Generic Transport Aft-body Drag Reduction using Active Flow Control

Active flow-separation control is an effective and efficient mean for drag reduction and unsteady load alleviation resulting from locally or massively separated flow. Such a situation occurs in configurations where the aerodynamic performance is of secondary importance to functionality. The performance of heavy transport helicopters and aeroplanes, having a large, and almost flat, aft loading ramp suffer from the poor aerodynamics of the aft body. Hence, a combined experimental and numerical investigation was undertaken on a generic transport aeroplane/helicopter configuration. The experimental study provided surface pressures, direct drag measurements, surface and smoke flow visualization. The baseline flow was numerically analyzed, using finite volume solutions of the RANS equations. The baseline flow around the model was insensitive to the Reynolds number in the range it was tested. The flow separating from the aft body was characterized by two main sources of drag and unsteadiness. The first is a separation bubble residing at the lower ramp corner and the second is a pair of vortex systems developing and separating from the sides of the ramp. As the model incidence is decreased, the pair of vortex systems also penetrates deeper towards the centerline of the ramp, decreasing the pressure and increasing the drag. As expected, the ramp lower corner bubble was highly receptive to periodic excitation introduced from four addressable piezo-fluidic actuators situated at the ramp lower corner. Total drag was reduced by 3–11%, depending on the model incidence. There are indications that the flow in the wake of the model is also significantly steadier when the bubble at the lower ramp corner is eliminated. The vortex system is tighter and steadier when the ramp-corner bubble is eliminated.     

Thermal characterization of social vespid silk

In this paper we try to establish a link between the microclimate in the wasp nest and the structure and thermal stability of vespid silk. We suggest that there are at least two types of water that is absorbed by the silk of Oriental hornets, namely, surface water and intrinsic structural water. The release of both types of water was found to be reversible. The enthalpy values of the endothermic peaks associated with the release of water from different silk samples do not differ substantially and are in the range of 106 to 130 J g^-1 for the Vespa orientalis male larvae silk (sample #1), Paravespula germanica (yellowjacket) worker larvae silk (#3) and Vespa orientalis nest envelope(#4). For the Vespa orientalis worker larvae silk (sample #2), however, it is twice as large (228 J g^-1). This is in agreement with the increased total amount of absorbed water. The silk studied has a fibrilar structure with interconnecting surfaces overlying entire regions. It is assumed that the initial water loss stems from water evaporation from the coat of the fibers - a daily occurrence in the hornets' nest. Heating to above 70°C may result in structural changes in the silk core. This revised version was published online in July 2006 with corrections to the Cover Date.     

Conformation of bicyclo [n.1.0] Derivatives: Part 3. Dioxa- and trioxa-bicyclo[5.1.0] octanes

The conformational geometries and possible interconversion paths for some oxa derivatives of bicyclo[5.1.0] octane have been studied by the molecular mechanics method. The theoretical results are compared with the experimental data for the molecular geometry of bicyclo[5.1.0] octane and 3,5,8-trioxabicyclo[5.1.0] octane, the free energy of activation for cycloheptene epoxide and 3,5-dioxabicyclo[5.1.0] octane, the dipole moments and molar Kerr constants in solution for cycloheptene epoxide, 3,5-dioxa- and 3,5,8-trioxabicyclo[5.1.0] octane.     

Antiparallel triple helices. Structural characteristics and stabilization by 8-amino derivatives

The structural, dynamical, and recognition properties of antiparallel DNA triplexes formed by the antiparallel d(G#G.C), d(A#A.T), and d(T#A.T) motifs (the pound sign and dot mean reverse-Hoogsteen and Watson-Crick hydrogen bonds, respectively) are studied by means of "state of the art" molecular dynamics simulations. Once the characteristics of the helix are defined, molecular dynamics and thermodynamic integration calculations are used to determine the expected stabilization of the antiparallel triplex caused by the introduction of 8-aminopurines. Finally, oligonucleotides containing 8-aminopurine derivatives are synthesized and tested experimentally using several approaches in a variety of systems. A very large stabilization of the triplex is found experimentally, as predicted by simulations. These results open the possibility for the use of oligonucleotides carrying 8-aminopurines to bind single-stranded nucleic acids by formation of antiparallel triplexes.     

Structural investigation of high-valent manganese-salen complexes by UV/Vis,Raman, XANES,and EXAFS spectroscopy

XANES and EXAFS spectroscopic studies at the Mn-K- and Br-K-edge of reaction products of (S,S)-(+)-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediaminomanganese(III) chloride ([(salen)Mn(III)Cl], 1) and (S,S)-(+)-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediaminomanganese(III) bromide ([(salen)Mn(III)Br], 2) with 4-phenylpyridine N-oxide (4-PPNO) and 3-chloroperoxybenzoic acid (MCPBA) are reported. The reaction of the Mn(III) complexes with two equivalents of 4-PPNO leads to a hexacoordinated compound, in which the manganese atom is octahedrally coordinated by four oxygen/nitrogen atoms of the salen ligand at an average distance of approximately 1.90 A and two additional, axially bonded oxygen atoms of the 4-PPNO at 2.25 A. The oxidation state of this complex was determined as approximately +IV by a comparative study of Mn(III) and Mn(V) reference compounds. The green intermediate obtained in reactions of MCPBA and solutions of 1 or 2 in acetonitrile was investigated with XANES, EXAFS, UV/Vis, and Raman spectroscopy, and an increase of the coordination number of the manganese atoms from 4 to 5 and the complete abstraction of the halide was observed. A formal oxidation state of IV was deduced from the relative position of the pre-edge 1s-->3d feature of the X-ray absorption spectrum of the complex. The broad UV/Vis band of this complex in acetonitrile with lambda(max)=648 nm was consistent with a radical cation structure, in which a MCPBA molecule was bound to the Mn(IV) central atom. An oxomanganese(V) or a dimeric manganese(IV) species was not detected.     

Unusual and unexpected reactivity of t-butyl dicarbonate (Boc2O) with alcohols in the presence of magnesium perchlorate. A new and general route to t-butyl ethers

[reaction: see text] A new mild method for protecting alcohols as t-butyl ethers is reported. The reaction proceeds with Mg(ClO4)2 and Boc2O and shows general applicability. The deprotection of t-butyl ethers has also been revisited. Preliminary results indicate the CeCl3 x 7H2O/NaI system is a very suitable catalyst for their removal.     

Method validation for detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate

A European interlaboratory study was conducted to validate an analytical procedure for the detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate. In principle, the fat obtained from plain chocolate according to the Soxhlet principle is separated by high-resolution capillary gas chromatography into triacylglycerol fractions according to their acyl-C-numbers, and within a given number, also according to unsaturation. The presence of cocoa butter equivalents is detected by linear regression analysis applied to the relative proportions of the 3 main triacylglycerol fractions of the fat analyzed. The amount of the cocoa butter equivalent admixture is estimated by partial least-squares regression analysis applied to the relative proportions of the 5 main triacylglycerols. Cocoa butter equivalent admixtures were detected down to a level of 2% related to the fat phase, corresponding to 0.6% in chocolate (assumed fat content of chocolate, 30%), without false-positive or -negative results. By using a quantification model based on partial least-squares regression analysis, the predicted cocoa butter equivalent amounts were in close agreement with the actual values. The applied model performed well at the level of the statutory limit of 5% cocoa butter equivalent addition to chocolate with a prediction error of 0.6%, assuming a chocolate fat content of 30%.     

Detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate by gas liquid chromatography of triacylglycerols

The development and in-house testing of a method for the detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate is described. A database consisting of the triacylglycerol profile of 74 genuine cocoa butter and 75 cocoa butter equivalent samples obtained by high-resolution capillary gas liquid chromatography was created, using a certified cocoa butter reference material (IRMM-801) for calibration purposes. Based on these data, a large number of cocoa butter/cocoa butter equivalent mixtures were arithmetically simulated. By subjecting the data set to various statistical tools, reliable models for both detection (univariate regression model) and quantification (multivariate model) were elaborated. Validation data sets consisting of a large number of samples (n = 4050 for detection, n = 1050 for quantification) were used to test the models. Excluding pure illipé fat samples from the data set, the detection limit was determined between 1 and 3% foreign fat in cocoa butter. Recalculated for a chocolate with a fat content of 30%, these figures are equal to 0.3-0.9% cocoa butter equivalent. For quantification, the average error for prediction was estimated to be 1.1% cocoa butter equivalent in cocoa butter, without prior knowledge of the materials used in the blend corresponding to 0.3% in chocolate (fat content 30%). The advantage of the approach is that by using IRMM-801 for calibration, the established mathematical decision rules can be transferred to every testing laboratory.