Kinetics of zinc(II) cloride extraction with tributyl phosphate

The equilibrium and rate of solvent extraction of zinc chloride complexes from HCl solutions into benzene solutions of tributyl phosphate (TBP) have been studied. The extracted species are discussed in the light of the results. The extraction was found to be first order with respect to both Zn(II) and TBP, and zero order for HCl. The rate-controlling steps are discussed and the rate constants for these reactions are calculated.     

Separation of europium and thulium from mixed KI−H2SO4 solutions

The extraction of Tm with HDEHP from H₂SO₄, HCl and HBr is inversely proportional to the third power of the hydrogen ion concentration while the extraction is small with HDEHP, LA-2 and TBP from binary mixtures of acids. The extraction of both Eu and Tm with HDEHP from KI solutions decreases in the presence of small concentrations of H₂SO₄. The decrease is sharper in case of Eu leading to high separation factors between Eu and Tm from KI?H₂SO₄ mixtures.     

133Xe release during post-irradiation annealing of uranium metal in the presence of a constant volume of air

The fractional release of¹³³Xe at different temperatures was studied as a function of time in the presence of an atmosphere of air during post-irradiation annealing of uranium metal. It was found that the relation between the fractional release and t^1/2 is irregular. There is an initial step in the annealing curves (at the temperature range of 400–710°C) which decreases by increasing temperature and totally disappears at the high temperature of 800–1000 °C. The other parts of the release curves are typical for¹³³Xe release from uranium metal. The initial step was found to be due to the surface oxidation of uranium metal.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

A comparative investigation of the fatty acid compositions of the seeds of a number of lines of a genetic collection of Gossypium hirsutum

A comparative analysis has been made of the amounts of lipids and their fatty-acid compositions in the seeds of the lines of agenetic collection of cotton plants of the speciesGossypium hirsutum and their hybrids and the variety Tashkent-1. The results obtained on the fatty-acid compositions of some hybrids make it possible to recommend the use of individual lines of cotton plants as donors for improving the food-value indices of cottonseed oil.Institute of Chemsitry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 173–176, March–April, 1991.     

Ion Exchange Separation of Eu3+ from Different Salt Solutions

Two samples of potassium zinc hexacyanoferrate were prepared using two different ratios of the initial materials. The distribution coefficient of Eu³⁺ on the two samples was determined. The effect of the cation concentration in the aqueous phase on the adsorption of Eu³⁺ was also studied. The mechanism of the exchange process was described on the light of the data obtained, and the equilibrium constant of the exchange reaction was also calculated.     

多功能两亲梳状聚合物的合成及包覆荧光量子点

利用溶液聚合和成酰胺反应合成了多功能梳状两亲性共聚物,聚(甲基丙烯酸-co-甲基丙烯酸十八酯)-(乙醇胺-乙二胺叶酸)(PSM-EE-FA).用红外光谱(FTIR),核磁共振(1H-NMR)及凝胶渗透色谱(GPC)表征了该聚合物的结构及分子量分布.实验结果证明合成了该聚合物,其数均分子量(Mn)为28600,多分散性为1.375.用该两亲梳状聚合物包覆油溶性CdSe/ZnS量子点,通过相转移作用,得到水溶性靶向量子点(PSM-EE-FA-QDs).该水溶性量子点溶液具有较好的稳定性.通过紫外-可见(UV-Vis)及荧光发射光谱分析对该量子点的光学性质进行研究.结果表明,PSM-EE-FA-QDs的紫外-可见光谱及荧光发射光谱峰形与原量子点基本一致.由于量子点表面聚合物层的形成,峰位发生少量红移.该量子点水溶液的荧光强度是原量子点氯仿溶液的98%,荧光产率是原量子点氯仿溶液的95%.动态光散射(DLS)及透射电镜(TEM)测试结果表明水溶性量子点分布均匀.合成的水溶性量子点不但光学性能稳定,而且聚合物及水溶性量子点的合成方法较为简便.     

相对论性核碰撞中Φ介子产生和弦碎裂函数

用强子和弦级联模型LUCIAE系统研究从AGS到SPS,到RHIC,再到LHC能量核–核碰撞中Φ介子产生.采用与能量有关弦碎裂函数,并通过与荷电粒子多重数实验数据的比较确定其中的参数后,LUCIAE模型给出的Φ介子产额与实验数据也都相近,得到的事件平均弦碎裂变量随能量之增趋饱和规律,可能是核穿透性能量行为的定性表示.     

以LCD为目标的自动定焦判据选择

在光学综合自动测量中 ,使用液晶显示屏作为分划板可以大大简化结构 ,提高效率 ,真正地实现自动测量。由于液晶显示具有对比度低、噪声大等特点 ,所以根据液晶的这些特点以及图像处理和CCD信号接收的特点选择两种适用的判据进行了分析和试验比较 ,并给出了结果。结果表明 ,这两种判别函数都适用于以液晶显示屏为目标和用图像处理方法进行光学参数测量的系统 ,其中锐度判别函数更优于信息熵判别函数 ,前者具有更好的抗干扰性和稳定性 ,而且其判定结果更接近目视清晰度判别     

Revêtements modérés et groupe fondamenttal de graphe de groupes

Let R be a discrete complete valuation ring, with algebraically closedresidue field. Let X be a semi-stable R-curve, with smooth generic fibre. In this paper we study tame coverings of X.