Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

On-line coupling of supercritical fluid extraction with high-performance liquid chromatography for the determination of explosives in vapour phases

An investigation into the selectivity of an iminodiacetic acid (IDA) modified silica gel column for transition and heavy metal ions using non-chelating inorganic eluents has been carried out. A number of eluent parameters were investigated to determine the exact retention mechanism taking place and to control selectivity. The parameters studied were eluent ionic strength and the nature of the inorganic salt used, eluent pH and eluent temperature. The results obtained showed how despite certain metal ions exhibiting similar stability constants with the bonded IDA groups, careful control of each of the above parameters, in particular eluent chloride ion concentration and eluent temperature, could result in large changes in selectivity. Optimal conditions for the isocratic and gradient separation of Mg(II), Ca(II), Mn(II), Cd(II), Co(II), Zn(II) and Pb(II) were determined. An isocratic method using a 0.035 M KCl, 0.065 M KNO3 (pH 2.5) eluent was successfully applied to the determination of Mn(II), Cd(II), Co(II) and Zn(II) at concentrations between 20 and 121 microg/l in a freshwater certified reference material (NIST 1640).     

Evaluation of glycoalkaloids in tubers of genetically modified virus Y-resistant potato plants (var. Désirée) by non-aqueous capillary electrophoresis coupled with electrospray ionization mass spectrometry (NACE–ESI–MS)

The glycoalkaloid content of transgenic potatoes was evaluated by an optimised method based on non-aqueous capillary electrophoresis coupled on-line with electrospray ionization-mass spectrometry (NACE-ESI-MS). The potato material consisted of tubers from a conventional cv. Désirée and from three lines of modified plants resistant, intermediate and susceptible to infection by potato virus Y (PVY). The main glycoalkaloids were confirmed to be alpha-solanine and alpha-chaconine with parent ion masses m/z 852 and 868, respectively. In addition, an unknown minor peak at m/z 850.6 was found both in conventional (control) and susceptible line potato tubers. Such a compound exhibited an MS(2) spectrum with fragments ions at 704 and 396 m/z derived by loss of two ions, i.e. m/z 146 and 307, most likely corresponding to a rhamnose unit and a [glucose-(rhamnose)(2)] moiety, respectively. Up to 30-80-fold higher concentrations of total glycoalkaloids were found in the peel compared to flesh samples of all tubers examined. TGA content was nearly doubled in peel samples of resistant compared to control lines, and these levels were lower than the limit recommended for food safety, i.e. 20-60 mg of TGA per 100 g fresh weight. Moreover, it was established that tubers produced by virus-resistant clones are substantially equivalent in glycoalkaloid contents to those produced by conventional potato varieties.     

Understanding the role of stereoelectronic effects in determining collagen stability. 2. A quantum mechanical/molecular mechanical study of (Proline-Proline-Glycine)(n) polypeptides

The importance of vicinal and long-range interresidue effects in determining the stability of the collagen triple helix has been investigated by quantum mechanical (QM) and molecular mechanical (MM) computations on suitable model polypeptides, taking into account solvent effects by the polarizable continuum model (PCM). At the QM level, the PII conformation corresponds to an energy minimum for pentapeptide analogues incorporating the sequence Gly-Pro-Pro-Gly, irrespective of the down or up puckering of the pyrrolidine ring. However, our computations indicate that the alternation of down and up prolines characterizing collagen and collagen-like peptides is not due to an intrinsic preference of the Pro-Pro-Gly sequence. This result is confirmed by MM computations of longer polypeptides. Next, MM computations on model triple helices show that a better packing is obtained for specific values of backbone dihedrals, which, in turn, favor the alternation of down and up prolines along each chain.     

Solvent effects on 17O nuclear magnetic shielding: N-methylformamide in polar and apolar solutions

The solvent effect on ¹⁷O isotropic shielding was computed by different methods: the polarizable continuum model and a mixed approach, including a few real solvent molecules treated as the solute. The experimental data show that the behavior of protic and aprotic solvents is markedly different: we found that the continuum approach describes well the observed shielding at various dielectric constants for aprotic solvents, while the mixed procedure is needed when hydrogen bonds to the magnetic centre are present.Contribution to the Jacopo Tomasi Honorary Issue     

Electronic structure of Cr clusters on graphite

The electronic structure of small chromium clusters deposited by evaporation onto clean polycrystalline graphite has been studied by means of Auger, X-ray Photoemission (XPS) and Electron Energy Loss (EELS) spectroscopies. The XPS results show an increase in the binding energy of both core levels and valence band reducing the cluster size. The EELS measurements show a variation of the intensity ratio of L₃-to-L₂ ionization core edges. We interpret this change as due to different redistribution, within the clusterd-band, of the empty states above the Fermi level. As a consequence the XPS results may also be attributed to sizeable change of the electronic structure of the small clusters.     

The hydrophobic effect in aqueous solutions of nonelectrolytes. I. Self-interactions of alkylureas

In order to clarify some aspects of the hydrophobic interactions, the enthalpies of dilution of monoethylurea, 1,3-dimethylurea, and 1,3-diethylurea have been determined calorimetrically at 25°C. The calorimetric data, expressed in terms of excess enthalpy, permit the evaluation of the pair and triplet interaction coefficients. The analyses of these and of the analogous coefficientsg _xx andg _xxx, derived from osmotic data, indicate a driving force favorable to the interactions among the hydrated solute molecules. Nevertheless, the positive values of theh _xx andh _xxx coefficients seem to suggest that the source of the effect is a rearrangement of the water molecules rather than a direct association of the solute molecules. There are evidences of a strict correlation between the enthalpic and the entropic effects. Preliminary data were presented at the International Conferences on Chemical Thermodynamics at Baden (1973) and Montpellier (1975). The experimental part was carried out at the Istituto Chimico of the University of Trieste. To whom correspondence should be addressed.     

Interaction of Crystal Violet and Polyanions in Aqueous Solution

The effect of several polyelectrolytes on the absorption spectrum of crystal violet (CV) has been studied over a wide range of pH. The following polymers were used: isotactic poly(methacrylic acid), PMA_i; conventional poly(methacrylic acid), PMA_c; a methacrylic acid (80%)-styrene (20%) copolymer, PMAS; and poly(styrene sulfonic acid), PSSA. Distinctly different effects were observed in the four cases. This has been interpreted in terms of a dependence of the degree and mode of binding of cationic dye molecules onto the polyacids on the hydrophobicity of the macroions.     

Dark Fermentative Hydrogen Production from Neutralized Acid Hydrolysates of Conifer Pulp

Concentrated acid hydrolysis of cellulosic material results in high dissolution yields. In this study, the neutralization step of concentrated acid hydrolysate of conifer pulp was optimized. Dry conifer pulp hydrolysis with 55?% H₂SO₄ at 45?°C for 2?h resulted in total sugar yields of 22.3?C26.2?g/L. The neutralization step was optimized for solid Ca(OH)₂, liquid Ca(OH)₂ or solid CaO, mixing time, and water supplementation. The highest hydrogen yield of 1.75?mol?H₂/mol glucose was obtained with liquid Ca(OH)₂, while the use of solid Ca(OH)₂ or CaO inhibited hydrogen fermentation. Liquid Ca(OH)₂ removed sulfate to below 30?mg SO₄ ^2?/L. Further optimization of the neutralization conditions resulted in the yield of 2.26?mol?H₂/mol glucose.