Photochromic reverse mode polymer dispersed liquid crystals

Control of light intensity and colour are two of the major features required in the realization of smart windows. We designed a bi-functional polymer dispersed liquid crystal (PDLC) film in order to satisfy such requirements, i.e. it is able both to modulate the optical transmission, if an external electric field is applied, and to change colour if exposed to sunlight. A monomer/liquid crystal mixture was doped with a small amount of photochromic material and homeotropically aligned by means of rough surfaces. A transparent and pale pink coloured film was achieved after photopolymerization. Such a film changes colour upon exposure for some seconds to sunlight or ultraviolet radiation in a persistent but reversible manner. In addition, the film appears transparent without the application of an electric field (OFF state) and becomes opaque on application of a driving voltage of about 75 V (ON state), and thus the film operates in reverse mode with respect to conventional PDLCs.     

Surface anchoring,polarization fields and memory states in polymer dispersed liquid crystals

We have investigated the formation and development of memory states in polymer dispersed liquid crystals induced by the application of a strong electric field. Both the optical transmittance and polarization field have been followed as functions of time. We have been able to distinguish between the contributions to the memory states arising from the surface anchoring of the liquid crystal at the droplet interface and from the electrical reorientation of the mesogenic molecules. The dependence of both residual transmittance and polarization field on temperature is reported and a simple model is proposed.     

Morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals

We have investigated the morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals as a function of liquid crystal loading. Reverse mode shutters have been obtained by a polymerization-induced phase separation of mixtures, consisting of a liquid crystalline monomer and a non-reactive nematic liquid crystal, placed between rough conductive surfaces. Such surfaces are able to keep the photopolymerizable mixtures homeotropically aligned without the use of any aligning polymer substrate. OFF state transmittances are always larger than 80% and the switching fields decrease if the non-reactive liquid crystal percentage is increased. Both rise and decay times are always lower than 10 ms. The electro-optical properties have been related to the sample morphology and a simple mode is proposed.     

Photochromic reverse mode polymer dispersed liquid crystals

Control of light intensity and colour are two of the major features required in the realization of smart windows. We designed a bi‐functional polymer dispersed liquid crystal (PDLC) film in order to satisfy such requirements, i.e. it is able both to modulate the optical transmission, if an external electric field is applied, and to change colour if exposed to sunlight. A monomer/liquid crystal mixture was doped with a small amount of photochromic material and homeotropically aligned by means of rough surfaces. A transparent and pale pink coloured film was achieved after photopolymerization. Such a film changes colour upon exposure for some seconds to sunlight or ultraviolet radiation in a persistent but reversible manner. In addition, the film appears transparent without the application of an electric field (OFF state) and becomes opaque on application of a driving voltage of about 75?V (ON state), and thus the film operates in reverse mode with respect to conventional PDLCs.     

Liquid crystal orientation in elliptic droplets in nematic emulsions

Elliptic droplets of nematic liquid crystal dispersed in a fluid organic monomer were obtained by phase separation from an isotropic mixture consisting of an organic monomer and a nematic liquid crystal contained in a poly(ethylene terephthalate) cell with inner surfaces treated with rubbed polyimide. The elliptic shape is a consequence of the constraint upon droplet growth along the direction perpendicular to the cell surfaces owing to the small thickness. Then, the resulting droplets will have a contact area with the inner surfaces of the cell treated with polyimide, which will impart a planar orientation on the liquid crystal in the droplet. By means of an optical microscope, using a simple pin hole of 5 μ m, we have selected single droplets for a series of samples having different contact areas. By polarized infrared spectroscopy we have also studied the liquid crystal orientation in selected areas of the droplets. We then report the dependence of the order parameter of the liquid crystal on different contact areas with the alignment surface of the cell. The good degree of planar alignment of the liquid crystal in the elliptic droplets allows the use of such a technique for realizing electro-optical films operating in the reverse mode. We report the electro-optical transmission of reverse mode films with different sizes of elliptic droplet.     

Organocatalytic Control over a Fuel-Driven Transient-Esterification Network**

Signal transduction in living systems is the conversion of information into a chemical change, and is the principal process by which cells communicate. In nature, these functions are encoded in non-equilibrium (bio)chemical reaction networks (CRNs) controlled by enzymes. However, man-made catalytically controlled networks are rare. We incorporated catalysis into an artificial fuel-driven out-of-equilibrium CRN, where the forward (ester formation) and backward (ester hydrolysis) reactions are controlled by varying the ratio of two organocatalysts: pyridine and imidazole. This catalytic regulation enables full control over ester yield and lifetime. This fuel-driven strategy was expanded to a responsive polymer system, where transient polymer conformation and aggregation are controlled through fuel and catalyst levels. Altogether, we show that organocatalysis can be used to control a man-made fuel-driven system and induce a change in a macromolecular superstructure, as in natural non-equilibrium systems.     

Protease Production by Different Thermophilic Fungi

A comparative study was carried out to evaluate protease production in solid-state fermentation (SSF) and submerged fermentation (SmF) by nine different thermophilic fungi – Thermoascus aurantiacus Miehe, Thermomyces lanuginosus, T. lanuginosus TO.03, Aspergillus flavus 1.2, Aspergillus sp. 13.33, Aspergillus sp. 13.34, Aspergillus sp. 13.35, Rhizomucor pusillus 13.36 and Rhizomucor sp. 13.37 – using substrates containing proteins to induce enzyme secretion. Soybean extract (soybean milk), soybean flour, milk powder, rice, and wheat bran were tested. The most satisfactory results were obtained when using wheat bran in SSF. The fungi that stood out in SSF were T. lanuginosus, T. lanuginosus TO.03, Aspergillus sp. 13.34, Aspergillus sp. 13.35, and Rhizomucor sp. 13.37, and those in SmF were T. aurantiacus, T. lanuginosus TO.03, and 13.37. In both fermentation systems, A. flavus 1.2 and R. pusillus 13.36 presented the lowest levels of proteolytic activity.     

Resveratrol Analogues as Dual Inhibitors of Monoamine Oxidase B and Carbonic Anhydrase VII: A New Multi-Target Combination for Neurodegenerative Diseases?

Neurodegenerative diseases (NDs) are described as multifactorial and progressive syndromes with compromised cognitive and behavioral functions. The multi-target-directed ligand (MTDL) strategy is a promising paradigm in drug discovery, potentially leading to new opportunities to manage such complex diseases. Here, we studied the dual ability of a set of resveratrol (RSV) analogs to inhibit two important targets involved in neurodegeneration. The stilbenols 1–9 were tested as inhibitors of the human monoamine oxidases (MAOs) and carbonic anhydrases (CAs). The studied compounds displayed moderate to excellent in vitro enzyme inhibitory activity against both enzymes at micromolar/nanomolar concentrations. Among them, the best compound 4 displayed potent and selective inhibition against the MAO-B isoform (IC₅₀ MAO-A 0.43 µM vs. IC₅₀ MAO-B 0.01 µM) with respect to the parent compound resveratrol (IC₅₀ MAO-A 13.5 µM vs. IC₅₀ MAO-B > 100 µM). It also demonstrated a selective inhibition activity against hCA VII (K_I 0.7 µM vs. K_I 4.3 µM for RSV). To evaluate the plausible binding mode of 1–9 within the two enzymes, molecular docking and dynamics studies were performed, revealing specific and significant interactions in the active sites of both targets. The new compounds are of pharmacological interest in view of their considerably reduced toxicity previously observed, their physicochemical and pharmacokinetic profiles, and their dual inhibitory ability. Compound 4 is noteworthy as a promising lead in the development of MAO and CA inhibitors with therapeutic potential in neuroprotection.     

Development of CDK4/6 Inhibitors: A Five Years Update

The inhibition of cyclin dependent kinases 4 and 6 plays a role in aromatase inhibitor resistant metastatic breast cancer. Three dual CDK4/6 inhibitors have been approved for the breast cancer treatment that, in combination with the endocrine therapy, dramatically improved the survival outcomes both in first and later line settings. The developments of the last five years in the search for new selective CDK4/6 inhibitors with increased selectivity, treatment efficacy, and reduced adverse effects are reviewed, considering the small-molecule inhibitors and proteolysis-targeting chimeras (PROTACs) approaches, mainly pointing at structure-activity relationships, selectivity against different kinases and antiproliferative activity.