Correlation of modified crack tip opening distance with heat input to the heat affected zone of high-strength low-alloy steels

Investigated is the dependency of the crack tip opening displacement (CTOD) on the local microstructure of the heat affected zone in high-strength low-alloy (HSLA) microalloyed steel. Since the initiation of the crack tip location could not be controlled in fatigue, any possible correlation between heat iput in welding and fracture toughness could be smeared. Modified CTOD data are defined; they show that the fracture resistance of the weld joint decreased as the heat input increased.     

Some remarks to multivariate regression model

Some remarks to problems of point and interval estimation, testing and problems of outliers are presented in the case of multivariate regression model. This work was supported by the Council of Czech Government J14/98:153100011.     

An interior–exterior Schwarz algorithm and its convergenceUn algorithme de Schwarz intérieur–extérieur et sa convergence

In this work we study the solution of Laplace's equation in a domain with holes by an iteration consisting of splitting the problem in an exterior one, around the holes, plus an interior problem in the unholed domain. We show the existence of a decomposition of the solution when the exterior problem is represented by means of a single-layer protential. Also, for the three-dimensional case and with some adjustments for the two-dimensional case, we prove convergence of the method by writing the iteration as a Jacobi iteration for an operator equation and studying the spectrum of the iteration operator. To cite this article: R. Celorrio et al., C. R. Acad. Sci. Paris, Ser. I 334 (2002) 923–926.     

On a category of module bundles

It is shown, that the category ℰ _A (X) ofA-bundles over a topological spaceX is an additive pseudo-Abelian category for each Waelbroeck algebraA. This research was supported by Greek State Scholarship Foundation and Estonian Science Foundation grant 6205.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Effect of short glass fiber on structure and viscoelastic behavior of olefinic polymers synthesized with metallocene catalyst

Several composites were prepared on the basis of an ethylene homopolymer and different copolymers of ethylene and 1‐hexene, synthesized with a metallocene catalyst, as matrices and a content of a 5 wt % of short glass fiber. The effect of the fiber incorporation on the structure and mechanical and viscoelastic behaviors was analyzed for the different samples. The glass fibers induced a slightly higher crystallinity, and the crystallite morphology significantly changed (long spacings and crystal orientation). The incorporation of fibers did not reinforce the different matrices under study at this low content; consequently, the mechanical parameters, such as Young's modulus, yielding stress, and microhardness, were lower in the composites as compared with those values found in the neat polyolefins. The location and apparent activation energies of distinct relaxation processes are also discussed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1244–1255, 2003     

Mechanisms of n‐butanol formation in butyl acrylate latexes

The mechanisms involved in the formation of n‐butanol during the synthesis of butyl acrylate containing latices were investigated. The experimental results showed that neither the hydrolysis of butyl acrylate nor of the ester bond in the butyl acrylate segments of the polymer played a major role in the formation of n‐butanol, which was mainly generated from the polymer backbone, by transfer reactions to polymer chain followed by cyclization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5838–5846, 2007