Determination of55Fe/58Fe and59Fe/58Fe isotopic ratios in irradiated Na2/FeNO/CN/5/.2H2O by SSMS

A procedure for the measurement of the isotopic composition of Fe in rradiated Na₂/FeNO/CN/₅/.2H₂O samples by SSMS is described. Decomposition with K₂S₂O₇, followed by extraction of Fe was necessary to eliminate interferences in the mass spectra. A study of the remaining interferences showed that they were of organic origin from the residual MIBK used for the extraction. The order of magnitude of the⁵⁵Fe/⁵⁸Fe and⁵⁹Fe/⁵⁸Fe ratios was calculated.SSMS: spark source mass spectrometry.     

Rhodium-catalyzed hydroformylation of C6 alkenes and alkene mixtures - a comparative study in homogeneous and aqueous-biphasic media using PPh3, TPPTS and TPPMS ligands

The complexes RhH(CO)L₃, where L = PPh₃, P(m-C₆H₄SO₃Na)₃ (TPPTS), and (C₆H₅)₂P(m-C₆H₄SO₃Na) (TPPMS) were used as catalyst precursors for a comparative study of the catalytic hydroformylation of several C6 alkenes and alkene mixtures under moderate reaction conditions in homogeneous (PPh₃) and aqueous-biphasic (TPPTS, TPPMS) media. The biphasic systems are efficient for the hydroformylation of hex-1-ene, 2,3-dimethyl-1-butene, styrene, cyclohexene, and mixtures thereof, in water/n-heptane at 80 °C. The main problem associated with these catalysts is their tendency to promote alkene isomerization if the effective syngas concentration in the liquid phases is low, but this side-reaction can be suppressed by using higher CO/H₂ pressures (54 atm). The selectivity of both water-soluble catalysts for linear products of hex-1-ene and for branched products of styrene is modest in comparison with the homogeneous system, which may limit their utility for classical oxo uses, but this is not a disadvantage for other interesting applications related to the hydroformylation of alkene mixtures and particularly to naphtha upgrading where linear and branched products are equally useful. The catalysts can be recycled without significant loss of activity and are resistant to the presence of benzothiophene in the mixture.     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

A survey of pseudo (v,k, λ)-designs

This work is an attempt to give a complete survey of all known results about pseudo (v, k, )-designs. In doing this, the author hopes to bring more attention to his conjecture given in Section 6; an affirmative answer to this conjecture would settle completely the existence and construction problem for a pseudo (v, k, )-design in terms of the existence of an appropriate (v, k, )-design.     

Characterization and determination of 28 elements in fly ashes collected in a thermal power plant in Argentina using different instrumental techniques

Different techniques were selected for comprehensive characterization of seven samples of fly ashes collected from the electrostatic precipitator of the San Nicolás thermal power plant (Buenos Aires, Argentina). Particle size was measured using laser based particle size analyzer. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the mineral phase present in the matrix consisting basically of aluminosilicates and large amounts of amorphous material. The predominant crystalline phases were mullite and quartz. Major and minors elements (Al, Ca, Cl, Fe, K, Mg, Na, S, Si and Ti) were detected by energy dispersive X-ray analysis (EDAX). Trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, V and Zn) content was quantified by inductively coupled plasma optical emission spectrometry (ICP OES). Different acid mixtures and digestion procedures were compared for subsequent ICP OES measurements of the dissolved samples. The digestion procedures used were: i) a mixture of FH + HNO₃ + HClO₄ (open system digestion); ii) a mixture of FH + HNO₃ (MW-assisted digestion); iii) a mixture of HF and aqua regia (MW-assisted digestion). Instrumental neutron activation analysis (INAA) was employed for the determination of As, Ba, Co, Cr, Ce, Cs, Eu, Fe, Gd, Hf, La, Lu, Rb, Sb, Sc, Sm, Ta, Tb, Th, U and Yb. The validation of the procedure was performed by the analysis of two certified materials namely, i) NIST 1633b, coal fly ash and ii) GBW07105, rock. Mean elements content spanned from 41870 μg g^− 1 for Fe to 1.14 μg g^− 1 for Lu. The study showed that Fe (41870 μg g^− 1) ? V (1137 μg g^− 1) > Ni (269 μg g^− 1) > Mn (169 μg g^− 1) are the main components. An enrichment, with respect to crustal average, in many elements was observed especially for As, V and Sb that deserve particular interest from the environmental and human health point of view.     

Substitution pattern elucidation of hydroxypropyl Pinus pinaster (Ait.) bark polyflavonoid derivatives by ESI(−)‐MS/MS

The structure of condensed tannins (CTs) from Pinus pinaster bark extract and their hydroxypropylated derivatives with four degrees of substitution (DS 1, 2, 3 and 4) has been characterized for the first time using negative‐ion mode electrospray ionization tandem mass spectrometry (ESI(?)‐MS/MS). The results showed that P. pinaster bark CTs possess structural homogeneity in terms of monomeric units (C₁₅, catechin). The oligomer sizes were detected to be dimers to heptamers. The derivatives showed typical phenyl‐propyl ether mass fragmentation by substituent elimination (58 amu) and inherent C₁₅ flavonoid fissions. The relative abundance of the product ions revealed a preferential triple, tetra‐/penta‐ and octa‐ hydroxypropylation substitution pattern in the monomer, dimer and trimer derivatives, respectively. A defined order of –OH reactivity towards propylene oxide was established by means of multistage experiments (A‐ring ≥ B‐ring > C‐ring). A high structural heterogeneity of the modified oligomers was detected. Copyright © 2014 John Wiley & Sons, Ltd.     

Modular Hadamard matrices and related designs,III

This paper continues the investigations presented in two previous papers on the same subject by the author and A. T. Butson. Modular Hadamard matrices havingn odd andh ≡ ? 1 (modn) are studied for a few values of the parametersn andh. Also, some results are obtained for the two related combinatorial designs. These results include: a discussion on the known techniques for constructing pseudo (v, k, λ)-designs; the fact that the existence of one of the two related designs always implies the existence of the other; and some information about the column sums of the incidence matrix of each of the two ‘maximal’ cases of (m, v, k ₁,λ ₁,k ₂,λ ₂,f, λ ₃)-designs.     

Isolation and characterization of kallosin A,a novel rearranged pseudopterane diterpenoid from the Caribbean sea plume Pseudopterogorgia kallos (Bielschowsky)

The Caribbean alcyonacean Pseudopterogorgia kallos is shown to contain a novel rearranged pseudopterane diterpene, kallosin A (1), possessing several unusual structural features. In addition to having two distinct 2(3H)- and 2(5H)-furanone moieties, kallosin A is based on a new carbon skeleton. The structural assignment of 1 was based mainly on 1D and 2D NMR spectral data and was further supported by accurate mass measurement and single-crystal X-ray diffraction analysis.     

Optimization and empirical modeling of HG-ICP-AES analytical technique through artificial neural networks.

An artificial neural network technique has been applied to the optimization of a hydride generation-inductively coupled plasma-atomic emission spectrometry (HG-ICP-AES) coupling for the determination of Ge at trace levels. The back propagation of errors net architecture was used. Experimental parameters and their relationship have been studied, obtaining a surface response of the system. The results and optimization aspects achieved with the neural network approach have been compared to the "one variable at time" and SIMPLEX methods.