Siloxane-Based Nanobuilding Blocks by Reaction Between Silanediol and Trifunctional Silicon Alkoxides

The preparation of nanostructured organic-inorganic materials by assembling of nanobuilding blocks allows controlling the extent of phase interaction, which in its turn governs structure-properties relationships. We present here the synthesis of siloxane-based nanobuilding blocks prepared by reacting diphenylsilanediol with vinyltriethoxysilane and triethoxysilane. The reaction products were obtained by non-hydrolytic condensation between silanediol and ethoxide groups in inert atmosphere, in the presence of pyridine, triethylamine or butyl lithium. Different synthetic conditions were examined by means of ATR-FTIR and NMR spectroscopies, showing the formation of siloxane bonds. In the case of triethoxysilane the reaction carried out in the presence of pyridine leads to Si–H bond preservation in the final product. Air stable products with improved Si–O–Si hydrolytic stability can be obtained by removal of the base after the reaction completion. The condensation products can be described as a mixture of siloxane rings involving difunctional and trifunctional silicon units.     

The impedance behavior of the cell Au/HClO4 · 5.5 H2O/Au in the temperature range 4.2–300 K

The impedance of the cell Au/HClO₄-5.5 H₂O/Au was investigated in the frequency range 1 to 10⁵ Hz between 4.2 and 300 K. The analysis of the data enables an evaluation of important electrolyte properties such as conductivity and dielectric constant in a wide range of temperatures, predominantly in the solid state of the electrolyte HClO₄-5.5 H₂O (T_f = 228 K). The double layer capacity of the gold electrodes was also determined; it shows a qualitatively similar result compared with previous measurements. In the solid state, the ionic conductivity exhibits two distinct activation energies of 0.37 and 0.54 eV corresponding to the two phases present in HClO₄-5.5 H₂O above and below 170 K. Below 120 K the activation energy becomes very small and tends to zero around 80 K indicating possible tunneling processes in the rigid H₂O structure. At about the same temperature the dielectric constant reaches its low temperature limit with a value _∞ ≈ 11 which is considerably higher than the value of pure ice of _∞ ≈ 3.     

Novel P‐Stereogenic PCP Pincer‐Aryl Ruthenium(II) Complexes and Their Use in the Asymmetric Hydrogen Transfer Reaction of Acetophenone

Achiral P‐donor pincer‐aryl ruthenium complexes ([RuCl(PCP)(PPh₃)]) 4c , d were synthesized via transcyclometalation reactions by mixing equivalent amounts of [1,3‐phenylenebis(methylene)]bis[diisopropylphosphine] ( 2c ) or [1,3‐phenylenebis(methylene)]bis[diphenylphosphine] ( 2d ) and the N‐donor pincer‐aryl complex [RuCl{2,6‐(Me₂NCH₂)₂C₆H₃}(PPh₃)], ( 3 ; Scheme 2). The same synthetic procedure was successfully applied for the preparation of novel chiral P‐donor pincer‐aryl ruthenium complexes [RuCl(P*CP*)(PPh₃)] 4a , b by reacting P‐stereogenic pincer‐arenes (S,S)‐[1,3‐phenylenebis(methylene)]bis[(alkyl)(phenyl)phosphines] 2a , b (alkyl=ⁱPr or ^tBu, P*CHP*) and the complex [RuCl{2,6‐(Me₂NCH₂)₂C₆H₃}(PPh₃)], ( 3 ; Scheme 3). The crystal structures of achiral [RuCl(equation/tex2gif-sup-3.gifPCP)(PPh₃)] 4c and of chiral (S,S)‐[RuCl(equation/tex2gif-sup-6.gifPCP)(PPh₃)] 4a were determined by X‐ray diffraction (Fig. 3). Achiral [RuCl(PCP)(PPh₃)] complexes and chiral [RuCl(P*CP*)(PPh₃)] complexes were tested as catalyst in the H‐transfer reduction of acetophenone with propan‐2‐ol. With the chiral complexes, a modest enantioselectivity was obtained.     

Multimodal open-tubular capillary electrochromatographic analysis of amines and peptides

This study describes a comparison of different modes of open-tubular electrochromatography (OTCEC) in bare and etched capillaries. To carry out the investigation, the separation of impurities of two synthetic peptides and the separation of a mixture of five heterocyclic aromatic amines were studied. Three different types of stationary phase were evaluated: (i) fluorosurfactants (anionic and zwitterionic) adsorbed in the inner wall of the capillary (electrochromatography with dynamically modified stationary phases (DMS)CEC); (ii) physically adsorbed polymers (DMA-SO(3-) and DMA-N(+)(CH(3))(3)) and (iii) chemically modified capillaries (C(18), cholesteryl 10-undecanoate and diol). The results confirm that electrochromatography can be a viable alternative to capillary electrophoresis (CE) and liquid chromatography, more established separation techniques. It is possible to differentiate some minor species for the synthetic peptides that cannot be resolved by CE or high-performance liquid chromatography (HPLC). Moreover the separation of the amine mixture depends strongly on the stationary phase used.     

Simultaneous determination of solubility, dissolution and dilution enthalpies of a substance from a single calorimetric experiment

The thermodynamics of dissolution in water of a set of substances has been studied calorimetrically. The examined substances were: potassium chloride, (glycyl-glycyl)diketopiperazine, (alanyl-alanyl)diketopiperazine, (leucyl-glycyl)diketopiperazine. They were chosen on the basis of their solubilities, going from a highly soluble electrolyte to the sparingly soluble diketopiperazines. It is shown that, using a commercially available calorimeter, it is possible to perform in a single calorimetric experiment the simultaneous determination of all thermodynamic parameters characterizing dissolution of a substance in a given solvent, i.e. solubility, dissolution enthalpy and dilution enthalpy. The solubility values in water obtained through the proposed method are in good agreement with those reported in the literature and obtained by other techniques.     

催化膜和催化膜反应器:整合的高效和环保催化过程

 The design of new heterogeneous photooxygenation systems able to employ visible light, oxygen, mild temperatures, and solvent with a low environmental impact has been investigated. In particular, the heterogenization of decatungstate (W10O4-32), a polyoxometalate with photocatalytic activity in oxidation reactions, has been carried out in polymeric membranes of polyvinylidenefluoride. The polymeric catalytic membranes prepared by phase inversion technique have been successfully applied in the aerobic mineralization of phenol in water, which was used as an example of organic pollutant. In order to evaluate the effect of the polymeric environment on the overall catalyst behavior, we have also heterogenized the decatungstate (opportunely functionalized) in perfluorinated membrane made of Hyflon. The photocatalytic composite membranes are characterized by different and tuneable properties depending on the nature of the polymeric micro-environment, in which the catalyst is confined. Moreover, the selective separation function of the membrane results in enhanced performance in comparison with homogeneous reactions.     

Determination of mazindol in human oral fluid by high performance liquid chromatography–electrospray ionization mass spectrometry

Brazil is one of the countries most affected by abuse of stimulant medications by professional drivers, especially fenproporex, amfepramone and mazindol. Even though their sale is banned, they can be found in illegal markets, such as those located on the country's borders. The use of oral fluid to monitor drug levels has many advantages over plasma and urine because it is noninvasive, easier to collect and more difficult to adulterate. The aim of this study was to develop and validate a sensitive and specific method to quantify mazindol in human oral fluid by liquid chromatography–mass spectrometry (LC‐MS). The LC system consisted of an LC‐MS system operated in selected ion monitoring mode. The mobile phase was composed of water at pH 4.0, acetonitrile and methanol (60:15:25 v/v/v) at a flow rate of 1.0 mL/min and propranolol was used as internal standard. Total running time was 10 min. The lower limit of quantification was 0.2 ng/mL and the method exhibited good linearity within the 0.2–20 ng/mL range (r = 0.9987). A rapid, specific, sensitive, linear, precise and accurate method was developed for determination of mazindol in human oral fluid according to European Medicines Agency guidelines, and is suitable for monitoring mazindol levels in oral fluid of professional drivers. Copyright © 2014 John Wiley & Sons, Ltd.     

Calorimetric, conductometric and density measurements of iteratively filtered water using 450, 200, 100 and 25 nm Millipore filters

This study presents some experimental results on the variation of the physico-chemical properties of pure MilliQ water, when subjected to a procedure of iterated filtration through Millipore filters with porosity ranging from 450 to 25 nm. The parameters measured were: calorimetry, electrical conductivity, density, and pH. Release of chemical impurities can be ruled out due to the nature of the materials used. As in the case of iteratively filtered water prepared using Pyrex glass filters, the specific electrical conductivity and the pH were found to increase with increasing number of iterations. There was also a dependence on the average pore size of the filters. The idea of water as a system capable of self-organization triggered by various perturbations (mechanical and/or electromagnetic) is gaining momentum. It responds to such perturbations by forming dissipative structures, i.e., far-from-equilibrium systems.     

Surfactant Hydrogels for the Dispersion of Carbon‐Nanotube‐Based Catalysts

Novel hydrogel phases based on positively charged and zwitterionic surfactants, namely, N‐[p‐(n‐dodecyloxybenzyl)]‐N,N,N‐trimethylammonium bromide (pDOTABr) and p‐dodecyloxybenzyldimethylamine oxide (pDOAO), which combine pristine carbon nanotubes (CNTs), were obtained, thus leading to stable dispersions and enhanced cross‐linked networks. The composite hydrogel featuring a well‐defined nanostructured morphology and an overall positively charged surface was shown to efficiently immobilise a polyanionic and redox‐active tetraruthenium‐substituted polyoxometalate (Ru₄POM) by complementary charge interactions. The resulting hybrid gel has been characterised by electron microscopy techniques, whereas the electrostatic‐directed assembly has been monitored by means of fluorescence spectroscopy and ζ‐potential tests. This protocol offers a straightforward supramolecular strategy for the design of novel aqueous‐based electrocatalytic soft materials, thereby improving the processability of CNTs while tuning their interfacial decoration with multiple catalytic domains. Electrochemical evidence confirms that the activity of the catalyst is preserved within the gel media.