Incubation period in the 2,2,4,4‐tetramethyl‐1‐piperidinyloxy‐mediated thermal autopolymerization of styrene: Kinetics and simulations

Mechanisms and simulations of the induction period and the initial polymerization stages in the nitroxide‐mediated autopolymerization of styrene are discussed. At 120–125 °C and moderate 2,2,4,4‐tetramethyl‐1‐piperidinyloxy (TEMPO) concentrations (0.02–0.08 M), the main source of radicals is the hydrogen abstraction of the Mayo dimer by TEMPO [with the kinetic constant of hydrogen abstraction (k_h)]. At higher TEMPO concentrations ([N?] > 0.1 M), this reaction is still dominant, but radical generation by the direct attack against styrene by TEMPO, with kinetic constant of addition k_ad, also becomes relevant. From previous experimental data and simulations, initial estimates of k_h ≈ 1 and k_ad ≈ 6 × 10^?7 L mol^?1 s^?1 are obtained at 125 °C. From the induction period to the polymerization regime, there is an abrupt change in the dominant mechanism generating radicals because of the sudden decrease in the nitroxide radicals. Under induction‐period conditions, the simulations confirm the validity of the quasi‐steady‐state assumption (QSSA) for the Mayo dimer in this regime; however, after the induction period, the QSSA for the dimer is not valid, and this brings into question the scientific basis of the well‐known expression k_th[M]³ (where [M] is the monomer concentration and k_th is the kinetic constant of autoinitiation) for the autoinitiation rate in styrene polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6962‐6979, 2006     

Über die Reproduzierbarkeit der turbidimetrischen Bestimmung von Phosphorspuren mit Strychninmolybdostickstoff(V)säure

Microchimica Acta - Mit der turbidimetrischen Strychninnitrat-Methode für Phosphorspurenbestimmung nach der Version von Hegedüs und Dvorszky kann man nur dann ausgezeichnete...     

Solid-phase synthesis of phenols and pyridinones via arylboronation/oxidation protocol using aryl bromides

A sequence of two known reactions, palladium catalyzed arylboronation of arybromide and subsequent oxidation of arylboronate with oxone, has been carried out to prepare functionalized phenols and pyridin-2(1H)-one which were later loaded on to resin for solid-phase synthesis. Using these resin-bound templates, a number of solid-phase methods were developed to generate libraries of substituted phenols and pyridin-2(1H)-one.     

Rapid quantitative capillary zone electrophoresis method for monitoring the micro-heterogeneity of an intact recombinant glycoprotein

A simple high-resolution capillary zone electrophoresis (CZE) method capable of rapidly assessing the micro-heterogeneity of a 24 kDa molecular weight glycoprotein, has been developed. Separation is carried out using a bare silica capillary at a pH of 2.5 in a commercially available electrophoresis buffer system composed of triethanolamine and phosphoric acid. Over 30 peaks were detected within a run time of 15 min using a 27 cm capillary and approximately 60 peaks were detected using a 77 cm capillary. Although most of the peaks arise from differences in the oligosaccharide structures present on the one glycosylation site on this molecule, other forms of micro-heterogeneity due to the presence of the nonglycosylated form of this glycoprotein and various types of chemical degradation, e.g., deamidation, are also responsible for the multitude of peaks observed. Although the exact chemical identity of each peak in the resulting electropherogram of this glycoprotein is not known, useful information can be obtained for assessing comparability, stability, and batch consistency. Factors impacting the resolution, precision, accuracy, and robustness of the assay are also discussed along with inherent advantages and limitations associated with measuring the micro-heterogeneity of intact glycoproteins.     

Crystal growth and electrical properties of lithium,rubidium, and cesium molybdenum oxide bronzes

Crystals of Li_0.33 MoO₃ (blue), Rb_0.23MoO₃ (blue) and Cs_0.31MoO₃ (red) were grown by electrolysis from MoO₃M₂MoO₄ melts (M =alkali metal) with composition 70–77 mole% MoO₃. Melts richer in M₂MoO₄ produced MoO₂ only. Correlation is made between bronze formation and the coordination of Mo in the melt and in the equilibrium solid phase M₂Mo₄O₁₃. Li_0.33MoO₃ and Cs_0.31MoO₃ are semiconductors with high-temperature-range activation energies 0.16 and 0.12 eV. Rb_0.23MoO₃ has an electrical behavior similar to that of blue K_xMoO₃ with a semiconductor-metal transition at (170 ± 5) K. ESR spectra observed in Li_0.33MoO₃ and Rb_0.23MoO₃ single crystals at 4.2 K show extensive delocalization of the 4d¹ electron associated with Mo(V) centers. Attempts to grow molybdenum bronzes containing Ca or Y were unsuccessful.     

Beiträge zur Chemie der Pyrrolpigmente, 82. Mitt.: Wasserlösliche Polymere mit kovalent gebundenen violinoiden und 2,3-dihydro-verdinoiden Gallenfarbstoffen

Summary A violinoid and a 2,3-dihydrobilindione chromophore is attachedvia an appendix anchored at rings A of the pigments by means of reacting them with the polyacryl-N-acryloxysuccinimid copolymer to yield water-soluble chromopolymers. They are characterized by a molecular mass of about 4000 to 6000 and a relation of one chromophoric unit per 6 to 22 monomers. Their absorption spectra and circular dichroism recorded in water and dimethylsulfoxide as solvents are discussed with respect to structural aspects, and in comparison with monomeric chromophore derivatives.

Herrn Prof. Dr. K. Schlögl mit den besten Wünschen zum 65. Geburtstag gewidmet     

A low-cost lead-acid battery with high specific-energy

Lightweight grids for lead-acid battery grids have been prepared from acrylonitrile butadiene styrene (ABS) copolymer followed by coating with lead. Subsequently, the grids have been electrochemically coated with a conductive and corrosion-resistant layer of polyaniline. These grids are about 75% lighter than those employed in conventional lead-acid batteries. Commercial-grade 6V/3.5Ah (C₂₀-rate) lead-acid batteries have been assembled and characterized employing positive and negative plates constituting these grids. The specific energy of such a lead-acid battery is about 50 Wh/kg. The batteries can withstand fast charge-discharge duty cycles. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Design and characterization of a homodimeric antiparallel coiled coil

We report the first successful design of a self-associating antiparallel coiled coil, APH. The simultaneous application of Coulombic and hydrophobic components results in a decided preference for the antiparallel alignment as judged by HPLC, sedimentation equilibrium, and chemical denaturation data. The designed peptide is of comparable stability to naturally occurring leucine zipper peptides and can be expressed in bacteria. These properties of APH suggest potential in vivo protein fusion and biomaterials applications.     

Evaluation of Diabetes Effects of Selenium Nanoparticles Synthesized from a Mixture of Luteolin and Diosmin on Streptozotocin-Induced Type 2 Diabetes in Mice

The absence of a treatment efficient in the control of type 2 diabetes mellitus requires more functional products to assist treatment. Luteolin (LU) and diosmin (DIO) have been known as bioactive molecules with potential for the treatment of diabetes. This work aimed to establish the role that a combination of LU and DIO in selenium nanoparticles (SeNPs) played in streptozotocin (STZ)- induced diabetes mice. Green synthesis of Se NPs was performed by mixing luteolin and diosmin with the solution of Na₂SeO₃ under continuous stirring conditions resulting in the flavonoids conjugated with SeNPs. The existence of flavonoids on the surface of SeNPs was confirmed by UV-Vis spectra, Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) images, and DLS graphs via Zetasizer. The average diameter of GA/LU/DIO-SeNPs was 47.84 nm with a PDI of −0.208, a zeta potential value of −17.6, a Se content of 21.5% with an encapsulation efficiency of flavonoids of 86.1%, and can be stabilized by gum Arabic for approximately 175 days without any aggregation and precipitation observed at this time. Furthermore, The C57BL/6 mice were treated with STZ induced-diabetes and were exposed to LU/DIO, SeNPs, and GA/LU/DIO-SeNPs for six weeks. The treatment by nanospheres (GA/LU/DIO-SeNPs) in the mice with diabetes for a period of 6 weeks restored their blood glucose, lipid profile, glycogen, glycosylated hemoglobin, and insulin levels. At the same time, there were significant changes in body weight, food intake, and water intake compared with the STZ- untreated induced diabetic mice. Moreover, the GA/LU/DIO-SeNPs showed good antioxidant activity examined by catalase (CAT), superoxide dismutase (SOD), glutathione peroxidase (GPx) in liver and kidney and can prevent the damage in the liver evaluated by aspartate aminotransferase (AST), alanine aminotransferase (ALT), and alkaline phosphatase (ALP) activities. The nanospheres exhibited a significant anti-diabetic activity with a synergistic effect between the selenium and flavonoids. This investigation provides novel SeNPs nanospheres prepared by a high-efficiency strategy for incorporating luteolin and diosmin to improve the efficiency in type 2 diabetes.