Chemical versus Electrochemical Synthesis of Carbon Nano‐onion/Polypyrrole Composites for Supercapacitor Electrodes

The development of high‐surface‐area carbon electrodes with a defined pore size distribution and the incorporation of pseudo‐active materials to optimize the overall capacitance and conductivity without destroying the stability are at present important research areas. Composite electrodes of carbon nano‐onions (CNOs) and polypyrrole (Ppy) were fabricated to improve the specific capacitance of a supercapacitor. The carbon nanostructures were uniformly coated with Ppy by chemical polymerization or by electrochemical potentiostatic deposition to form homogenous composites or bilayers. The materials were characterized by transmission‐ and scanning electron microscopy, differential thermogravimetric analyses, FTIR spectroscopy, piezoelectric microgravimetry, and cyclic voltammetry. The composites show higher mechanical and electrochemical stabilities, with high specific capacitances of up to about 800 F g^?1 for the CNOs/SDS/Ppy composites (chemical synthesis) and about 1300 F g^?1 for the CNOs/Ppy bilayer (electrochemical deposition).     

Derivatisation in gas chromatographic determination of acidic herbicides in aqueous environmental samples

This paper reviews derivatisation processes applied in chromatographic determination of acidic herbicides (with carboxyl and phenol groups), mainly in aqueous environmental samples. The discussion focuses on the basic derivatisation reactions used to convert herbicides to derivatives to make them analysable by gas chromatography, and possibly to reduce detection limits and/or increase extraction recovery from aqueous samples. The reactions are transesterification, esterification, silylation, alkylation, and extractive and pyrolytic alkylation. The reagents used to conduct the reactions are numerous. Diazomethane is a very efficient methylation reagent but explosive and toxic. Methyl iodide also ensures rapid and efficient methylation. Benzyl bromide can be used directly in water but derivatisation yield is low and reproducibility is poor. Butyl chloroformate and dimethyl sulfite can also be used for derivatisation in water, and acetic anhydride can be used for in-situ derivatisation of phenolic herbicides. For increasing selectivity of GC detection pentafluorobenzyl bromide (for ECD) and (2-cyanethyl)dimethyl(diethylamino)silane (for NPD) have been applied. Very characteristic ions are produced in mass spectra if silyl groups are introduced, e.g. by using bis(trimethylsilyl)trifluoroacetamide. Tetramethylammonium, trimethylphenylammonium, tetraalkylammonium, and trimethylsulfonium hydroxides and salts can by used for derivatisation at elevated temperature in the GC injection port. Extractive alkylation is relatively efficient if tetraalkylammonium salts with long chain alkyl groups are used.     

A Modular Approach to Atropisomeric Bisphosphines of Diversified Electronic Density on Phosphorus Atoms

The series of C₂-symmetric biaryl core-based non-racemic bisphosphines possessing substituents of different electronic properties: both EDG and EWG were obtained in a short sequence of good yielding transformations, started from commercial 1,3-dimethyl-2-nitrobenzene. Several different approaches leading to the desirable ligands were practically evaluated. Notably, the synthesis of the entire series of ligands could be performed with the utilization of a single early-stage precursor DIDAB (6,6′-diiodo-2,2′,4,4′-tetramethylbiphenyl-3,3′-diamine), which could be easily obtained in enantiomerically pure form. The obtained compounds at concentrations of 50 and 200 µM showed various biological activity against normal human dermal fibroblast, ranging from inactivity through time-dependent action and ending up with high toxicity.     

Synthesis and Biological Activity of Ferrocenyl and Ruthenocenyl Analogues of Etoposide: Discovery of a Novel Dual Inhibitor of Topoisomerase II Activity and Tubulin Polymerization

Two series of the ferrocenyl and ruthenocenyl analogues of etoposide bearing 1,2,3-triazolyl or aminoalkyl linker were synthesized and evaluated for their cytotoxic properties, influence on the cell cycle, ability to induce tubulin polymerization, and inhibition of topoisomerase II activity. We found that the replacement of the etoposide carbohydrate moiety with a metallocenyl group led to organometallic conjugates exhibiting differentiated antiproliferative activity. Biological studies demonstrated that two ferrocenylalkylamino conjugates were notably more active than etoposide, with submicromolar or low-micromolar IC₅₀ values towards SW620, etoposide-resistant SW620E, and methotrexate-resistant SW620M cancer cell lines. Moreover, the simplest ferrocenylmethylamino conjugate exerted dual inhibitory action against tubulin polymerization and topoisomerase II activity while other studied compounds affected only topoisomerase II activity.     

Positive Effect of Cannabis sativa L. Herb Extracts on Skin Cells and Assessment of Cannabinoid-Based Hydrogels Properties

The skin is an organ that is constantly exposed to many external factors that can affect its structure and function. Due to the presence of different cannabinoid receptors on many types of skin cells, cannabinoids can interact directly with them. Therefore, as part of this work, the impact of two types of Cannabis sativa L. herb extracts on keratinocytes and fibroblasts was assessed. The content of biologically active compounds such as phenols, flavonoids, chlorophylls and cannabinoids was evaluated. The antioxidant capacity of prepared extracts using the DPPH radical, H₂DCFDA probe and measurement of superoxide dismutase activity was also assessed. The cytotoxicity of hemp extracts was determined using the Alamar Blue, Neutral Red and LDH assays. The ability of the extracts to inhibit the activity of matrix metalloproteinases, collagenase and elastase, was assessed. Preparations of model hydrogels were also prepared and their effect on transepidermal water loss and skin hydration was measured. The obtained results indicate that hemp extracts can be a valuable source of biologically active substances that reduce oxidative stress, inhibit skin aging processes and positively affect the viability of skin cells. The analysis also showed that hydrogels based on cannabis extracts have a positive effect on skin hydration.     

Flower Extracts as Multifunctional Dyes in the Cosmetics Industry

Flowers are a natural source of bioactive compounds that not only have antioxidant, anti-inflammatory, and anti-aging properties, but can also be used as natural dyes. For this reason, nowadays plants are widely used to produce natural cosmetics and foods. In these studies, the properties of the water extracts of Papaver rhoeas L., Punica granatum L., Clitoria ternatea L., Carthamus tinctorius L., and Gomphrena globosa L., as bioactive, natural dyes, were investigated. Plant flower extracts were tested for their antioxidant (ABTS and DPPH radical methods) and anti-inflammatory effects by determining the ability to inhibit the activity of lipoxygenase and proteinase. The extracts were tested for their cytotoxic effect on skin cells, using Alamar Blue and Neutral Red tests. The ability to inhibit the activity of enzymes responsible for the destruction of elastin and collagen was also studied. Research has shown that extracts have no toxic effect on skin cells, are a rich source of antioxidants and show the ability to inhibit the activity of elastase and collagenase enzymes. P. rhoeas extract showed the strongest antioxidant properties with IC50 value of 24.8 ± 0.42 µg/mL and 47.5 ± 1.01 µg/mL in ABTS and DPPH tests, respectively. The tested plants are also characterized by an anti-inflammatory property, for which the ability to inhibit lipoxygenase at a level above 80% and proteinase at the level of about 55% was noted. Extracts from P. rhoeas, C. ternatea, and C. tinctorius show the strongest coloring ability and can permanently dye cosmetic products, without significant color changes during the storage of the product.     

Human exhaled air analytics: biomarkers of diseases

Over the last few years, breath analysis for the routine monitoring of metabolic disorders has attracted a considerable amount of scientific interest, especially since breath sampling is a non-invasive technique, totally painless and agreeable to patients. The investigation of human breath samples with various analytical methods has shown a correlation between the concentration patterns of volatile organic compounds (VOCs) and the occurrence of certain diseases. It has been demonstrated that modern analytical instruments allow the determination of many compounds found in human breath both in normal and anomalous concentrations. The composition of exhaled breath in patients with, for example, lung cancer, inflammatory lung disease, hepatic or renal dysfunction and diabetes contains valuable information. Furthermore, the detection and quantification of oxidative stress, and its monitoring during surgery based on composition of exhaled breath, have made considerable progress. This paper gives an overview of the analytical techniques used for sample collection, preconcentration and analysis of human breath composition. The diagnostic potential of different disease-marking substances in human breath for a selection of diseases and the clinical applications of breath analysis are discussed.     

Neighbor Distinguishing Edge Colorings Via the Combinatorial Nullstellensatz Revisited

Consider a simple graph and its proper edge coloring c with the elements of the set . We say that c is neighbor set distinguishing (or adjacent strong) if for every edge , the set of colors incident with u is distinct from the set of colors incident with v. Let us then consider a stronger requirement and suppose we wish to distinguishing adjacent vertices by sums of their incident colors. In both problems the challenging conjectures presume that such colorings exist for any graph G containing no isolated edges if only . We prove that in both problems is sufficient. The proof is based on the Combinatorial Nullstellensatz, applied in the “sum environment.” In fact the identical bound also holds if we use any set of k real numbers instead of as edge colors, and the same is true in list versions of the both concepts. In particular, we therefore obtain that lists of length ( in fact) are sufficient for planar graphs.     

Asymptotically optimal neighbour sum distinguishing colourings of graphs

Consider a simple graph G = (V,E) and its proper edge colouring c with the elements of the set {1,2,…,k}. The colouring c is said to be neighbour sum distinguishing if for every pair of vertices u, v adjacent in G, the sum of colours of the edges incident with u is distinct from the corresponding sum for v. The smallest integer k for which such colouring exists is known as the neighbour sum distinguishing index of a graph and denoted by . The definition of this parameter, which makes sense for graphs containing no isolated edges, immediately implies that , where Δ is the maximum degree of G. On the other hand, it was conjectured by Flandrin et al. that for all those graphs, except for C₅. We prove this bound to be asymptotically correct by showing that . The main idea of our argument relays on a random assignment of the colours, where the choice for every edge is biased by so called attractors, randomly assigned to the vertices. © 2014 Wiley Periodicals, Inc. Random Struct. Alg., 47, 776–791, 2015