Identification of Al(III) species in a solution containing equimolar concentrations of Al(III) and citric acid using varying-temperature 27Al NMR spectrometry.

27Al NMR spectra of an equimolar (10 mM) Al(III)-citrate system were obtained at different temperatures. The linewidths of the signals decreased in the spectra recorded at elevated temperatures, which enabled us to unequivocally identify the resonance lines. From the spectrum recorded at 65 approximately C, a mononuclear Al(III)-citrate complex was identified at a solution pH of 3.0 in addition to trinuclear Al(III)-citrate complex, which dominated at pH 4.0.     

Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Application of 1,2,3,5,6,7-hexahydropyrrolizinium perchlorate in the synthesis of 7a-substituted hexahydro-1h-pyrrolizines

The method for preparing 7a-substituted hexahydro-1H-pyrrolizines 2 from 1,2,3,5,6,7-hexahydropyrrol-izinium Perchlorate (3) was investigated, by which introduction of a wide variety of functionalities on C(7a) could be achieved easily.     

Thermal behavior of ternary Sm2Fe17Nx magnets

The Mössbauer spectra of Sm₂Fe₁₇N_x, prepared by the nitrogenation of Sm₂Fe₁₇ powders in an ammonia and hydrogen atmosphere, were observed at elevated temperatures to shed light on the thermal behavior of nitrogen in the compounds Sm₂Fe₁₇N_x. It was found that there were large differences in thermal behavior between the starting Sm₂Fe₁₇, crystalline Sm₂Fe₁₇N_x (x≈1.7) and amorphous Sm₂Fe₁₇N_x(x～7). The thermal decomposition behavior of Sm₂Fe₁₇N_3.2, developed as one of the most promising hard magnetic materials, was found to be different under different atmospheres.     

The molecular structure and chemical reactivities of the condensation products of o-substituted benzylidenacetylacetone with hydrazine dihydrochloride

Reaction of o-nitrobenzylideneacetylacetone ( 1a ) with hydrazine dihydrochloride in methanol gave 4-(α-methoxy-o-nitrobenzyl)-3,5-dimethylpyrazole hydrochloride ( 4a ), whose structure was unambigously confirmed by an X-ray crystallographic analysis, via 4-(o-nitrobenzylidene)-3,5-dimethylisopyrazole ( 2a ). Compound 2a was synthesized by condensation of 1a with hydrazine dihydrochloride in acetonitrile. Analogously the corresponding o-chloro derivatives ( 2b, 4b ) were obtained. These were converted to N-methyl ( 6b ) and N-acetyl ( 7a,b ) derivatives and the behaviors on bromination and pyrolysis were investigated.     

Novel properties of molecular assemblies of isoprenoid surfactants

Unlike micelles of straight hydrocarbon chain-surfactants, isoprenoid surfactants, CH₃ [CH(CH₃)CH₂CH₂CH₂]₃ CH(CH₃)CH₂–R (R=CH₂N⁺ (CH₃)₃ Br^–, CH₂OPO₃H^– Na⁺, CH₂OSO ₃ ^– Na⁺, CO ₂ ^– Na⁺), gave large globular and cellular assemblies in water which could be observed directly by transmission electron microscopy; critical micelle concentration of 0.31.4×10^–3 M at 20°C, aggregation number of 215×10⁴, and diameter of 200–2000 Å. A basic structure of the assemblies was a thin layer with a thickness (about 30 Å) which was close to the molecular length of the surfactants. The assemblies were decomposed during gel column chromatography; viz., they were not as stable as the liposomes of lecithins. The morphology was discussed in conjunction with a steric effect of the isoprenoid chain.     

Synthetic study of optically active and C2-symmetric novel ligand, 7,8-bis(benzyloxy)bicyclo[2.2.2]octa-2,5-diene and a tricarbonyliron complex

The 7,8-bis(benzyloxy)bicyclo[2.2.2]octa-2,5-diene derivatives have been synthesized via Diels-Alder reaction of optically active 5,6-bis(benzyloxy)cyclohexa-1,3-diene and dienophiles. The corresponding tricarbonyliron complexes have also been synthesized in enantiomerically pure form.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

Synthesis of the ABCD ring of gambierol

A fully functionalized ABCD ring moiety of gambierol, a marine polycyclic ether toxin, was synthesized by the use of the oxiranyl anion strategy and reductive cycloetherification of a beta,delta-dihydroxy ketone.