Quantum Interference, Quantum Theory of Measurement, and (In)completeness of Quantum Mechanics

The new techniques and ideas in quantum interferometry with neutrons, photons, atoms, electrons, and Bose condensates that fluorished in the last two decades have influenced in a decisive way the thinking and the research in the foundations and interpretation of quantum mechanics. The controversies existing among different schools on the reality of matter waves of quantum theory, the postulates of quantum measurement theory, and the (in)completeness of quantum mechanics have to be approached now in a new way. Our argumentation follows the spirit of the Paris school.     

Intake of different chemical species of dietary arsenic by the japanese,and their blood and urinary arsenic levels

We calculated the intake of each chemical species of dietary arsenic by typical Japanese, and determined urinary and blood levels of each chemical species of arsenic. The mean total arsenic intake by 35 volunteers was 195±235 (15.8-1039) μg As day^?1, composed of 76% trimethylated arsenic (TMA), 17.3% inorganic arsenic (As_i), 5.8% dimethylated arsenic (DMA), and 0.8% monomethylated arsenic (MA): the intake of TMA was the largest of all the measured species. Intake of As_i characteristically and invariably occurred in each meal. Of the intake of As_i, 45-75% was methylated in vivo to form MA and DMA, and excreted in these forms into urine. The mean measured urinary total arsenic level in 56 healthy volunteers was 129±92.0 μg As dm^?3, composed of 64.6% TMA, 26.7% DMA, 6.7% As_i and 2.2% MA. The mean blood total arsenic level in the 56 volunteers was 0.73±0.57 μg dl^?1, composed of 73% TMA, 14% DMA and 9.6% As_i. The urinary TMA levels proved to be significantly correlated with the whole-blood TMA levels (r = 0.376; P<0.01).     

Z/E-photoisomerizations of olefins with 4npi- or (4n + 2)pi-electron substituents: zigzag variations in olefin properties along the T(1) state energy surfaces

[Figure: see text]. A quantum chemical study has been performed to assess changes in aromaticity along the T1 state Z/E-isomerization pathways of annulenyl-substituted olefins. It is argued that the point on the T1 energy surface with highest substituent aromaticity corresponds to the minimum. According to Baird (J. Am. Chem. Soc. 1972, 94, 4941), aromaticity and antiaromaticity are interchanged when going from S0 to T1. Thus, olefins with S0 aromatic substituents (set A olefins) will be partially antiaromatic in T1 and vice versa for olefins with S0 antiaromatic substituents (set B olefins). Twist of the C=C bond to a structure with a perpendicular orientation of the 2p(C) orbitals (3p*) in T1 should lead to regaining substituent aromaticity in set A and loss of aromaticity in set B olefins. This hypothesis is verified through quantum chemical calculations of T1 energies, geometries (bond lengths and harmonic oscillator measure of aromaticity), spin densities, and nucleus independent chemical shifts whose differences along the T1 PES display zigzag dependencies on the number of -electrons in the annulenyl substituent of the olefin. Aromaticity changes are reflected in the profiles of the T1 potential energy surfaces (T1 PESs) for Z/E-isomerizations because olefins in set A have minima at 3p* whereas those in set B have maxima at such structures. The proper combination (fusion) of the substituents of set A and B olefins could allow for design of novel optical switch compounds that isomerize adiabatically with high isomerization quantum yields.     

Speciation of chromium in waste waters by coupled column ion chromatography-inductively coupled plasma mass spectrometry

An application of coupled column ion chromatography (IC)-inductively coupled plasma mass spectrometry (ICP-MS) is presented for speciation of chromium in waste waters. By coupling an anion column with a cation column, both the cationic Cr(III) and anionic Cr(VI) species can be analyzed with detection limits below 0.5 μg/1. The separation of the interfering ions (chloride, chlorate, perchlorate, sulphate, sulphite, sulphide, thiosulphate, carbonate, cyanide and some organic compounds) from the chromium peaks is discussed, and the use of different chromium isotopes for data acquisition is compared. Based on the results, m/z 52 was considered as an ideal isotope for speciation of chromium in waste waters by the coupled column IC-ICP-MS, because it did not suffer from polyatomic interferences and due to the high sensitivity for chromium. The analysis of the waste water samples should be performed as soon as possible after sampling according to the stability tests of the species.     

Synthesis of Urea‐Tethered Disaccharides in Water

A new method for the synthesis of urea‐linked disaccharides in aqueous media has been developed. The key feature of our approach is two strained Steyermark‐type gluco‐ and galactopyranosyl oxazolidinones. Each oxazolidinone is attached to a pyranose ring in a di‐equatorial trans‐annulation framework. Reaction of these oxazolidinones with 4‐aminohexopyranose in water proceeded smoothly to afford the urea‐tethered cellobiose and lactose analogues. The galactose‐type oxazolidinone proved to be more reactive than the glucose‐type, which is explained by the presence of an axial hydroxy group at C4 in the former.     

Self-ordering process of phenanthrene polyesters observed by the simultaneous DSC-XRD method

Phase transition behavior of polyesters derived from 2,7-phenanthrene dicarbonic acid diethylester and alkanediols with even methylene carbon number was investigated by the simultaneous DSC-XRD method. The smectic A phase was observed on cooling from the molten state. The transition entropy from the isotropic state to the smectic A phase was about 9.0 J mol^-1 K^-1, which depended on the methylene carbon number. The linear expansion coefficients, based on the (001) spacing of the crystalline phase at room temperature, were 1.3·10^-4 K^-1 (crystalline phase), 5.7·10^-4 K^-1 (crystallization region), 1.7·10^-3 K^-1 (smectic A phase) during cooling, and 1.5·10^-4 K^-1 (crystalline phase), and 1.0·10^-3K^-1(melting region) on heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

Redox activity and diffusion of hydrophilic, hydrophobic, and amphiphilic redox active molecules in a bicontinuous cubic phase

The objective was to examine how a bicontinuous cubic phase influences the diffusion and electrochemical activity of dissolved molecules. The cubic phase is a structure with three-dimensional continuous channels of water separated by an apolar membrane. A redox active molecule can dissolve in three different environments. A hydrophobic molecule will prefer the interior of the membrane, a hydrophilic molecule will prefer the water channels, and an amphiphilic molecule will be situated with its headgroup at the surface of the membrane and its tail in the interior. The electrochemical activity was measured with cyclic voltammetry and the transport behavior with chronocoulometry. All the molecules were redox active in the cubic phase; that is, all the molecules could reach the surface of the electrode and react. The cubic phase made the kinetics of the charge transfer slower, showing a quasi-reversible behavior. The reason may be that a layer of the membrane adheres to the hydrophobic electrode surface. The diffusion experiment showed that the diffusion was slower than in solution. The molecules that were restricted to diffuse within the membrane gave particularly low mass transport rates.     

Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

Theoretical study of benzonitrile clusters in the gas phase and their adsorption onto a Au(111) surface

We made theoretical calculations for a benzonitrile molecule and its clusters in the gas phase and as adsorbed on the Au(111) surface, to explain the observation by scanning tunneling microscope, that is, the trimer formation of cyanophenyl porphyrins adsorbed onto the Au(111) surface. With regard to the gas-phase species, ab initio calculations showed that (1) the benzonitrile dimer has a single stable structure that is planar and antiparallel; (2) the trimer has two isoenergetic stable structures, that is, a planar and cyclic structure and an antiparallel and nonplanar one; (3) the clusters are more stable, at low temperatures, than the monomer. For the adsorbed species, we made quantum mechanical/molecular mechanical calculations in which the interaction between the adsorbates and the surface is evaluated in a molecular-mechanical way by using analytical potential functions and an image charge model. Because the stable structures were found to be similar to those in the gas phase, the cluster formation of adsorbed cyanophenyl porphyrins was attributed to the interaction between cyanophenyl groups, which is barely affected by adsorbate-surface interaction. It was also found that the adsorbed cyclic benzonitrile trimer is more stable than the monomer and the dimer because the relative stability is dependent on enthalpy alone. We therefore concluded that the preferential formation of trimers by the adsorbed cyanophenyl porphyrins is due to the negligible contribution of entropy to the relative stability of the adsorbed species and that the adsorption hardly changes the situation found in the gas phase.