Zinn und Antimon in Legierungen

Ohne Zusammenfassung     

Gas chromatographic separation of anaesthetic gases on a single column

Summary Gas chromatography has been employed in the separation of mixtures of air, carbon dioxide, nitrous oxide and a volatile anaesthetic (halothane, isoflurane or enflurane) on a single Chromosorb 101 column by temperature programming from room temperature. Calibration over the required range for the analysis of exhaled air, demonstrated good linearity with a repeatability for test mixtures of about 1%.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Digests or extracts?—Some interesting but conflicting results for three widely differing polluted sediment samples

Three sets of samples have been investigated in some detail. One set is from a river polluted by mine workings, containing substantial levels of Fe, Mn,Cu, Zn and Ni with traces of many other metals. The second set consists of typical estuarine sediments contaminated from a wide range of industrial sources, and the third set consists of oily drilling cuttings from the sea bottom in the vicinity of a North Sea oil production platform.These samples have been subjected to treatment 1) with EDTA at two different pH's (extracts) 2) with HNO₃/H₂O₂ 3) with HNO₃/HCl and 4) with HNO₃/HCl/HF (digests). EDTA recoveries, compared toaqua regia digests, are often very reproducible, not dependent on pH, and usually significantly low. Nitric/peroxide andaqua regia digests often give very close results suggesting that these are meaningful values indicating the maximum levels of polluting metals in the sediments. However, the triple acid digest with HF does sometimes give higher values (and reasonable agreement for CRM's such as MESS-1) but with poorer reproducibility.     

Oxidation of ferrocene and some substituted ferrocenes in the presence of horseradish peroxidase

The enzyme catalysed oxidation of ferrocene and some substituted ferrocenes to the corresponding ferricinium ions by hydrogen peroxide in the presence of native or immobilized horseradish peroxidase has been studied. Initial and maximum rates of oxidation have been determined. It was found that the oxidation was independent of the hydrogen peroxide concentration. The oxidation of ferrocene was effected also by horseradish peroxidase in a coupled system with glucose oxidase in the absence of any added hydrogen peroxide.     

The synthesis and electronic structure of a novel [NiS4Fe2(CO)6] radical cluster: implications for the active site of the [NiFe] hydrogenases

A novel [NiS4Fe2(CO)6]cluster (1: 'S(4)'=(CH(3)C(6)H(3)S(2))(2)(CH(2))(3)) has been synthesised, structurally characterised and has been shown to undergo a chemically reversible reduction process at -1.31 V versus Fc(+)/Fc to generate the EPR-active monoanion 1(-). Multifrequency Q-, X- and S-band EPR spectra of (61)Ni-enriched 1(-) show a well-resolved quartet hyperfine splitting in the low-field region due to the interaction with a single (61)Ni (I=3/2) nucleus. Simulations of the EPR spectra require the introduction of a single angle of non-coincidence between g(1) and A(1), and g(3) and A(3) to reproduce all of the features in the S- and X-band spectra. This behaviour provides a rare example of the detection and measurement of non-coincidence effects from frozen-solution EPR spectra without the need for single-crystal measurements, and in which the S-band experiment is sensitive to the non-coincidence. An analysis of the EPR spectra of 1(-) reveals a 24 % Ni contribution to the SOMO in 1(-), supporting a delocalisation of the spin-density across the NiFe(2) cluster. This observation is supported by IR spectroscopic results which show that the CO stretching frequencies, nu(CO), shift to lower frequency by about 70 cm(-1) when 1 is reduced to 1(-). Density functional calculations provide a framework for the interpretation of the spectroscopic properties of 1(-) and suggest that the SOMO is delocalised over the whole cluster, but with little S-centre participation. This electronic structure contrasts with that of the Ni-A, -B, -C and -L forms of [NiFe] hydrogenase in which there is considerable S participation in the SOMO.     

MODELING HARVEST SCHEDULING IN MULTIFUNCTIONAL PLANNING OF FORESTS FOR LONGTERM WATER YIELD OPTIMIZATION

In this study, wood production and hydrologic functions of forests were accommodated within a planning procedure for separate working circles (areas dedicated to certain forest functions) that were delineated according to an Ecosystem‐Based Functional Planning approach. Mixed integer goal programming was used as the optimization technique. The timing and scheduling of a maintenance cutting (partial harvest) was the decision variable in the modeling effort, and an original formulation was developed as a multiobjective planning procedure. Four sample planning strategies were developed and model outputs were evaluated according to these strategies. Spatial characteristics of stands were considered, and used to prohibit the regeneration of adjacent stands during the same time period. Because of the positive relationship between qualified water production and standing timber volume in the forest, the model attempts to maximize qualified water production levels by increasing standing volume stocks in the forest through the delay of regeneration activities.     

Long-term neprilysin gene transfer is associated with reduced levels of intracellular Abeta and behavioral improvement in APP transgenic mice

Background  

Proteolytic degradation has emerged as a key pathway involved in controlling levels of the Alzheimer's disease (AD)-associated amyloid-β (Aβ) peptide in the brain. The endopeptidase, neprilysin, has been implicated as a major Aβ degrading enzyme in mice and humans. Previous short and intermediate term studies have shown the potential therapeutic application of neprilysin by delivering this enzyme into the brain of APP transgenic mice using gene transfer with viral vectors. However the effects of long-term neprilysin gene transfer on other aspects of Aβ associated pathology have not been explored yet in APP transgenic mice.     

Direct analysis of solid samples by GFAAS – determination of trace heavy metals in barytes

Solid sampling graphite furnace atomic absorption spectroscopy (SS-GFAAS) has been used for the determination of traces of heavy metals (Cd, Pb, Cu, Cr, Ni, V and As) in barytes over a wide concentration range, e.g. Cd from 0.023 to 27.0 μg/g and Pb from 1.54 to 3509 μg/g.The necessity of determining heavy metals in commercial barytes (naturally occurring barium sulfate), a mineral important to the oil industry because of its use in drilling muds, is discussed. The problems presented by the analysis of this difficult matrix are elegantly solved by using SS-GFAAS for the direct determination of heavy metals. A high-performance graphite furnace AAS with D₂-background correction system and a transversely heated graphite atomizer was used for the investigations. The spectrometer was combined with a mechanical sampling module and an ultramicrobalance. The transfer of solid samples (sample weights 0.031–0.686 mg) into the atomizer was carried out by using an optimized graphite platform as the sample carrier. Calibration curve techniques and standard addition methods were employed using external standards (CRMs). Problems associated with signal deformations like multiple peaks, tailing or shoulders are also discussed and possibilities to solve the problems are given. The influence of the homogeneity of solid samples on the precision and accuracy are shown in a real example. The results obtained by SS-GFAAS were compared with results by other methods like X-ray fluorescence spectroscopy (XRF) and flame AAS after aqua regia microwave extraction. This study has demonstrated that SS-GFAAS is a very powerful and easy-to-use method for quick and accurate analysis of barytes. Received: 9 November 1998 / Revised: 29 January 1999 / Accepted: 2 February 1999     

Anisotropy in the breathing zone of a thermal manikin

This paper describes anisotropy of various second moments along with detailed mean velocities in the human breathing zone. High anisotropy levels have been anticipated due to the complexity of the flow and low Reynolds number in our cubicle sized setting. The measurement system is a standard stereo PIV system acquiring data along a sinusoidal breathing waveform in the breathing zone of a thermal manikin both with and without rotational motion. Results suggest that the airflow due to breathing is anisotropic. Because of this, common isotropic assumptions made in this environment are not admissible.