The influence of slits on sound transmission through a lightweight partition

In this paper the influence on sound reduction index of the length and the depth of sound leaks at the perimeter of lightweight partitions was examined. It was shown that the most important decrease on sound reduction index is caused by the first slit between lightweight partition and one of the structural members. When the length of the slit is increased, the decrease on sound reduction index is less significative. Calculated results show the same effects as measured ones.     

Excess enthalpies of (methyl propanoate or methyl pentanoate + 1-alkanol) at 298.15 K

The excess molar enthalpies H_m^E of methyl propanoate or methyl pentanoate + 1-butanol, + 1-hexanol, + 1-octanol, and + 1-decanol have been determined experimentally at 298.15 K using a Calvet microcalorimeter. For all these mixtures H_m^E > 0; the values increase with the chain length of the alkanol but decrease as the ester chain lengthens.     

Electron impact mass spectrometry of 3-hydroxy-3,4,5,6-tetrahydro-2H-[1]benzoxocines. A comparison with the behaviour of isomeric 2-hydroxymethyl-2,3,4,5-tetrahydro-[1]-benzoxepines and 1,2-epoxy-5-(2-hydroxyphenyl)pentane

The mass spectrometric behavior of 3-methyl-3-hydroxybenzoxocines has been studied in detail by means of linked scans and mass analyzed ion kinetic energy spectrometry. The structure of the molecular ion and the fragmentation processes are strictly related to the structure of the neutral moieties. The possible isomerization of 3-hydroxy-10-methoxy-3-methyl-3,4,5,6-tetrahydro-2H-[1]benzoxocine to 2-methyl-2-[3-(3′-methoxy-2′-hydroxy)phenyl]pentyloxirane and to 2-hydroxymethyl-9-methoxy-2-methyl-2,3,4,5-tetrahydro[1]benzoxepine is investigated.     

A new approach for fluorine determination by solid sampling graphite furnace molecular absorption spectrometry

This work deals with the determination of fluorine by solid sampling graphite furnace molecular absorption spectrometry. The molecular absorbance of aluminum monofluoride (AlF), which is produced in the vapor phase in the presence of Al³⁺, is measured at 227.5 nm, a non-resonant platinum line. A conventional graphite furnace program has been used with pyrolysis and vaporization temperatures of 800 and 2300 °C, respectively. Solutions of Ba²⁺ and Al³⁺ have been used to avoid fluorine losses during the pyrolysis stage and to produce AlF in the vaporization stage, respectively. Certified coal and alumina samples were analyzed using aqueous standards for calibration. The agreement between the found concentration and the certified value, or the value obtained by another method ranged from 92 to 105%, with a relative standard deviation less than 8.5%. The limit of detection and the characteristic mass was 0.17 μg g^− 1 and 205 pg, respectively.     

Traceless solid-phase synthesis of 2,4,6-chlorodiamino and triaminopyrimidines

An effective traceless solid-phase synthesis of chloro-diaminopyrimidines via an amino-de-chlorination reaction of polymer-bound 4-alkoxycarbonylamino-2,6-dichloropyrimidines has been developed. After release from the polymer the target molecules were obtained in good to excellent purity, although with modest regiocontrol. Further reaction of solid-supported N-alkoxycarbonyl-chloro-diaminopyrimidines with secondary amines afforded triaminopyrimidines in good purity under mild conditions, whereas less nucleophilic primary amines did not perform well under the conditions explored so far.     

Developing an on-line derivatization of FAs by microwave irradiation coupled to HPLC separation with UV detection

The development of analytical methods for routine simultaneous identification and quantification of carboxylic fatty acids (CFAs) are required in different fields, such as, pharmaceutical cosmetics, food products and formulations of water–microemulsion–oil systems. Determination of CFAs has been developed mainly by gas chromatography (GC). As an alternative to GC, liquid chromatography (LC) has better sensitivity and selectivity. However, most CFAs show no useful absorption in ultraviolet–violet (UV–Vis) region, one of the more used detection technique in high-performance liquid chromatography (HPLC). In order to allow the use of UV–Vis detection, the use of pre-column derivatization has been reported to increase sensitivity and selectivity. Therefore, establishment of a simpler and faster on-line method with complete separation is needed for the screening of large numbers of samples. 2,4-Dinitrophenylhydrazine (2,4-DNPH.), benzoil chloride (BC), and phenylhydrazine (PH) were used for derivatization of different FAs by microwaves radiation (MW). After the on-line derivatization, products were separated and quantified by HPLC. Reactor coil was placed inside of microwaves oven at 450 W. Parameters as flow, amount of reagents, irradiation time, and chromatographic conditions were optimized. The continuous analysis using the MW–HPLC–UV system provided high sensitivity and reduced both the amount of reagent used and the analysis times. This proposed method can be used for the routine analysis of FAs contained in water–microemulsion–oil systems, to quantify the total acid fraction in each phase.     

Synthesis of stereo-defined α-trifluoromethyl (Tfm)-malic units

Aldol reactions of titanium enolates of N-acyl-1,3-oxazolidin-2-ones with ethyl trifluoropyruvate occurred with low to good stereoselectivity depending on the steric properties of the N-acyl group. Attempts to transform the resulting aldols into peptidomimetics incorporating stereo-defined α-trifluoromethyl (Tfm)-malic units are described.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.