Crosslinked poly(ethylene oxide) containing siloxanes fabricated through thiol‐ene photochemistry

Homogenous amphiphilic crosslinked polymer films comprising of poly(ethylene oxide) and polysiloxane were synthesized utilizing thiol‐ene “ click ” photochemistry. A systematic variation in polymer composition was Carried out to obtain high quality films with varied amount of siloxane and poly(ethylene oxide). These films showed improved gas separation performance with high gas permeabilities with good CO₂/N₂ selectivity. Furthermore, the resulting films were also tested for its biocompatibility, as a carrier media which allow human adult mesenchymal stem cells to retain their capacity for osteoblastic differentiation after transplantation. The obtained crosslinked films were characterized using differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, FTIR, Raman‐IR , and small angle X‐ray scattering. The synthesis ease and commercial availability of the starting materials suggests that these new crosslinked polymer networks could find applications in wide range of applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1548–1557     

Dually responsive multiblock copolymers via RAFT polymerization: Synthesis of temperature- and redox-responsive copolymers of PNIPAM and PDMAEMA

We report synthesis of temperature- and redox-responsive multiblock copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined α,ω-bis(dithioester)-functionalized poly(N-isopropylacrylamide) (PNIPAM) and poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared using 1,4-bis(thiobenzoylthiomethyl)benzene and 1,4-bis(2-(thiobenzoylthio)prop-2-yl)benzene as RAFT agents, respectively. Dually responsive multiblock copolymers were synthesized in a single aminolysis/oxidation step from the α,ω-bis(dithioester)-terminated PNIPAM and PDMAEMA. The copolymers and their stimulus-responsive behavior were characterized by size exclusion chromatography, NMR, light scattering and atomic force microscopy. Due to the presence of redox-sensitive disulfide bonds between the blocks, the copolymers were readily reduced to the starting polymer blocks. The presence of temperature-responsive PNIPAM blocks provided the copolymers with the ability to assemble into core-shell nanostructures with hydrophobic PNIPAM as a core and cationic PDMAEMA as stabilizing shell when above the phase transition temperatures of PNIPAM. The temperature-induced assembly of the copolymers also showed substantial pH sensitivity. The phase transition temperature increased with decreasing pH, while molecular weight of the assemblies decreased.     

Green Synthesis and Characterization of Hybrid Collagen–Cellulose–Albumin Biofibers from Skin Waste

Collagen (C) and cellulose are prominent biopolymers from the animal and plant kingdom and widely used in bioengineering. Albumin, on the other hand, is the most abundant plasma protein present in mammalian blood. In this work, collagen extracted from animal skin waste was blended with hydroxyethyl cellulose (HEC) and bovine serum albumin (A) and wet-spun to form hybrid biodegradable C/HEC/A fibers. They were further cross-linked with glutaraldehyde vapors and analyzed. X-ray diffraction and infra-red spectroscopic studies of the hybrid fibers display peaks corresponding to collagen, cellulose, and albumin. Incorporation of cellulose into the biopolymeric matrix leads to a reasonable improvement in mechanical, swelling, and thermal properties of hybrid fibers. Addition of albumin improves the regularity of fiber surface without altering the porosity as observed under a microscope. Hence, the formed hybrid biofibers can be potentially used as a suture material as well as for different biomedical applications due to their improved properties.     

Role of compositional changes on thermal,magnetic,and mechanical properties of Fe-P-C-based amorphous alloys

This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.     

Novel Synthesis of (E)-3-Arylidene-2,3-dihydrobenzo[b][1,4]oxazepin-4(5H)-ones Using Baylis–Hillman Derivatives via Reductive Cyclization

A simple synthesis of novel (E)-3-arylidene-2,3-dihydrobenzo[b][1,4]oxazepin-4(5H)-ones from bromides of the Baylis--Hillman adducts using Fe/AcOH for the in situ reduction of nitro group, into an amino group, followed by the cyclization as a key step, has been described.     

Can Low‐Valent Germanium Chemistry Be Practiced Under Ambient Conditions? A Tale of a Water‐Stable Yet Reactive Germylene Monochloride Complex

A germylene monochloride complex ((DPM)GeCl, 1 ) that is water stable was isolated for the first time. Interestingly, it reacts with cesium fluoride under ambient conditions (non‐inert atmosphere and water‐containing solvent) to afford water stable germylene monofluoride complex ((DPM)GeF, 2 ). Due to the usage of DPM (dipyrrinate) ligand, germylene monohalides 1 and 2 show fluorescence in the visible region at 555 and 538 nm, respectively. Compounds 1 and 2 are the first fluorescent germylene complexes and were characterized by multinuclear NMR spectroscopy. The structure of compound 1 was also proved by single crystal X‐ray diffraction studies.     

Optical and redox properties of a series of 3,4-ethylenedioxythiophene oligomers

The optical and redox properties of a series of 3,4-ethylenedioxythiophene oligomers (EDOTn, n=1-4) and their beta,beta'-unsubstituted analogues (Tn, n=1-4) are described. Both series are end capped with phenyl groups to prevent irreversible alpha-coupling reactions during oxidative doping. Absorption and fluorescence spectra of both series reveal a significantly higher degree of intrachain conformational order in the EDOTn oligomers. Oxidation potentials (E(PA1) and E(PA2)) determined by cyclic voltammetry reveal that those of EDOTn are significantly lower than the corresponding Tn oligomers as a consequence of the electron-donating 3,4-ethylenedioxy substitution. Linear fits of E(PA1) and E(PA2) versus the reciprocal number of double bonds reveal significantly steeper slopes for the EDOTn than for the Tn oligomers. This could indicate a more effective conjugation for the EDOTn series, confirmed by the fact that coalescence of E(PA1) and E(PA2) is reached already at relatively short chain lengths ( approximately 5 EDOT units) in contrast to the Tn series (>10 thiophene units). The stepwise chemical oxidation of the EDOTn and Tn oligomers in solution was carried out to obtain radical cations and dications. The energies of the optical transitions of the radical cations and dications as determined by UV/Vis/NIR spectroscopy were similar for the two series. These spectroscopic observations are consistent with quantum-chemical calculations performed on the singly charged molecules. Cooling solutions containing T2.+, T3.+, EDOT2.+, and EDOT3.+ revealed the reversible formation of dimers, albeit with a somewhat different tendency, expressed in the values for the dimerization enthalpy.     

Enhanced intravenous transgene expression in mouse lung using cyclic-head cationic lipids

Herein, we report enhanced intravenous mouse lung transfection using novel cyclic-head-group analogs of usually open-head cationic transfection lipids. Design and synthesis of the new cyclic-head lipid N,N-di-n-tetradecyl-3,4-dihydroxy-pyrrolidinium chloride (lipid 1) and its higher alkyl-chain analogs (lipids 2-4) and relative in vitro and in vivo gene transfer efficacies of cyclic-head lipids 1-4 to their corresponding open-head analogs [lipid 5, namely N,N-di-n-tetradecyl-N,N-(2-hydroxyethyl)ammonium chloride and its higher alkyl-chain analogs, lipids 6-8] have been described. In stark contrast to comparable in vitro transfection efficacies of both the cyclic- and open-head lipids, lipids 1-4 with cyclic heads were found to be significantly more efficient (by 5- to 11-fold) in transfecting mouse lung than their corresponding open-head analogs (5-8) upon intravenous administration. The cyclic-head lipid 3 with di-stearyl hydrophobic tail was found to be the most promising for future applications.     

Introduction of bis-discotic and bis-calamitic mesogenic addends to C 60

The synthesis and characterization of four C 60 Bingel cyclopropanation adducts incorporating bis-biphenylene (three adducts) and bis-triphenylene (one adduct) moieties are described. The thermal analysis (POM and DSC) of these materials reveals that they are not liquid crystalline. However, two of the precursor bis-biphenylene malonate esters possess monotropic mesophases. Furthermore, each of the corresponding C 60 adducts is miscible in the melts of the precursor malonate ester, and at low dopings, retains the liquid crystalline monotropic mesophases of the precursor.