, the trend was weaker in the axial direction compared to the transverse directions, contributing to the increase of the effective anisotropy. On the other hand, it was shown that the initial Poisson's ratio value may substantially affect the variations of the effective stiffness coefficients. The present study can be used to elaborate sophisticated macroscopic computational bone models incorporating realistic CT-based macroscopic bone structures and effective elastic properties derived from muCT-based FDTD simulations including the cortical porosity effect.