Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Assessment of the Formant Frequencies in Normal and Laryngectomized Individuals Using Linear Predictive Coding

The objective of this study was to assess the difference in voice quality as defined by acoustical analysis using sustained vowel in laryngectomized patients in comparison with normal volunteers. This was designed as a retrospective single center cohort study. An adult tertiary referral unit formed the setting of this study. Fifty patients (40 males) who underwent total laryngectomy and 31 normal volunteers (18 male) participated. Group comparisons with the first three formant frequencies (F1, F2, and F3) using linear predictive coding (LPC) (Laryngograph Ltd, London, UK) was performed. The existence of any significant difference of F1, F2, and F3 between the two groups using the sustained vowel /i/ and the effects of other factors namely, tumor stage (T), chemoradiotherapy, pharyngectomy, cricothyroid myotomy, closure of pharyngoesophageal segment, and postoperative complication were analyzed. Formant frequencies F1, F2, and F3 were significantly different in male laryngectomees compared to controls: F1 (P<0.001, Mann-Whitney U test), F2 (P<0.001, Student's t test), and F3 (P=0.008, Student's t test). There was no significant difference between females in both groups for all three formant frequencies. Chemoradiotherapy and postoperative complications (pharyngocutaneous fistula) caused a significantly lower formant F1 in men, but showed little effect in F2 and F3. Laryngectomized males produced significantly higher formant frequencies, F1, F2, and F3, compared to normal volunteers, and this is consistent with literature. Chemoradiotherapy and postoperative complications significantly influenced the formant scores in the laryngectomee population. This study shows that robust and reliable data could be obtained using electroglottography and LPC in normal volunteers and laryngectomees using a sustained vowel.     

A simple and sensitive analytical method for the determination of antimony in environmental and biological samples.

The results of a study and application of leucocrystal violet for the determination of antimony in parts per million levels is described here. The proposed method is based on the reaction of antimony(III) with acidified potassium iodate to liberate iodine. The liberated iodine selectively oxidizes leucocrystal violet to crystal violet dye. The formed dye shows maximum absorbance at 590 nm. The color system obeys Beer's law in the concentration range from 0.4 - 3.6 microg antimony per 25 ml of final solution. The molar absorptivity and Sandell's sensitivity were found to be 7.32 x 10(5) l mol(-1) cm(-1) and 0.0016 microg cm(-2), respectively. All variables were studied in order to optimize the reaction. The proposed method is satisfactorily applicable for the analysis of antimony in various environmental and biological samples. The method is simple, highly sensitive, accurate and reliable.     

Carbon nanohorns grown from ruthenium nanoparticles

A nanoscale ruthenium/gold bimetallic cluster of clusters has been used as a molecular precursor to produce pure ruthenium nanoparticles (seeds) as catalysts for the growth of carbon nanohorns (CNHs).     

Effect of Enzyme Modification of Corn Grits on their Properties as an Adsorbent in a Skarstrom Pressure Swing Cycle Dryer

Corn grits have been tested as a desiccant in a pressure swing adsorption (PSA) system to produce dry air. Two sizes of unmodified corn grits were tested in the PSA system: 2.16 and 0.978 mm in diameter, which dried moist air to dew points of –42°C and –69°C, respectively. A modification technology has been developed for the corn grits that gives an increase in the operational adsorptive capacity in a pressure swing adsorption system, so that they remove as much moisture from air as molecular sieves at the same conditions. After modification, 2.16 mm corn grits dry moist air to a –56°C dew point and the 0.978 mm corn grits dry air to a –80°C dew point. The modification process creates surface modifications on the corn grits apparently making more adsorption sites easily available. The modification procedure increases the specific surface area of the grits and possibly decreases the crystallinity, which would make more hydroxyl groups available for adsorption of water. Possible applications of using corn grits in the pressure swing adsorption system include industrial gas dryers, sorptive cooling air conditioners, and recycling equipment for industrial solvents.     

Differential thermal and thermogravimetric analyses of bound water content in cellulosic substrates and its significance during cellulose hydrolysis by alkaline active fungal cellulases

Various cellulosic substrates were examined for bound water content by differential thermal analysis (DTA) and thermogravimetry (TG). Samples were heated in the range of 30-100 degrees C at a rate of 3 degrees C/min. DTA vaporization curves for different cellulose samples indicated that the bound water (Wf) was vaporized at higher temperature than free water (Wf) at the surface. Weight loss was observed in two stages, corresponding to Wf and Wb in TG curves. The bound water content was dependent on the degree of crystallinity of cellulose. Among different cellulosic substrates, Walseth cellulose showed the highest bound water content, and it also was found to be the least crystalline. The alkaline-active, alkali-stable cellulase was obtained from the alkalotolerant Fusarium sp. The substrate specificity and viscometric characteristics confirmed the enzyme to be an endoglucanase. The Wb content of Walseth cellulose was lowered during the enzymatic hydrolysis. The possible application of bound water analysis in understanding the hydrolysis of cellulosic substrates of different crystallinity is discussed.     

Validation of LC/MS electrospray ionisation method for the estimation of ursodiol in human plasma and its application in bioequivalence study

A novel High Performance Liquid Chromatography-electrospray mass spectrometric method has been developed for the estimation of Ursodiol (Ursodeoxycholic acid)--a bile acid, in human plasma using Ornidazole as internal standard. The methodology involved solid phase extraction of the analyte from human plasma matrix. The chromatographic separation was achieved within seven minutes by an isocratic mobile phase containing 1.0 mM ammonium acetate and Acetonitrile (65:35, v/v), flowing through XTerra MS C18, 100 x 2.1, 3.5 microm analytical column, at a flow rate of 0.2 ml/min. Ion signals were measured in negative mode for Ursodiol and internal standard at m/z 391.3 and 278.1, respectively. A detailed validation of the method was performed as per USFDA guidelines and the standard curves were found to be linear in the range 50.0 ng/ml to 3000.0 ng/ml with the mean correlation coefficient more than 0.99. The absolute recovery was more than 54.90% for Ursodiol and 76.51% for internal standard. Ursodiol was stable for sixty-nine days at -70 degrees C and for eight hours at ambient temperature. After extraction from plasma, the reconstituted samples of Ursodiol were stable in autosampler at 10 degrees C for forty-eight hours. Upon subjecting to three freeze thaw cycles, there was no change in the recovery of the analyte. The integrity of the plasma samples remained unaffected even upon four-fold dilution with drug free human plasma. The method was simple, specific, sensitive, precise, accurate and suitable for bioequivalence and pharmacokinetic studies. It was successfully applied to the pilot bioequivalence study of Ursodiol in male human subjects.     

An innovative synthesis of dibenzofurans through a carbanion-induced ring transformation reaction

An innovative route for the synthesis of substituted dibenzofurans has been delineated through a ring transformation reaction of suitably functionalized 2H-pyran-2-ones by reaction with 7-methoxybenzofuran-3-one, in high yield. The novelty of the procedure lies in the creation of an aromatic ring from a 2H-pyran-2-one involving the -COCH₂-moiety of the substrate.     

Rapid shear viscosity calculation by momentum impulse relaxation molecular dynamics

Recently, Arya et al. [J. Chem. Phys. 113, 2079 (2000)] introduced a new molecular dynamics method to rapidly compute the viscosity of fluids. The technique, termed momentum impulse relaxation (MIR), involves the imposition of a Gaussian velocity profile on an equilibrated system, after which the decay in the profile is monitored as a function of time. The shear viscosity is computed by matching the rate of decay of the velocity profile to the corresponding solution of the Navier-Stokes equation. The method was originally applied to simple systems (argon and n-butane) and found to give a comparable accuracy to conventional equilibrium and nonequilibrium methods with more than an order of magnitude reduction in computing time. In this work, we extend and generalize the method to examine larger molecules with higher viscosities than have been examined previously. A detailed analysis of the method is given, including the effect the velocity boundary conditions have on the viscosity, the sensitivity of the results to the velocity profile fitting procedure, the effect of preequilibration of the Gaussian profile, and the effect the system size and box shape have on the accuracy and speed of the method. It is shown that the MIR method can be extended to treat multiatom systems without loss of accuracy or computational efficiency.