Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Theoretical investigation of the molecular structure,vibrational spectra,and molecular docking of tramadol using density functional theory

The optimized molecular structures, harmonic vibrational wavenumbers, and the corresponding vibrational assignments of (1S,2S)-tramadol and (1R,2R)-tramadol are computationally examined using the B3LYP density functional theory method together with the standard 6–311++G(d,p) and def2-TVZP basis sets. The optimized structures show that phenolic rings of both 1R,2R and 1S,2S tramadol adopt planar geometry, which are slightly distorted due to the substitution at the meta-position; and the six-membered cyclohexane adopts a slightly distorted chair conformation. The 1S,2S enantiomer is energetically more favorable than 1R,2R with the energy differences of 1.32 and 1.03 kcal/mol obtained at B3LYP/6–311++G(d,p) and B3LYP/Def2-TVZP levels, respectively. The analysis of the binding pocket in the silico molecular docking with the m-opioid receptor shows that it originated two clusters with the 1S,2S enantiomer and one cluster with the 1R,2R enantiomer of tramadol. The results point to a more stable complex of the m-opioid receptor with the 1R,2R enantiomer of tramadol.     

Parallel synthesis and high throughput dissolution testing of biodegradable polyanhydride copolymers

We have demonstrated that polycondensation reactions can be carried out in a combinatorial fashion and that the polymer library can be screened at high throughput using a rapid prototyping technique to fabricate multiwell substrates. A linearly varying compositional library of 100 different biodegradable polyanhydride random copolymers that are promising carriers for controlled drug delivery was designed, fabricated, and characterized by IR microscopy within a few hours. The polyanhydride copolymer library was based on 1,6-bis(p-carboxyphenoxy)hexane (CPH) and sebacic anhydride (SA) and was characterized with infrared microspectroscopy to determine the composition within each well. Since degradation and release rates depend on copolymer composition, we also developed new high-throughput methods to investigate drug release from this library of copolymers by designing specific wells for each task. A subset of this library was chosen, and a substrate was designed and fabricated to enable the synthesis and monitoring of dye dissolution from a range of polyanhydride copolymers in a parallel fashion using a CCD camera. Multisample substrates were fabricated with a novel rapid prototyping method that consists of an organic solvent-resistant array of 10 x 10 microwells of 2-muL volume each. The libraries were deposited with a custom-built liquid dispensing system consisting of a series of computer-controlled volume-dispensing pumps and XYZ motion stages. The parallel dye dissolution study displayed a decreasing rate of release with increasing CPH content. This result agrees with previously published data for dye release from poly(CPH-co-SA) copolymers. The methodology described in this work is amenable to numerous applications in the arenas of high-throughput polymer synthesis and characterization.     

Low temperature survival of slender naiad (Najas flexilis) seeds

The response to drying and storage at -20 degrees C or in liquid nitrogen was studied in seeds of the freshwater aquatic plant Najas flexilis. The seeds of this species show some desiccation sensitivity, although post-harvest storage in water at 16 degrees C resulted in improvements in desiccation tolerance. There was 63% germination of seeds dried to 9.5% moisture content (30% RH) following this maturation period. Optimum moisture contents for seeds stored at -20 degrees C for 3 months and in liquid nitrogen for 1 week were ~11% and ~15%, respectively.     

Investigation into the rotational bands of ~(185)Pt with the particle-rotor model

Theoretical calculations have been performed for the ν9/2+[624](i13/2) and ν7/2-[503](f7/2) bands of 185Pt in the framework of particle-rotor model. The band properties of signature splitting and configuration mixing have been analyzed. The level energy and signature splitting before the band crossing can be well interpreted by introducing triaxiality. The positive-parity yrast band is pro posed to be dominated by the ν9/2+[624](i13/2) component, while the negative-parity band shows strong mixing of ν7/2-[5...     

Thermoresponsive reversible behavior of multistimuli pluronic-based pentablock copolymer at the air-water interface

Surface behavior of the pH- and thermoresponsive amphiphilic ABCBA pentablock copolymer has been studied with respect to the environmental conditions. We demonstrate that the pentablock copolymer poly((diethylaminoethyl methacrylate)-b-(ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)-b-(diethylaminoethyl methacrylate)) possesses reversible temperature changes at the air-water interface in a narrow pH range of the water subphase. Significant diversity in the surface morphology of pentablock copolymer monolayers at different pH and temperatures observed were related to the corresponding reorganization of central and terminal blocks. Remarkable reversible variations of the surface pressure observed for the Langmuir monolayers at pH 7.4 in the course of heating and cooling between 27 and 50 degrees C is associated with conformational transformations of terminal blocks crossing the phase line in the vicinity of the lower critical solution temperature point. The observed thermoresponsive surface behavior can be exploited for modeling of the corresponding behavior of pentablock copolymers adsorbed onto various biointerfaces for intracellular delivery for deeper understanding of stimuli-responsive transformations relevant to controlled drug and biomolecules release and retention.     

Supramolecular self-assembly of multiblock copolymers in aqueous solution

A unique pH-dependent phase behavior from a copolymer micellar solution to a collapsed hydrogel with micelles ordered in a hexagonal phase was observed. Small-angle neutron scattering (SANS) was used to follow the pH-dependent structural evolution of micelles formed in a solution of a pentablock copolymer consisting of poly((diethylaminoethyl methacrylate)-b-(ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)-b-(diethylaminoethyl methacrylate)) (PDEAEM25-b-PEO100-b-PPO65-b-PEO100-b-PDEAEM25). Between pH 3.0 and pH 7.4, we observed the presence of charged spherical micelles. Increasing the pH of the micelle solution above pH 7.4 resulted in increasing the size of the micelles due to the increasing hydrophobicity of the PDEAEM blocks above their pKa of 7.6. The increase in size of the spherical micelles resulted in a transition to a cylindrical micelle morphology in the pH range 8.1-10.5, and at pH >11, the copolymer solution undergoes macroscopic phase separation. Indeed, the phase separated copolymer sediments and coalesces into a hydrogel structure that consists of 25-35 wt % water. Small-angle X-ray scattering (SAXS) clearly indicated that the hydrogel has a hexagonal ordered phase. Interestingly, the process is reversible, as lowering of the pH below 7.0 leads to rapid dissolution of the solid into homogeneous solution. We believe that the hexagonal structure in the hydrogel is a result of the organization of the cylindrical micelles due to the increased hydrophobic interactions between the micelles at 70 degrees C and pH 11. Thus we have developed a pH-/temperature-dependent, reversible hierarchically self-assembling block copolymer system with structures spanning nano- to microscale dimensions.     

Measurement of στ product of solid state laser materials by an alternative method: Application to Nd3+ doped YVO4 crystal for 4 F 3/2→4 I 11/2 transition

In this paper an alternative approach for measurement of στ product for ⁴ F _3/2→⁴ I _11/2 transition of Nd³⁺ doped YVO₄ crystal is reported. In this method a microchip laser is formed by keeping a small piece of the sample in plane-plane resonator and a diode laser (808 nm) is used for pumping. The pump power induced thermal lensing effect is used to make the cavity stable. The cavity mode area is estimated by measuring the thermal lens focal length at the threshold and the average pump area is measured by Gaussian fit to the intensity profiles of the pump beam. The value of στ product of Nd:YVO₄ crystal obtained by this method is within 10% of the reported values. The advantage of this method is that it is a simple method for direct measurement of στ product of laser crystals.