Heterogeneous Green Catalyst for Oxidation of Cyclohexene and Cyclooctene with Hydrogen Peroxide in the Presence of Host (Nanocavity of Y‐zeolite)/Guest (N4‐Cu(II) Schiff Base Complex) Nanocomposite Material

Copper(II) complex of a Schiff base ligand derived from pyrrolcarbaldehyde and o‐phenylenediamine (H₂L) has been synthesized and encapsulated in Y‐zeolite matrix. The hybrid material has been characterized by elemental analysis, IR and UV‐Vis spectroscopic studies as well as X‐ray diffraction (XRD) pattern. The encapsulated copper(II) catalyst is an active catalyst for the oxidation of cyclooctene and cyclohexene using H₂O₂ as oxidant. Under the optimized reaction conditions 81% conversion of cyclohexene with 65% selectivity for 2‐cyclohexenone formation and 87% conversion of cyclooctene with 46% selectivity for epoxide formation were obtained.     

Enhancing of asphaltene adsorption onto Fe3O4 nanoparticles coated with metal-organic framework Mil-101 (Cr) for the inhibition of asphaltene precipitation

In this study, the potential of MOF (Mil-101-Cr)-coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MOF MNPs) for asphaltene adsorption was investigated for the first time and the results were compared with magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs). The coprecipitation method was used for the synthesis of both nanoparticles and were verified using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM). The initial asphaltene concentration, nanoparticles concentration, and temperature were the investigated parameters that influenced the adsorption capacity. Increasing the asphaltene concentration, decreasing the mass of nanoparticles, and reducing the temperature could enhance the maximum asphaltene adsorption capacities of 0.79 for Fe₃O₄ MNPs and 0.98?mg?m^?2 for Fe₃O₄-MOF MNPs. Adsorption isotherms tests showed that the Langmuir model was in agreement with the experimental data. In addition, the evaluation of adsorption kinetics demonstrated that the pseudo-second-order Lagergren model predicted the results more precisely. The amount of asphaltene adsorption for Fe₃O₄-MOF MNPs was higher than that for Fe₃O₄ MNPs. These results recommend the application of MOF as an appropriate and effective coating for enhancing asphaltene adsorption.     

A comparative study to evaluate the performance of coated Fe3O4 nanoparticles for adsorption of asphaltene from crude oil in bench scale

The present study was conducted to evaluate the performance of magnetic Fe₃O₄ nanoparticles coated with polythiophene (PT), Mil-101 (Cr) (MOF), graphene oxide (GO), SiO₂, and chitosan for adsorption of asphaltene from crude oil in a bench scale setup. All nanoparticles were synthesized using co-precipitation method. The characteristics of nanoparticles were verified using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and field emission scanning electron microscope (FESEM) analyses. The concentration of nanoparticles was kept constant at the optimum value of 10g?L^?1. The amount of asphaltene adsorption was determined at different contact times of 0.5, 0.75, 1, 2, and 4 hours. The results showed that the adsorption increased with contact time and reached equilibrium after about 2 hours in both continuous and batch experiments. The amount of asphaltene adsorption was lower in continuous experiments compared to batch experiments. However, it was found that magnetic nanoparticles are applicable for inhibition of asphaltene precipitation under flow conditions. Furthermore, polythiophene coating on magnetic Fe₃O₄ nanoparticles had the highest capacity for asphaltene adsorption. Besides, by applying a magnetic field, the magnetic nanoparticles that adsorbed asphaltene can be separated from crude oil to prevent asphaltene aggregation and precipitation.     

The Possibility of Wax Formation in Gas Fields： a Case Study

Natural gas production from a gas reservoir(Reservoir A)located in the south of Iran,presents solids deposition during processing because the condensate contains suspended and dissolved solids.Solids deposition occurs not only in the transportation lines from the wells to the separators but also in the various operating units of gas streams and condensate stream.In this study,the multisolid-phase model has been used to predict the wax precipitation from gas and gas condensate fluids.The properties of gas and liquid phases are described using the Soave-Redlich-Kwong(SRK)equation of state.The model is then used to predict the possibility of the wax formation in Reservoir A gas facilities,located at the south of Iran.Solid deposition which occurred in the various streams of that facility confirmed the calculated results.Finally,the wax appearance temperature(WAT),the weight percent of wax formation and the effects of pressure and temperature on the wax formation were also predicted.     

New magnetic supported hydrazone Schiff base dioxomolybdenum (VI) complex: An efficient nanocatalyst for epoxidation of cyclooctene and norbornene

A new dioxomolybdenum (VI) complex with tridentate hydrazone Schiff base ligand (H₂L) derived from 2‐hydroxy‐5‐nitrobenzaldehyde and benzhydrazide was synthesized and designated as [MoO₂L (DMF)]·2H₂O. The Fe₃O₄@SiO₂‐CPS‐L‐MoO₂ (EtOH) nanocatalyst was successfully prepared by grafting H₂L ligand on modified Fe₃O₄ nanoparticles followed by reacting with MoO₂ (acac)₂. The complex and nanocatalyst were characterized by various techniques such as elemental analysis, mass, FT‐IR, UV–Vis, ¹H NMR, ¹³C{¹H}‐NMR, TGA, XRD, XPS, TEM, SEM and VSM. The catalytic activity of [MoO₂L (DMF)]2H₂O and Fe₃O₄@SiO₂‐CPS‐L‐MoO₂ (EtOH) were evaluated for the oxidation of various alkenes (cyclooctene, norbornene, cyclohexene, styrene and α‐methyl styrene) in the presence of tert‐butylhydroperoxide as oxidant. The results revealed that the catalysts were especially efficient for oxidation of cyclooctene and norbornene with 100% selectivity towards corresponding epoxide product. Fe₃O₄@SiO₂‐CPS‐L‐MoO₂ (EtOH) showed higher catalytic activity, shorter reaction time and higher turnover number (TON) compared with homogeneous complex [MoO₂L (DMF)]·2H₂O. Moreover, simple magnetic recovery from the reaction mixture and reuse for several times with no significant loss in activity were other advantages of the nanocatalyst.