Insights into MWCNTs/polyimide nanocomposites: from synthesis to application as free-standing flexible electrodes in low-cost micro-supercapacitors

In the pursuit to enlarge the library of polyimide materials for energy applications, new polyimide/MWCNTs composite films have been developed by MWCNTs-assisted polycondensation reaction of a hydroxyl and triphenylmethane-containing diamine with benzophenone tetracarboxylic dianhydride targeting to highlight their electrical storage capability as flexible electrodes in micro-supercapacitors (mSCs). The Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance, UV–vis, fluorescence, and Raman spectroscopies were used to demonstrate the evolution of interfacial interactions between MWCNTs and the precursors (diamine monomer and intermediate polyamidic acid) and polyimide matrix that proved to be the origin of MWCNTs homogeneous dispersion. Thus, composite films incorporating 1, 3, 5, and 10 w.t.% MWCNTs were obtained and thoroughly investigated with regard to their morphology, mechanical behavior, thermal stability, and electrical conductivity. The electrochemical performance of these composites was first analyzed in a classical three-electrode cell by cyclic voltammetry and galvanostatic charge-discharge in both aqueous and organic electrolyte systems. By far, the best electrical storage capacity was obtained with the composite polyimide film containing 10% MWCNTs that was further used as both active material and current collector in a flexible symmetric mSC realized by a straightforward and low-cost procedure. In the attempt to better exploit the advantages of this composite film, it was layered with a graphite-containing paint and tested as an electrode in a flexible mSC, which provided satisfactory results. To our knowledge, this is the first report on the electrical charge storage capability of a polyimide/MWCNTs free-standing film as a flexible electrode in mSCs, which do not require time- and resource-consuming processing steps.     

Aromatic Copolyimides Containing Perylene Units

Perylene-containing copolyimides have been synthesized by one-step polycondensation reaction under high temperature of two different aromatic diamines with a mixture of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) and 4,4'-hexafluoroisopropylidene diphthalic anhydride (6FDA). The copolyimides were soluble in polar amidic solvents and their solutions gave flexible thin films when spread onto glass plates. Very thin films obtained by spin coating had smooth surfaces and were self-organized into vertically segregated structures. The polymers were highly thermostable, their decompositions being above 470 °C and displayed reasonable high glass transition temperature values. After being excited with UV light, the polymers emitted light in the bluish and green-yellow domains.     

Aromatic polyamides with pendent acetoxybenzamide groups and thin films made therefrom

New aromatic polyamides containing 1,3,4-oxadiazole or benzonitrile units in the main chain and 5-(4-acetoxybenzamido) groups in the side chain have been synthesized and their properties have been characterized and compared with those of related polyamides and polyoxadiazole-amides. These polymers show good thermal stability, with initial decomposition temperature being at about 300 °C and glass transition temperature in the range of 260-280 °C. They are easily soluble in certain solvents such as N-methylpyrrolidinone (NMP), N,N^′-dimethylacetamide (DMA) and N,N^′-dimethylformamide (DMF) and can be cast from solutions into thin flexible films. The polymer films had tensile strengths in the range of 77-97 MPa, tensile moduli in the range of 2.3-2.6 GPa and elongation at break values ranging from 6% to 24%. One of the polymers containing the 1,3,4-oxadiazole ring exhibited blue fluorescence.     

Copoly(peryleneimide)s containing 1,3,4‐oxadiazole rings: Synthesis and properties

New copolyimides containing perylenediimide, oxadiazole and hexafluoroisopropylidene moieties were prepared by one‐step polycondensation reaction in solution at high temperature of aromatic diamines containing preformed oxadiazole ring with a mixture of a dianhydride having a perylene ring and another dianhydride with hexafluoroisopropylidene unit. The thermal stability and glass transition temperatures of these copolyimides were measured and compared with those of related polyimides. The solid polymers were also studied by polarized light microscopy and X‐ray diffraction which revealed a semicrystalline state consisting of face‐to‐face arranged columns of perylenediimide units. The film‐forming ability and properties of the resulting thin films were investigated by using atom force microscopy and scanning electron microscopy which showed that the films were organized into self‐assembled rod‐like structures. The UV‐Vis and photoluminescence properties in solution and in solid state were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4230–4242, 2010     

Blue fluorescent polyamides containing naphthalene and oxadiazole rings

New polyamides containing 1,3,4‐oxadiazole and naphthalene rings were prepared by low‐temperature solution polycondensation reaction of a new diamine containing preformed oxadiazole ring with various aromatic diacid chlorides. Elemental analysis, mass, infrared, and nuclear magnetic resonance spectroscopy were used to confirm the structure of the monomers and corresponding polymers. The thermal stability and glass transition temperatures of these poly(oxadiazole‐amide)s were measured and compared with those of related polymers. Their good solubility allows them to be processed in very thin films with smooth surfaces, without pinholes or cracks, when studied by atomic force microscopy. Upon irradiation with UV light the polymers showed photoluminescence maxima in the blue spectral range, both in solution and in solid state. Cyclic voltammetry (CV) was performed in order to obtain information about the electrochemical stability and reversibility of the redox processes of these polyamides. The highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels, and electrochemical and optical band gap values were calculated by using the results of CV and UV/vis, respectively, showing very good electron and hole injection and transport characteristics. These properties make the present polymers suitable for application in electroluminescent devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polynaphthylimides based on isomeric 2,5-bis[(aminophenoxy)phenylen]-1,3,4-oxadiazoles

Polynaphthylimides containing 1,3,4-oxadiazole cycles in main chains of macromolecules are prepared via the interaction of isomeric 2,5-bis[(aminophenoxy)phenyl]-1,3,4-oxadiazoles with dianhydrides of naphthalene-1,4,5,8-tetracarboxylic acid and 1,3-bis(1,8-dicarboxynaphthoyl-4)benzene. These polymers are synthesized through high-temperature polycyclocondensation in N-methylpyrrolidone and molten phenol. The relationships between the solubility and thermal characteristics of polynaphthylimides and their structure are studied, and the optical properties of the polymers are estimated.     

Designing thermotropic liquid crystalline polyazomethines based on fluorene and/or oxadiazole chromophores

The main objective of this paper was to synthesize luminescent thermotropic liquid crystalline polyazomethines containing chromophoric mesogen, which design has been addressed to optoelectronic materials. The investigation of the thermotropic behavior by three complementary methods of analyses, i.e. polarized optical microscopy, differential scanning calorimetry and wide angle X-ray diffraction, indicated a nematic mesophase for the polymers containing oxadiazole units, either alternating or random ones. A mesomorphic state maintaining the degree of order of the semicrystalline state while being viscous fluid was evidenced too. The photoluminescence spectra recorded for both polymer solutions and films exhibited a blue light emission. These results point to the possibility of obtaining monodomain or multidomain ordered thin films without grain boundaries showing good mechanical and luminescent properties.     

Polynaphthylimide–Azomethines Containing Triphenylamine or Carbazole Moieties with Tuned Optoelectronic Properties through Molecular Design

Polyazomethines containing electron-donor triphenylamine (TPA) or carbazole (Cbz) and electron-acceptor naphthyl(di)imide were synthesized and investigated with regard to thermal, optical and electronic features, with a focus on their modulation by molecular design. The polycondesation of an imido-based diamine with a Cbz- or TPA-based dialdehyde led to donor-acceptor polymers with good thermostability, up to 318 °C. These displayed good solubility in organic solvents, which enabled easy polymer processability in thin films with different molecular assemblies. The molecular order improved the charge carrier’s mobility, with a direct impact on the bandgap energy. The optical properties studied by UV–Vis absorption and fluorescence experiments showed solvent-dependence, characteristic for donor-acceptor systems. The structural parameters exerted a strong influence on the light-emissive behavior, with the prevalence of intrinsic or intramolecular charge transfer fluorescence contingent on the donor-acceptor strength and polymer geometry. All polymers showed good electroactivity, supporting both electrons and holes transport. The exchange of Cbz with TPA proved to be an efficient tool with which to decrease the bandgap energy, while that of naphthyl(di)imide with bis(naphthylimide) was beneficial for fluorescence enhancement. This study may contribute to a deeper understanding of the physico-chemistry of electronic materials so as to make them more competitive in the newest energy-related or other optoelectronic devices.     

KrF pulsed laser ablation of thin films made from fluorinated heterocyclic poly(naphthyl-imide)s

Among the many aspects of laser ablation, development of conical structures induced by excimer laser radiation on polyimide surfaces has been thoroughly investigated. Because the mechanisms that produce these surface textures are not fully understood, two theories, photochemical bond breaking and thermal reaction, have been introduced. Here we present the first study of ultraviolet laser ablation behavior of thin films made from fluorinated poly(naphthyl-imide)s containing oxadiazole rings and the investigation of the mechanism of cone-like structure formation at two laser fluences, 57 and 240 mJ/cm(2). The morphology of thin films before and after laser ablation was studied by using various spectroscopy techniques such as Fourier transform infrared spectroscopy, time-resolved emission and X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle measurements. All of the data suggest impurities shielded at low fluence radiation (57 mJ/cm(2)) and a radiation hardening process at high value fluence (240 mJ/cm(2)), which are proposed as the main mechanisms for laser ablation of our polyimide films, and we bring evidence to support them.     

New halogen-containing polyimides based on 1,3-bis(3,4-dicarboxyphenyl)-1,1,3,3-tetramethyldisiloxane dianhydride

Previously undescribed halogen-containing polyimides are synthesized via the interaction of 1,3-bis(3,4-dicarboxyphenyl)-1,1,3,3-tetramethyldisiloxane dianhydride with aromatic diamines containing hexafluoroisopropylidene and dichloroethylene groups. The influence of tetramethyldisiloxane, hexafluoroisopropylidene, and dichloroethylene groups incorporated into these polymers on their solubility, heat resistance, thermal stability, and film-forming properties is investigated.