Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Solution-assisted assembly of organic semiconducting single crystals on surfaces with patterned wettability

Two efficient approaches to assembling organic semiconducting single crystals are described. The methods rely on solvent wetting and dewetting on substrates with patterned wettability to selectively direct the deposition or removal of organic crystals. Substrates were functionalized with different self-assembled monolayers (SAMs) to achieve the desired wettabilities. The assembly of different organic crystals over centimeter-squared areas on Au, SiO2, and flexible plastic substrates was demonstrated. By designing line features on the substrate, the alignment of crystals, such as CuPc needles, was also achieved. As a demonstration of the potential application of this assembly approach, arrays of single-crystal organic field-effect transistors were fabricated by patterning organic single crystals directly onto and between transistor source and drain electrodes.     

Application of fluid opacity for determining the phase behavior of binary mixtures near their critical loci – CO2 plus ethane and CO2 plus propane

The rapid determination of critical data of binary mixtures of carbon dioxide plus propane and carbon dioxide plus ethane has been carried out using the opalescence effect of pure substances or mixtures near their critical loci. The experiments have been performed applying a heatable stainless-steel vessel equipped with two sapphire windows for optical observation of changes of state. The initial two-phase mixture is continuously heated and pressurized. The vessel content increasingly becomes opalescent and the critical point is characterized by a total opacity. Beyond this point the fluid instantly becomes clear; the one-phase supercritical state is reached. Received: 17 December / Revised: 24 February 1999 / Accepted: 26 February 1999     

Line-on-line coincidence: a new type of epitaxy found in organic-organic heterolayers

We propose a new type of epitaxy, line-on-line coincidence (LOL), which explains the ordering in the organic-organic heterolayer system PTCDA on HBC on graphite. LOL epitaxy is similar to point-on-line coincidence (POL) in the sense that all overlayer molecules lie on parallel, equally spaced lines. The key difference to POL is that these lines are not restricted to primitive lattice lines of the substrate lattice. Potential energy calculations demonstrate that this new type of epitaxy is indeed characterized by a minimum in the overlayer-substrate interaction potential.     

Magnetoelectric effect in cobalt ferrite-barium titanate composites and their electrical properties

CoFe₂O₄-BaTiO₃ composites were prepared using conventional ceramic double sintering process with various compositions. Presence of two phases in the composites was confirmed using X-ray diffraction. The dc resistivity and thermoemf as a function of temperature in the temperature range 300 K to 600 K were measured. Variation of dielectric constant (ɛ′) with frequency in the range 100 Hz to 1 MHz and also with temperature at a fixed frequency of 1 kHz was studied. The ac conductivity was derived from dielectric constant (ɛ′) and loss tangent (tan δ). The nature of conduction is discussed on the basis of small polaron hopping model. The static value of magnetoelectric conversion factor has been studied as a function of magnetic field.     

Energy dependence of multiplicity in proton-nucleus collisions and models of multiparticle production

This is a continuation of our earlier investigation (Gurtuet al 1974Phys. Lett. 50 B 391) on multiparticle production in proton-nucleus collisions based on an exposure of emulsion stack to 200 GeV/c beam at the NAL. It is found that the ratioR _em = 〈n _s〉/〈n _ch〉, where 〈n _ch〉 is the charged particle multiplicity in pp-collisions, increases slowly from about 1 at 10 GeV/c to 1·6 at 68 GeV/c and attains a constant value of 1·71 ± 0·04 in the region 200 to 8000 GeV/c. Furthermore,R _em = 1·71 implies an effectiveA-dependence ofR _A =A ^0.18,i.e., a very weak dependence. Predictions ofR _em on various models are discussed and compared with the emulsion data. Data seem to favour models of hadron-nucleon collisions in which production of particles takes place through adouble step mechanism,e.g., diffractive excitation, hydrodynamical and energy flux cascade as opposed to models which envisage instantaneous production.     

Thin film structure of tetraceno[2,3-b]thiophene characterized by grazing incidence X-ray scattering and near-edge X-ray absorption fine structure analysis

Understanding the structure-property relationship for organic semiconductors is crucial in rational molecular design and organic thin film process control. Charge carrier transport in organic field-effect transistors predominantly occurs in a few semiconductor layers close to the interface in contact with the dielectric layer, and the transport properties depend sensitively on the precise molecular packing. Therefore, a better understanding of the impact of molecular packing and thin film morphology in the first few monolayers above the dielectric layer on charge transport is needed to improve the transistor performance. In this Article, we show that the detailed molecular packing in thin organic semiconductor films can be solved through a combination of grazing incidence X-ray diffraction (GIXD), near-edge X-ray absorption spectra fine structure (NEXAFS) spectroscopy, energy minimization packing calculations, and structure refinement of the diffraction data. We solve the thin film structure for 2 and 20 nm thick films of tetraceno[2,3-b]thiophene and detect only a single phase for these thicknesses. The GIXD yields accurate unit cell dimensions, while the precise molecular arrangement in the unit cell was found from the energy minimization and structure refinement; the NEXAFS yields a consistent molecular tilt. For the 20 nm film, the unit cell is triclinic with a = 5.96 A, b = 7.71 A, c = 15.16 A, alpha = 97.30 degrees, beta = 95.63 degrees, gamma = 90 degrees; there are two molecules per unit cell with herringbone packing (49-59 degree angle) and tilted about 7 degrees from the substrate normal. The thin film structure is significantly different from the bulk single-crystal structure, indicating the importance of characterizing thin film to correlate with thin film device performance. The results are compared to the corresponding data for the chemically similar and widely used pentacene. Possible effects of the observed thin film structure and morphology on charge carrier mobility are discussed.     

News and Views: Major European Light Sources Join Forces in the ERF

Synchrotron-based X-ray scattering (SR-XRS) techniques offer the ability to probe nano- and atomic-scale structures that dictate the properties of advanced technological and environmental materials. Important materials studied at the Stanford Synchrotron Radiation Lightsource (SSRL) include organic and inorganic thin films and interfaces, nanoparticles, complex oxides, solutions, polymers, minerals, and poorly crystalline materials. Good planning and a good working knowledge of beamlines and techniques are required to successfully conduct SR-XRS measurements. This sixth annual School at SSRL on Synchrotron X-ray Scattering Techniques in Materials and Environmental Sciences was held at the SLAC National Accelerator Laboratory on May 29-31, 2012, and provided a practical users' guide to planning and conducting scattering measurements at SSRL beam lines. There was an emphasis on information that cannot be found in textbooks. More than 50 researchers, mostly graduate students and postdoctoral associates, participated in this workshop. Attendees represented a variety of fields including material sciences, chemical engineering, applied physics, chemistry and earth sciences.     

Working group report: Heavy-ion physics and quark-gluon plasma

This is the report of Heavy Ion Physics and Quark-Gluon Plasma at WHEPP-09 which was part of Working Group-4. Discussion and work on some aspects of quark-gluon plasma believed to have created in heavy-ion collisions and in early Universe are reported.